mirror of
https://github.com/4gray/iptvnator.git
synced 2026-10-08 09:01:03 -08:00
af44e2368b678d30432858af6ef682e1f80a06e5
2939
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 4grayandClaude Opus 5.5
|
af44e2368b |
ci(performance): give the initial-bytes ratchet slack and a labelled override (#1744)
* ci(performance): give the initial-bytes ratchet slack and a labelled override The exact renderer.initialBytes counter failed PRs for reasons outside their diff: two concurrent merges left master 108 bytes over the baseline for hours, and bundler identifier renaming moves the counter by hundreds of bytes. PRs growing it by 243 and 302 bytes had no way to pass at all, because the direction check refuses any raised baseline. - Counter entries accept `slack` (integer, entry unit): the ratchet enforces `value + slack`, reports how much slack a measurement uses, and still prints the tighten hint below `value`. renderer.initialBytes gets 4096 bytes, so growth can accumulate at most 4 KiB past the last lowered baseline while regressions such as +35 KB still fail. - check-baseline-direction.mjs compares `value + slack`, treats widened slack like a widened tolerance, and takes `--allow-increase`, which reports weakened entries as ALLOWED instead of failing. - CI passes `--allow-increase` only when the pull request (or, for a master push, the pull request merged as the pushed commit) carries the perf-baseline-increase label, read from the API so a job re-run picks up a label added later. This change widens the slack itself, so its own PR needs the label. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0166PWobUjpoiWt8E9bBdsCs * fix(performance): report slack usage only for entries that have slack A wall-clock measurement above `value` but within `value × toleranceRatio` fell into the slack branch and was reported as using "slack", conflating timing tolerance with counter slack. Only entries with `slack` report it now. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0166PWobUjpoiWt8E9bBdsCs * fix(performance): scope the push-time label and refuse raised counter values - A master push compares the whole push, but the label was read from the head commit's PR only, so one labelled PR could cover another commit's increase in the same push. The label now counts only when the push added exactly one first-parent commit (a squash or merge of one PR); any other push that weakens a baseline fails. - Raising a counter's `value` while narrowing its `slack` lowered the enforced limit and was reported as "lowered". A counter's value is the measured evidence and only moves down, so that raise is now a weakening that needs the label. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0166PWobUjpoiWt8E9bBdsCs * fix(performance): treat a counter/wall-clock type switch as a weakening Turning `{ value: 100, slack: 10 }` into `{ value: 105, toleranceRatio: 1 }` skipped the raised-counter-value rule and was reported as a lowered limit. Switching an entry between counter and wall-clock now needs the perf-baseline-increase label. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0166PWobUjpoiWt8E9bBdsCs * ci(performance): paginate the label lookups of the direction check The labels endpoint returns 30 entries per page by default, so a PR with more labels could miss perf-baseline-increase. Both lookups now request 100 per page and paginate, like the release-note gate. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0166PWobUjpoiWt8E9bBdsCs --------- Co-authored-by: Claude <noreply@anthropic.com> |
||
|
|
f0765012fa |
fix(playback): stop external player position polling that starts after exit (#1720)
MPV and VLC wait 2 s and 1.5 s before their first position poll, but the delay timer was never stored, so stopping the poll during that wait could not cancel it. A player that exited, errored or was replaced early left a 5 s (MPV) or 2 s (VLC) interval polling a dead socket or RC port until the next launch or app quit. Keep the delay handle and clear it with the interval. Co-authored-by: 4gray <fourgray@proton.me> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
36be6495f2 |
perf(dashboard): hold rail skeletons back so empty rails stop shifting the page (#1738)
* perf(dashboard): hold rail skeletons back so empty rails stop shifting the page On every launch with sources the dashboard shifted by about 0.23 (the "good" CLS threshold is 0.1). The rails render as soon as their own data arrives, and each loading rail showed a 328 px skeleton immediately. On a normal profile the live-favorites and recent-content sources resolve empty 15-20 ms later, so their skeletons flashed and collapsed and every rail below jumped up by about 360 px. J1 never saw it: its layout-shift window ends at the first card, which is painted just before the collapse. Rail skeletons now wait out a 300 ms grace period (createRailSkeletonGrace) and appear only for a rail still loading after it; the hero keeps its immediate skeleton because it reserves the top of the page. Recorded over three renderer reloads of a seeded profile, the dashboard's layout shift drops from 0.219-0.234 to 0.0004, with the real rails painted at the same time as before. Plan thread C5, journey J1. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(dashboard): gate rail skeletons per rail, never above visible rails Addresses the Codex and Greptile reviews on #1738. The component-wide grace timer started when the dashboard was created, so a rail that begins loading later (Xtream recently added, TMDB) showed its skeleton at once and could still flash and collapse; and after the grace period a slow rail's skeleton could appear above rails that already showed cards, pushing them down and, if it resolved empty, back up. createRailSkeletonGates now keeps one gate per rail, in template order: the grace period counts from that rail's own loading start, a skeleton is never inserted above a rail that already has cards (the real rail inserts at most once instead), and a shown skeleton stays until its own rail finishes so the first arriving rail does not collapse the others in a cascade. Nine specs cover the fast path, per-rail start, the no-content-below rule, latching, reloading, destroy and a zero grace period. The seeded-profile timeline is unchanged at 0.0004 across three renderer reloads. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: 4gray <fourgray@proton.me> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
d8229b98fa |
feat(playback): record recently viewed only after the stream plays (#1732)
* feat(playback): record recently viewed only after the stream plays A channel, movie or episode used to enter Recently Viewed (and the dashboard's Continue Watching hero) the moment it was selected or its link was resolved, so streams that failed straight away cluttered the history. Writers now defer the write to a root PlaybackHistoryGate, keyed by the stream URL and/or the playback session key. The inline players confirm those keys once the owned engine's position has advanced by two seconds (seeks, stalls, pauses and a previous stream's progress do not count), the radio player does the same, and a launched MPV/VLC session confirms on `opened`/`playing`. M3U with MPV/VLC configured keeps recording on selection. Covers M3U (live, radio, movie detail), Stalker (live, radio, VOD, series), Xtream VOD and series, and the global live collection. The M3U host's embeddedPlayback is now compared by value: the history write updates the playlist meta mid-playback, and a new but identical playback object remounted the engine and restarted the stream. E2E flows that relied on recording-on-click now play local fixtures (HLS/TS/WebM routed in place of unreachable or public streams) and wait for confirmed playback. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(playback): tighten recently viewed confirmation per review - Correlate by session key first: when both the deferred write and the confirmation carry a playbackSessionKey, only that is compared, so the same stream URL played in another playlist no longer records a failed attempt. URLs remain the fallback (portal writes, MPV/VLC sessions). The M3U radio player now receives the host's session key. - Count only playing progress: engines report `playing` (not paused, not seeking) with each time update, so short seeks of paused media no longer confirm a view. - Xtream: a write confirmed after a playlist switch still saves to its own playlist but no longer replaces the current playlist's recent list. - Global live tab: a row confirmed after another row was selected still moves to the top of an open Recently Viewed list (only a disposed tab skips the notification). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(playback): confirm session-keyed history only by its own session A write deferred with a playback session key (M3U) is now confirmed only by that key. The app-wide MPV/VLC session confirmation carries just the URL, so opening the same stream externally from another playlist could still commit an abandoned attempt. An "Open in MPV/VLC" recovery launch is instead confirmed by the WebPlayerViewComponent that requested it, under its own session key, once the launch has opened. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * perf(playback): keep the history gate off the initial bundle The `@iptvnator/services` barrel ships in the initial bundle, so adding PlaybackHistoryGate there (and subscribing to it from the app-wide ExternalPlaybackService) grew renderer.initialBytes by 1,141 bytes. - Move the gate to a new lazy-only `playback-data-access` project (`@iptvnator/playback/data-access`; scope:shared, domain:playback, type:data-access) and register it in the coverage policy. - The gate subscribes to MPV/VLC session updates itself; it is created by the first deferred write, which precedes the launch it waits for. ExternalPlaybackService is back to master. - The Xtream "playlist switched before confirmation" check moves to the lazy helper; the initial-path store only takes a `skipListRefresh` flag. Net effect on this branch: +27 bytes over master (master itself is 108 bytes over the ratchet baseline already). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * perf(playback): drop late Xtream confirmations off the initial path The Xtream store ships in the initial bundle, so even the small `skipListRefresh` flag cost 27 bytes there. A confirmation can only arrive after a switch to another playlist from a slow MPV/VLC launch (the inline player goes with the page), so the lazy helper now drops it instead: recording it would misfile the item or replace the other playlist's recent list. with-recent-items is back to master. This branch is now 3 bytes below master on renderer.initialBytes; the ratchet still reports master's pre-existing overage. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * test(playback): pass the spec type-check gate from master - playback-data-access: align tsconfig.spec.json with the epg-data-access config #1705 updated (bundler resolution, global.d.ts for window.electron). - M3U recent-history spec: type the selectSignal override. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(playback): keep late Xtream confirmations in their own playlist history A confirmation that arrives after a switch to another playlist (a slow MPV/VLC launch) is no longer dropped: the lazy helper saves it to the captured playlist through the data source, without reloading the store's recent list, which belongs to the other playlist by then. The store and its barrel ship in the initial bundle, so the save path stays in the feature helper; renderer.initialBytes stays under the baseline. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(playback): correlate global live-tab history by its session key The unified Favorites/Recent live tab deferred its history write by stream URL only, so the same URL played from another playlist could confirm a failed selection, and a switch to catch-up before confirmation could never match. It now defers with the tab's playlist-scoped playbackSessionKey (the key its players confirm with), and the tab's radio player receives it too. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(playback): keep MPV/VLC rows of the live tab confirmable by URL The live tab's session key can only be confirmed by its own inline players; MPV/VLC confirm the launched URL alone. A row that goes to an external player (also later, after a double-click) now defers by URL, and only rows played inline carry the session key. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(playback): per-channel M3U history attempts, capability-based Xtream fallback - M3U: the recently-viewed dedupe key now includes the channel id, so a second row of the same URL defers its own write (its session key) and is recorded when it plays after the first row failed. - Xtream late write: key uncached content by Xtream id per supportsXtreamSqliteDataSource (the data-source factory's contract), not by a generic Electron bridge. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: 4gray <fourgray@proton.me> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
4gray
|
be217d5cf5 | feat(playback): Hybrid redesign of the shared player controls (#1709) | ||
|
4gray
|
8b570e3390 | test(performance): measure two-byte string cost in M3U and XMLTV parsing (D1) (#1713) | ||
|
4gray
|
363411542f | fix(workspace): describe settings in the command palette search label and empty state (#1726) | ||
|
4grayandClaude Opus 5.5
|
a0562d9f7c |
fix(portal): drop a poster that fails to load from the About block (#1673)
The watch-state About block rendered its poster whenever the URL was non-empty, so a URL that failed to load showed the browser's broken-image glyph with clipped alt text. The hero above already falls back on error. A failed URL now counts as missing, matching the block's own degradation rule. The failure is keyed by URL so a different poster gets a fresh attempt. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
6b855eb73b |
fix(e2e): stop mock servers from outliving Playwright runs (#1710)
* fix(e2e): stop mock servers from outliving Playwright runs Playwright stops a webServer with a SIGKILL to the process group it spawned, but `nx run-commands` starts its command in a detached process group of its own. Launching the Xtream/Stalker mocks through `pnpm nx run *-mock-server:serve` therefore left the tsx server running (reparented to PID 1) and holding its port after every run, so the next run failed with "…/health is already used" or silently reused a stale server. Every Playwright config now starts the mocks as a single `node --import tsx apps/<mock>/src/main.ts` process with TSX_TSCONFIG_PATH=tsconfig.base.json, which stays in Playwright's group. A project-config spec guards all playwright*.config.ts files against regressing to the Nx launch. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(e2e): read sidebar categories atomically; tighten mock launch guard - category-management: readVisibleSidebarCategoryNames read items one by one; when Save removed an item between isVisible() and textContent(), textContent() auto-waited for the gone label through the whole 15 s poll, so expect.poll never retried (ubuntu shard 1 failed 3/3 while the UI already showed "No categories available"). Take one snapshot with filter({ visible: true }).evaluateAll() instead. - project-config.spec: pin which Playwright configs start which mock, reject any Nx form that mentions a mock server, and fail when a new config starts a mock without being listed (the old count check passed vacuously on zero matches). - docs: state which configs start which mock instead of "every config starts both". Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * revert(e2e): leave the sidebar category read race to #1728 #1728 fixes the same readVisibleSidebarCategoryNames race with a shared helper; keeping a second copy here would only conflict. This PR stays about mock-server lifecycle. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: 4gray <fourgray@proton.me> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
4gray
|
807b5ea259 | docs(website): illustrate feature guides with app screenshots | ||
|
4gray
|
887ac64d18 | feat(workspace): cinematic rotating dashboard hero (#1725) | ||
|
|
1d9a563d1a |
test(performance): count startup phases and SQL statements for the J1 launch journey (#1715)
* test(performance): count startup phases and SQL statements for the J1 launch journey
Implements plan item A2. With IPTVNATOR_PERF_CAPTURE=1 the main process
keeps named counters and registers a main-only performance:read-counters
IPC handler; without the flag nothing is counted and the handler does not
exist.
- debug-trace.ts owns the registry; traceStartupPhase replaces the
trace('startup', ...) sites and counts main.startupPhases.
- The database worker counts executed statements through better-sqlite3's
Statement prototype (the verbose callback expands every statement and
made bulk inserts 2-4x slower) and posts the count over its message
port, flushed before every other worker message. The main-thread shared
connection is counted through a new connection observer in the shared
database library.
- The first main window freezes main.modulesRegisteredBeforeWindow at
creation and main.sqlStatementsBeforeReadyToShow at ready-to-show.
- The journey gate drops the ready-to-show that Electron emits for the
about:blank detour, so the app sees the real document's first paint,
and taps the counters handler; the J1 record reads both counters after
the renderer probe completes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(database): require one SQL statement per exec during initialization
The performance capture counts one exec call as one statement, because
SQL cannot be split reliably in the counter (trigger bodies contain
semicolons). The historical-upgrade driver now wraps exec on every
connection initDatabase opens and fails on a batch, so that counting
assumption holds for the fresh profile and all historical schemas.
Documents the definition in the counter and the architecture docs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(performance): count SQL statements only for the launch journey
Codex review: the M3U import, refresh-cancellation and Xtream benchmarks
also run with IPTVNATOR_PERF_CAPTURE=1, so the statement hook wrapped
every row of their bulk inserts and changed what they measure.
SQL counting now also needs IPTVNATOR_PERF_COUNT_SQL=1, which only the
launch journey sets; a harness test fails if another source sets it.
Startup phases, the window snapshot and the read handler stay on the
capture flag. Without SQL counting no ready-to-show listener is attached,
so a zero is never reported for statements nobody counted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: 4gray <fourgray@proton.me>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
|
31c2cb3bbc |
test(e2e): read sidebar categories in one snapshot inside polls (#1728)
The "allows restoring live categories after every category is hidden" Electron test failed intermittently on shard 1 across unrelated PRs and master. The app hid every category correctly (the failure screenshot shows "No categories available"), but readVisibleSidebarCategoryNames looped over count() with per-row nth(index) reads. When the sidebar removed a row between isVisible() and textContent(), textContent() auto-waited for the missing element, so the expect.poll predicate never returned and the poll timed out with "waiting on the predicate" instead of retrying. Read the visible rows with a single evaluateAll() snapshot in a shared sidebar-categories.e2e-support.ts helper, use it for the category picker in category-management and backup-roundtrip too, and record the rule in the validation map. Co-authored-by: 4gray <fourgray@proton.me> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
650da4a1d3 |
ci(test): type-check Jest spec programs and gate it in CI (#1705)
* build(test): make spec tsconfigs resolve what Jest resolves Lib spec tsconfigs used module: commonjs with node10 resolution, which cannot see Angular's exports-only secondary entry points, and dropped global.d.ts, so tsc reported thousands of resolution errors and no window.electron typing. Switch them to module: preserve with bundler resolution (ts-jest still forces CommonJS emit outside ESM mode), add global.d.ts to every spec program, type jest.unstable_mockModule for the ESM workspace, include the ui-epg and ui-playback specs that jest.web-esm.workspace.ts runs under the web spec config, and drop the snack-bar stub that shadowed the real Material types. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * ci(test): gate spec type-checking with typecheck:spec Add tools/typecheck/spec-typecheck.mjs, which runs tsc --noEmit over every tsconfig.spec.json with a small pool and fails on any diagnostic, wire it into the unit-and-typecheck job after typecheck:ci, and document the gate and the spec tsconfig conventions in the validation map. Also bring the non-Tier-A spec configs (remote-control-web, ui-remote-control, stalker-mock-server) to the same conventions so the gate covers the whole workspace. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * test: fix the spec type errors surfaced by typecheck:spec With the spec programs resolving modules and ambient typings correctly, tsc reported 432 genuine errors across the Tier A projects: read-only capability flags assigned on Partial<> doubles, signal-store values used as types, fixtures missing required fields, index-signature property access, partial bridge doubles cast through incompatible shapes, and deferred resolvers narrowed to never. Type the doubles instead of casting to any: writable mapped types for capability flags, InstanceType<typeof StalkerStore>, typed jest.fn signatures, protectedState: false on test signal stores, and completed fixtures. Production changes are limited to bracket access for index-signature properties under the libs' noPropertyAccessFromIndexSignature setting and two narrowing guards in the global favorites loader. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * test(playback): use the ESM setup's jest global in the controls fixtures The fixture imported jest from @jest/globals, which is not a direct dependency. Jest provides that module at runtime, so tests passed, but on a clean pnpm install tsc cannot resolve it and typecheck:spec failed in CI. The ESM test setup already installs import.meta.jest as the global, typed by @types/jest, as the other ESM specs use it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * test: type the parental lock doubles merged since the gate was written The parental lock feature (#1601) and the Stalker actor route landed on master with spec doubles declared as zero-argument jest.fn()s that the tests then drive with the real arguments, plus a copy of the ResizableDirective override imported from a library that does not export it. Give the doubles the lock service's real signatures, drop the dead override as in the sibling layout specs, use bracket access for the actor route's personId param, and keep the Stalker layout spec within the 1200-line limit. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: 4gray <fourgray@proton.me> Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
|
69056487bc |
ci(performance): run the performance journeys on the Linux runner (#1717)
* ci(performance): run the performance journeys on the Linux runner Adds a warn-only performance-journeys job to ci.yml that builds the electron-performance configuration, runs the journey benchmarks under xvfb and uploads dist/performance/journeys/ as evidence. Pull requests run it only when they touch journey-relevant paths. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs(performance): document the journeys CI job and runner evidence Describes the performance-journeys job and its path gate, and records why the J1 runtime counters are not baselined yet: on the Linux runner the launch journey is bimodal (13/576 vs 16/939 bridge calls/DOM mutations), so the counters are not deterministic. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * ci(performance): run the journeys unless a PR changes only safe paths The scope filter listed the paths that can move a journey, so a PR that changed only a root build input (.nvmrc, nx.json, tsconfig.base.json) skipped the measurement. List the paths that cannot instead: the E2E workflow's ignore list plus release notes. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: 4gray <fourgray@proton.me> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
9d02f90dfe |
perf(web): keep backup/restore and portal helpers off the initial path (#1734)
* perf(web): keep backup/restore and portal helpers off the initial path #1601 (parental lock) put about 35 KB onto the renderer's initial path by design (the lock service, lock store and enforcement gate the workspace resolver and the catalog data sources) and was merged with the ratchet red: renderer.initialBytes 1,655,428 against the 1,619,993 baseline. Offset it without touching the lock gate. Code splitting puts a module in the chunk shared by every entry that reaches it, so helpers only lazy routes use landed in initial chunks because eager files reach them through barrels: - PlaylistBackupService (only the lazy settings page) moves to @iptvnator/services/playlist-backup and out of the services barrel. - The eager Xtream data layer and root shell import the portal logger and DI tokens through @iptvnator/portal/shared/util/logger and /tokens instead of the barrel, whose navigation, keyboard-shortcut and download helpers (about 45 KB) belong to the lazy portal routes. renderer.initialBytes 1,655,428 -> 1,598,232 bytes (-57,196). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * chore(performance): lower the initial-bytes baseline to 1,598,232 bytes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: 4gray <fourgray@proton.me> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
4gray
|
4c1403f545 | docs(website): publish the multi-channel EPG guide | ||
|
|
e45cd85a78 |
feat(settings): PIN-protected parental lock for categories (#285) (#1601)
* feat(settings): add PIN-protected parental lock for categories (#285) Locks are per category (Xtream category ids, Stalker genre ids, M3U group titles) and kept in one renderer lock store persisted to app_state / localStorage; `categories.locked` is the SQLite index re-stamped from it. While the lock is active the DB worker filters every content read, the PWA data source, the Stalker store and the M3U channel list filter in memory, and the enforcement service reloads the stores and steps off withheld selections. Settings → Parental lock sets the PIN (PBKDF2, never in Settings), the relock timeout and Lock now; lock toggles live in the Xtream/M3U management dialogs and a new Stalker lock dialog, all behind the PIN. Backups carry the locks per playlist entry. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): harden the parental lock after review - The M3U group dialog opens only after the PIN, like the Xtream and Stalker dialogs: it lists locked group names and can rewrite the locks. - Change PIN and Disable always verify the stored hash, even while the session is unlocked, so an app left unlocked cannot lose its lock. - Stalker paging judges progress on the raw portal page: withheld ids the list has not seen count as progress, a page made only of locked rows requests the next one itself, and the VOD total is reduced by withheld ids so the grid stops asking once every visible row is in. - Parental lock contract linked from the agent context map after the guidance reorganization; bridge helpers split out to stay under the file-size cap. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): guard locked categories on routes, PWA search and paging - Xtream and Stalker `:categoryId` routes carry a parental-lock guard: a locked category reached by URL prompts for the PIN and redirects to the section root on refusal (Electron row ids are mapped to provider ids). - PWA search filters withheld categories like the catalog reads. - Electron warm-cache detection confirms an empty, lock-filtered read with the unfiltered existence check instead of refetching from the provider. - A Stalker lock flip past page 1 drops withheld rows at once and restarts the list from page 1 instead of appending onto stale pages. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): compile the PIN hashing helper in the Node backend build The web backend compiles the shared interfaces library without DOM typings, so the DOM-only `SubtleCrypto` / `BufferSource` names broke its Docker build. The helper now describes the WebCrypto surface it needs structurally and reaches it through `globalThis`. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): close the remaining parental-lock gaps from review - Detail routes check the item's own category: a locked movie or series paired with an unlocked category id in the URL is still refused. - `requestUnlock()` awaits the settings load before it can answer "not active", so a slow startup cannot open a management dialog unguarded. - `SETTINGS_UPDATE` only persists the `parentalLockEnabled` mirror and releases the worker on switch-off; it no longer re-locks the worker on every ordinary settings save under a renderer that shows "unlocked". Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): cover PWA cold navigation, Stalker search and the PWA lock editor - The Xtream detail guard hydrates the PWA session cache before judging an item on a cold navigation and fails closed when the catalog cannot place the item. - The dedicated Stalker search route filters withheld genres, re-fires on lock changes, judges paging on the raw page and restarts from page 1 on a lock flip. - The Xtream category dialog loads its lock candidates through the capability-selected data source; the PWA source now lists its raw categories with lock flags, so locks can be configured there too. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): arm the relock timer on enable and harden Stalker search relock - The idle timer follows the unlocked transition instead of `active`, so the session that just enabled the lock still locks itself later. - Stalker search closes an open detail whose genre became withheld on relock and advances by itself past pages made only of locked rows (only while they add ids the list has not seen). Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): close lock editors on relock and clear withheld details opened from All The Xtream, Stalker and M3U category editors are gated by the PIN only when they open; an idle relock left them on screen listing locked names with a lock-rewriting Save. Each now closes itself when the session relocks. ParentalLockEnforcementService also judges the selected Xtream/Stalker item by its own category: a detail opened from All, recently added or search has no selected category to vanish with, so it stayed open after a relock. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): fail closed on unreadable settings and finish relock clean-up - Unreadable settings (IndexedDB load failure) left the feature switch at its default and announced "unlocked" to the main process. A stored PIN now stands in for the switch, and without one nothing is announced, so the worker keeps its mirrored locked default. - Lock applies run one at a time and abandon superseded results; the Electron data source keys its in-flight share by lock version so a relock can never reuse an unlock refresh's unfiltered rows. - The stored in-portal Xtream search is re-run on a lock change. - Stalker live/radio selections are judged by tv_genre_id, and both live layouts drop the playback of a channel whose category became withheld. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): fail closed on an unreadable lock store and make lock writes reliable - A lock store that cannot be read is no longer treated as empty: while the lock is active every category is withheld (renderer predicates and set-based filters alike) until the PIN is entered or the store reads again, and writes are refused meanwhile so an empty in-memory store can never wipe the persisted locks. The lock set now lives in its own ParentalLockLockStore service. - The M3U group dialog's lock write is awaited and a failed save is reported in a snackbar instead of being silently dropped. - The Electron categories.locked re-stamp clears and re-locks inside one transaction, so a failed restamp keeps the previous index. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): drop pre-relock Stalker search pages and fail closed on a corrupt lock store - A Stalker search page issued before a relock was filtered with the pre-relock withheld set and could still be applied after it; the staleness check now includes the parental lock version. - A lock store payload that does not parse or is not an object is a failed read (everything withheld until it reads again), no longer an empty store. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): close the startup, re-stamp, relock-refresh and switch-persistence gaps - The window before the initial lock store read settles now withholds everything, like an unreadable store: settings can report the feature as on before the locks are known. - The store commits before the SQLite index re-stamp; a failed re-stamp now rolls the store back, a failed rollback re-stamps on the next access, and every launch re-derives the index from the store. - Xtream category/content reloads fail closed: a rejected reload empties the affected lists (content types drop back to idle) instead of keeping rows read under the previous lock state. - Enabling/disabling the feature persists through one guarded path that undoes the in-memory switch and skips the Electron mirror on a failed settings write. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * test(xtream): move the parental-lock reload specs beside the content spec The content feature spec sits at the 1200-line spec cap. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): await the startup lock-index reconciliation and withhold genre-less rows when failing closed - The lock store is readable only once the SQLite index has been re-derived from it, and a re-stamp that keeps failing keeps the session fail-closed, so catalog reads can never serve rows stamped unlocked by a stale index. - While everything is withheld, Stalker rows without a genre are withheld as well (the store filter and the renderer predicate). Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): await the enablement mirror, restore partial lock stamps and validate nested lock-store entries - The Electron mirror of the feature switch is awaited; a mirror that cannot be written undoes the settings write, so a reload never starts from a mirror that disagrees with the persisted switch. - A failed multi-type re-stamp rolls the store back AND re-stamps every touched type from it, since earlier types may already carry the new locks; a failed rollback keeps the playlist stale (fail-closed). - A persisted lock store whose nested entries are not what writeLocks produces is a failed read, not an empty store. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): withhold the Xtream catalog at relock time, keep exact M3U titles in backups, roll back a failed relock-timeout save - A relock now fails closed immediately: the selected detail is stepped off against the lock store, the catalog lists and stored search results are emptied, and the filtered reloads publish only while the captured lock version is still current. - Backups carry M3U lock titles verbatim (exact dedup), since the locks match group titles exactly. - A relock-timeout write that fails reverts the in-memory value and shows the settings save-failure snackbar. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): clear the lock index before a playlist's last lock leaves the store, retry failed PIN reads, guard backups on the lock store - A write that removes a playlist's last lock clears the SQLite index first and drops the store key afterwards, so an interruption between the two can only leave a state the startup reconcile repairs toward locked. - A PIN hash read failure is distinct from an absent PIN: the session stays locked and every PIN-protected step re-reads it first. - Backup export awaits parental lock initialization and refuses to run while the lock store is not readable, since an absent lock field means "no opinion" on restore. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): withhold Electron Xtream reads while locks are unknown, persist the switch when settings are unreadable, re-stamp after a recovered read - ElectronXtreamDataSource serves no categories, content or search hits while the lock store withholds everything; its SQLite index may still carry a stale stamp. - setupPin decides whether to persist the switch from the settings value before the PIN is stored, since enabled follows hasPin while the switch is unknown. - A lock store recovered by a later read marks its playlists stale so the index is re-derived, a persisted entry must carry all three lists, and a stale Stalker search page is dropped before touching the withheld-id bookkeeping. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): keep unlocked category routes reachable and defer a relock reload that overtakes the initial hydration - The Xtream category guard no longer runs the item check on category-only routes (Number(null) is 0), which prompted for the PIN on every unlocked VOD and series category while the lock was active. - A lock change during the initial Xtream hydration withholds the rows the hydration publishes and runs the filtered reload once it has settled, on every path that marks the content initialized. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): resolve hidden live categories before relocking playback and reload categories in the deferred hydration path - The Xtream live layout resolves a playing channel's category through the unfiltered rows when the visible list lacks it (search can play a hidden category's channel); until that lookup lands the category is unknown and a relock stops the channel. - A relock that overtakes the initial hydration now withholds the category publications too and reloads categories with the content. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): step off the M3U channel and Stalker selection before awaiting the Xtream relock reload The Xtream store stays populated after leaving that portal, so its reload runs on every apply; a locked M3U channel no longer keeps playing behind a slow database or provider read. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): gate the workspace on parental lock init, edit only a readable lock store, guard the deferred reload, validate backup lock entries - The workspace route resolver awaits ParentalLockService.initialize() next to the settings load, so no route or catalog activates before the PIN and lock store are known. - Every lock write re-reads a failed store before building its edit, so a recovered store is edited rather than overwritten. - The deferred hydration reload runs under the publish guard of the request that deferred it. - Backup import validates every parental lock entry and rejects a damaged list instead of erasing the persisted locks on restore. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): discard stale hidden-category lookups and key withheld Stalker rows by their real identity - A hidden-category lookup that lands after a later playback (same provider id, another playlist) no longer overwrites the newer channel's category; resolutions are generation- and playlist-checked. - Withheld Stalker rows are keyed by id, stream_id, movie_id, series_id or the row's cmd/name, so id-less rows no longer collapse onto one key and stall paging past locked pages. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): gate the Electron cached category/content reads while locks are unknown The warm-route hydration reads the cache directly; it now returns nothing while the lock store withholds everything, like the live reads. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): retire in-flight searches on relock clearing and publish lock revisions after the stamps - clearSearchResults() advances the search request version, so a search issued under the previous lock state cannot republish what a relock just cleared. - A lock write publishes its store revision only once every touched type is stamped, so a reload triggered by it cannot read a later type through its old stamps. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): retire a resolving Stalker live playback when the session relocks The embedded player defers selecting the channel until its stream resolves, so the enforcement service's cleared selection could not retire the request; it now carries the lock version it was issued under and is dropped when a relock happened meanwhile. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * feat(settings): one lock entry point per rail plus a right-click Lock/Unlock - Stalker's dedicated lock button becomes the same "Manage categories" (tune) button the Xtream rail has; it opens the lock-only dialog, so every portal type shares one entry point and the rail header keeps three actions. - Right-clicking a category (Xtream, Stalker) or an M3U group offers a single-row Lock / Unlock through the shared CategoryLockMenuComponent, behind the same PIN gate and lock store as the dialog. - The settings hint explains where locks are set; group lock strings added to all locales (ru/de translated). Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(settings): serialize lock-store writes and drop a deleted playlist's locks - Lock-store mutations run through one write queue: each rewrites the whole persisted store, so overlapping edits could otherwise snapshot the same store and the later write would drop the earlier edit. - Deleting a playlist removes its locks through the PLAYLIST_DELETE_CLEANUP hook; "Remove all playlists" clears the lock store once the deletion has succeeded. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): apply single-row lock toggles inside the lock store's write queue The right-click Lock/Unlock (portal categories and M3U groups) built the new list before entering the queue, so two quick toggles shared one snapshot and the second dropped the first. Lock writes now accept an edit of the current list, evaluated inside the queue. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): retry a failed settings read before any parental-lock settings write updateSettings writes the whole settings object, which after a failed startup read is the defaults; enabling the lock or changing the relock timeout then replaced the user's persisted preferences. The read is retried first and the write refused while settings stay unreadable. The settings writes move to parental-lock-settings-writer.ts. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): show the locked-groups row on the M3U rail and roll the relock timeout back to the recovered value - The M3U groups rail now renders the same "N locked · Enter PIN to show" row as the portal category rail, so locked groups no longer vanish without an in-context unlock. - A failed relock-timeout write rolls back to the value read after the settings retry, not to the pre-retry default. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): retry a failed clear-all of the lock store and keep restored new playlists free of stale locks A lock-store clear that failed after "Remove all playlists" only logged, so a later restore reusing a playlist id could inherit the deleted playlist's locks. The in-memory store now empties at once and the persisted clear is retried on the next access; a restore that creates a playlist starts it from empty locks. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): count radio playback as lock activity and read the lock store before a restore's stale-id check - The idle relock no longer interrupts a playing radio station: playing <audio> counts as activity, like video. - A restore retries a failed lock-store read before checking a reused id for stale locks, and aborts while the store stays unreadable. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): drop withheld Stalker search rows at relock time and keep the M3U unlock row when every group is locked - A relock during a page-1 Stalker search now filters the rows already on screen at once, so old unlocked results are not clickable while the replacement page is pending. - When every M3U group is locked the groups rail still renders, with its "N locked · Enter PIN to show" row, instead of the plain empty state. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * perf(settings): keep the PIN dialog and the Stalker enforcement step off the initial path Master (#1712) moved the UI component barrel and the Stalker data layer out of main.js and tightened the initial budget to 2 MB. The parental-lock prompt imported the PIN dialog through the ui/components barrel and the enforcement service injected the Stalker store at startup, which pulled both back in (2.55 MB, over budget). The PIN dialog now loads through a local lazy file on the first prompt, and the Stalker step loads only while a Stalker route is open: initial total 1.65 MB. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): restore the lock index when an emptying write fails and publish rollbacks after re-stamping - Removing a playlist's last lock clears the SQLite index first; if the clear or the store write then fails, the index is re-stamped from the previous locks at once. Title matching and multi-source discovery query the worker directly and trust the index, so the stale flag alone did not protect them. - A rollback publishes its store revision only after every type is re-stamped, so a reload cannot read a later type through the attempted stamps. - docs: restore the index rules the earlier surfaces rewrite dropped from the contract, now in the Lock store lifetime section. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): keep the M3U groups view when every group is locked With every group locked the filtered channel list is empty, so the container showed its generic empty state and the groups rail's "N locked · Enter PIN to show" row never appeared. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): fail closed when the lazy Stalker enforcement step cannot load A rejected chunk (e.g. a stale PWA page after a deployment) escaped applyStalker(), so a locked Stalker selection kept playing after a relock and the Xtream step was skipped. The step now leaves the Stalker route on a load failure, which clears the selection and stops playback, and the Xtream step still runs. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): defer a stale Xtream hydration as soon as the catalog is withheld On Electron a relock that overtook the initial content hydration waited for the category reload before the content reload set the deferral flag; the older unlocked hydration could publish its streams in that window. withholdCatalog() now sets the flag itself, before anything is awaited. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): restore backup locks after the Xtream merge and snapshot the Stalker lock dialog's categories - A backup restore now writes the parental locks last, so a failed Xtream merge leaves the playlist's previous locks in place instead of the backup's possibly smaller set. - The Stalker lock dialog snapshots the category list before its lazy import and opens only if the route is unchanged, so another portal's categories can never be saved under this playlist. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): fail closed on relock ahead of the apply queue and judge Xtream selections by the lock store - On relock the synchronous fail-closed steps (M3U channel, Stalker selection, the locked Xtream detail, catalog lists, stored search) run immediately instead of queueing behind an earlier apply that may still wait on a slow or hung read. - The post-reload Xtream checks decide by the lock store through the unfiltered category rows rather than by absence from the reloaded list, which also omits merely hidden categories; unreadable rows fail closed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): require the PIN for lock-bearing backup restores and fail closed during index re-stamps - A backup carrying lock lists replaces the matching playlists' locks, possibly with an emptier set; the import now asks for the PIN (after the file was chosen) and aborts when it is refused. - While a write re-stamps the SQLite index the playlist counts as stale, so a relock inside that window reloads fail-closed instead of through the old stamps. The internal store write now needs only a readable store, so a rollback can still land. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): drop parental-lock Xtream reloads once the playlist is switched A reload issued for playlist A no longer publishes into the shared Xtream store after the user opened playlist B: the store's reloads guard on the playlist they read for, and the enforcement apply retires its search refresh and selection checks on a playlist switch as on a newer lock version. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): re-ask the PIN before a relocked backup merge and keep the PIN cooldown across prompts A backup merge now asks for the PIN again right before it replaces a playlist's locks when the app relocked during the import, instead of relying on the answer given at the start. The wrong-PIN count and the 30-second pause move from the dialog into the lock service, so dismissing and reopening the prompt no longer resets them. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): refuse lock removals that commit after a relock and keep the index stale until the store write lands Lock edits that take a lock away now commit only while the session is unlocked, checked inside the write queue at commit time, so an editor save still in flight (or queued) when the app relocks cannot remove locks. Adding locks stays allowed. The Xtream category dialog drops its lock draft after a relock, and a backup restore re-asks the PIN only when it would remove a lock. Clearing a playlist's last lock keeps its index stale until the store write has landed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): clear an Xtream detail from a hidden category synchronously on relock The synchronous relock step now clears a selected Xtream item whose category the visible category list cannot place (a manually hidden category opened through search), instead of leaving it usable until the awaited reloads and lookup finish. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): fail closed when the Electron bridge lacks the parental lock worker filter A new runtime capability requires the lock-state and index-stamping IPC. When Electron reads Xtream through the SQLite worker without it (a partial or older preload), the locked session withholds every category instead of trusting a worker that never learned the lock state. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): re-check lock removals at their durable commit points A lock removal that passed the unlocked check before its write is asked again right after the store write and, for Xtream, after the index stamps. A relock in between writes the previous store back or rolls the stamps back before anything is published. The stale-index bookkeeping, index stamping and store merge move into helpers to keep the lock store within the file size limit. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): retry a failed revert of a refused lock removal and fail closed meanwhile When writing the previous store back after a relock-refused removal fails, the lock store now keeps a pending rewrite, is not readable (the locked session withholds everything) and rewrites the persisted store from memory on the next access, so a restart cannot load the removal. A failed "Remove all playlists" clear shares the same retry. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): authorize lock removals when issued and close genre-less Stalker details in fail-closed mode A lock removal is now authorized right before its first write is issued; a relock that lands after that is ordered after the write, which completes. This drops the post-write rollback, whose own failure could leave the persisted store diverged from memory across a restart. The Stalker search closes a detail without a genre on relock while every category is withheld. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): restore the previous locks when an Xtream rollback write fails When an Xtream lock edit's re-stamp fails and the rollback store write fails too, memory now goes back to the previous locks and a pending rewrite persists them on the next store access before the index is re-stamped, so the failed edit cannot take effect through that re-stamp. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * test(stalker): cover page-one rows leaving the screen on relock while the reload hangs Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): offer the portal unlock row in fail-closed mode When the lock store cannot be read every portal category is withheld but no locked ids are known, so the rail showed no "Enter PIN to show" row. It now shows the row without a count in that state. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): fail closed for direct worker title lookups and capture the Stalker lock dialog context before the PIN Catalog title matching and multi-source discovery query the SQLite worker directly; they now return nothing while the parental lock withholds everything (unreadable store or a bridge without the worker filter). The Stalker lock dialog captures its playlist, provider and section before the PIN prompt and re-checks them after it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): retire multi-source alternatives on a lock change and keep reconcile off in-flight stamps The VOD multi-source host keys its discovery session to the parental lock version: a lock change drops the discovered sources, retires discoveries and switches in flight, and rediscovers through the worker's new lock state. Stale-index entries of a write still stamping are no longer retried by a concurrent reconcile, which could re-stamp from a store the write had not committed yet. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): fail closed on a rejected worker lock sync, tear down Stalker synchronously and capture the Xtream dialog context before the PIN - A rejected lock-state sync to the SQLite worker makes the locked session withhold everything until a later sync succeeds. - The Stalker enforcement chunk is preloaded when a Stalker route opens; a relock runs it synchronously, or leaves the route at once while it is not loaded, instead of awaiting the chunk. - Xtream "Manage categories" captures playlist, provider and section before the PIN prompt and re-checks them after it and after the dialog import. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): keep the relock timeout behind the PIN and bind M3U group lock toggles to their playlist A locked session can no longer change the relock timeout: the Settings selector is disabled until the PIN is entered and the service refuses the change while locked. An M3U right-click lock toggle now captures its playlist before the PIN prompt and is saved only if that playlist is still open. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): reset a locked M3U channel however it becomes active The enforcement service now checks the active M3U channel whenever it changes while locked, so numeric zapping, next/previous and remote commands, which select from the full channel list, cannot start a channel of a locked group. Numeric zapping also skips such a channel. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): bind the M3U group management result to its playlist The groups view captures the playlist before the PIN prompt and drops the management dialog's hidden and locked group lists once another playlist is open, so they cannot be saved under that playlist. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs(parental-lock): record the accepted restart case of a failed rollback write Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): build bulk lock drafts only from a readable lock store The Xtream and M3U management dialogs offer lock toggles, and the Stalker lock dialog opens, only once the lock store has been read. A draft built from the empty fail-closed snapshot would otherwise replace the real locks with nothing on Save if storage recovered in between. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): keep the parental lock switch on the saved state and roll back to the recovered value The Settings switch snaps back to the saved state when clicked and follows it once the PIN action succeeds, so a cancelled or refused PIN no longer leaves it showing the opposite state. A failed switch write is undone to the value read after the settings retry instead of the hard-coded inverse. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): match noncanonical PWA Xtream category ids against their locks The PWA data source compared raw provider category ids such as "009" with locks stored as numbers, so such a category stayed visible while locked. Both sides are now compared in canonical numeric form. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): close the M3U group editor on any relock The group management dialog lists every group name, locked ones included, even when it opened without lock toggles (unreadable lock store). It now closes on any relock, and the groups view re-checks the lock state before opening it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: 4gray <fourgray@proton.me> Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
|
f0e51d2806 |
perf(web): keep lazy-only services and SafePipe out of main.js (#1729)
* perf(web): keep lazy-only services and SafePipe out of main.js The eager shell imported barrels that re-export Angular injectables and a pipe it never uses, and their static definitions keep those modules in main.js: PlaylistFileImportService came with PlaylistContextFacade, normalizeDateLocale with SafePipe, and the workspace-shell-util barrel with SettingsContextService, which #1714 grew with match counts. That growth put master 108 bytes over the renderer.initialBytes baseline #1712 had measured on a branch without #1714. Add file-level entries for the three modules and use them from the eager and settings code: renderer.initialBytes 1,626,127 -> 1,619,993 bytes. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * chore(performance): lower the initial-bytes baseline to 1,619,993 bytes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: 4gray <fourgray@proton.me> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5.5
|
6b1a321c9d |
ci(codeql): cancel superseded pull-request analyses (#1718)
PR CodeQL runs now share a per-PR concurrency group with cancel-in-progress; master pushes, the weekly schedule and manual dispatches get a unique group and are never cancelled. 69 superseded analyses ran to completion across 19 branches in the day before this change. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5.5
|
254d1fd922 |
chore(github): replace issue templates with issue forms (#1697)
* chore(github): replace issue templates with issue forms The Markdown bug and feature templates still asked "PWA or Electron/Tauri application" with 0.16.0 as the example version, and as free text they were mostly left unfilled: in the September backlog triage only about a third of bug reports named the version or the player, and 34 had to be sent back for a retest because they could not be tied to a fix. Replace them with GitHub issue forms that make the version, install method, OS, source type and selected player required fields, ask whether the problem is a regression, and point to Copy diagnostics. Add a dedicated form for playback problems, the largest class of reports, and a config that disables blank issues and links questions to Discussions, the Docker guide and the website. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * chore(github): address issue form review feedback - Playback form: add an "Audio player (radio station)" choice, qualify the Embedded MPV/VLC advice as desktop-only with a note on browser limits for the self-hosted web app, and fold the last working version into the description (12 inputs, the size immich ships). - Feature form: add the credentials and private URL reminder. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * chore(github): narrow the self-hosted CORS note in the playback form Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
4gray
|
b40f2c310f | feat(website): add task-based guides hub and seven article drafts | ||
|
4grayandClaude Opus 5.5
|
5dbad2383f |
perf(web): keep channel lists, EPG views and the Stalker layer off the initial path (#1712)
The root shell imported WindowControlsComponent and DialogService through the @iptvnator/ui/components barrel, and esbuild keeps every Angular component module a barrel re-exports, so channel lists, EPG views, @angular/forms, date-fns and the whole Stalker data layer sat in main.js. The shell now uses file-level entries, the Stalker connection editor is a lazy proxy, and the release-notes and external-player info dialogs load on demand with a handled failure path. renderer.initialBytes 2,714,336 -> 1,626,019 bytes (-40%); the baseline is lowered to the ubuntu ratchet measurement and the production/PWA initial budgets drop to 1.8/2 MB. J1: did-finish-load about -16 ms, first card within noise. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
4e29bded5b |
ci(e2e): skip Playwright browser installs in the Electron shards (#1708)
* ci(e2e): skip Playwright browser installs in the Electron shards The Electron suite drives Electron through Playwright's _electron API and never launches a Playwright browser or records video, so the per-shard `playwright install --with-deps` only downloaded unused browsers (about 3.5 minutes per Windows shard, nine shards per run). Linux shards now run a quick check that xvfb-run and Electron's shared libraries are present on the runner image instead. The web E2E job keeps its Chromium install. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * ci(e2e): fail the Linux Electron dependency check when ldd cannot run A missing Electron binary or a failing ldd left the "not found" grep empty, so the preflight passed and the launch failed later without a diagnostic. Check the binary first and report missing libraries before an ldd failure. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * ci(e2e): resolve the Electron binary before checking its libraries Electron 42+ downloads its binary on the first require('electron'), which used to happen inside Playwright's _electron.launch(). The Linux preflight ran before that and looked for node_modules/electron/dist/electron, which does not exist yet on a fresh runner. Resolve the binary through require('electron') so the download happens first and the check inspects the same path Playwright launches. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: 4gray <fourgray@proton.me> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
4gray
|
f166ff4d47 | ci(packaging): time-box the Snap and Flatpak embedded MPV runtime probes (#1704) | ||
|
4grayandClaude Opus 5.5
|
e8902f472a |
perf(ci): skip unit coverage on PRs that cannot reach it and persist the Jest cache (#1711)
Pull requests whose changes cannot reach any Tier A test (allowlist checked against declared Tier A inputs and an AST scan of cross-project reads) skip the unit coverage suite; master pushes always run it. Jest's transform cache is persisted with actions/cache: PRs restore only, master pushes start empty and save. Paired CI runs: Tier A 9m04s cold -> 6m09s warm. Nx Cloud is intentionally not used. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
34d393adc8 |
fix(coverage): report retried-then-passing e2e tests as flaky (#1706)
* fix(coverage): report retried-then-passing e2e tests as flaky The semantic summary flattened every Playwright attempt of a spec and checked for `failed` first, so a test that failed and then passed on a retry was reported as `failed` and its critical journey as `failing`, although Playwright counts it as flaky with zero unexpected results. The `flaky` branch was unreachable. Derive the status from the final attempt: only a failed or timed-out final attempt is `failed`; a pass after earlier failures is `flaky`. Skipped handling is unchanged. A journey with flaky tests is therefore `covered`; the Statuses line already lists the flaky count. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * fix(coverage): keep non-passing retries failed and surface flaky over skipped Review feedback on the final-attempt status: a failure followed by a skipped or interrupted retry returned the final status and dropped the failure, so the journey read as covered. Only a final pass now turns earlier failures into flaky; any other ending after a failure stays failed. A spec runs once per Playwright project, and `skipped` outranked `flaky`, so a skip in one browser hid a retried-then-passing test in another. Flaky now outranks skipped. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: 4gray <fourgray@proton.me> Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
|
ea51cae3db |
feat(settings): search settings from the header and the command palette (#1714)
* feat(settings): search settings from the header and the command palette The header search on the Settings page was shown but disabled. It now searches a shared index of all 56 settings rows by translated title, description and English synonyms, replaces the section page with ranked results, and opens a result by scrolling to, focusing and briefly highlighting its row. Enter opens the best match, and the section navigation shows per-section match counts. The command palette gains a "Settings" group that lists the best six matches for a non-empty query, so any setting is one Ctrl/Cmd+K away. Rows hidden by the current form state fall back to the control that reveals them; rows the runtime cannot render are never returned. The index ships through a new @iptvnator/workspace/shell/util/settings-search sub-entrypoint so it stays out of the eager bundle, and a registry spec keeps it in step with the section templates. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(settings): let search reveals win over pending input and gate embedded MPV rows - A reveal (result click, command palette, Enter) now cancels a search keystroke still waiting for its debounce, so its q navigation can no longer supersede the reveal and leave the results open. - Embedded MPV extra options and auto-reconnect require a lazily probed embedded MPV capability; frame copy also needs frameCopyAvailable, so search never offers a row the settings page cannot render. - Keyboard users keep a focus-visible ring on the revealed row after the highlight fades. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(workspace): wait for palette probes without Promise.allSettled The web tsconfig lib predates Promise.allSettled; use Promise.all over rejection-safe probes instead. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: 4gray <fourgray@proton.me> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5.5
|
b87291e388 |
ci(e2e): run the macOS Electron suite as two shards (#1707)
macOS runners are the scarcest on this account, so macOS now runs the Electron E2E suite as two Playwright shards instead of three; Ubuntu and Windows keep three. macOS shards get a 40-minute timeout. The summary job needed no change because it reads each shard's total from its report. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
4grayandClaude Fable 5.1
|
8ebb7e3424 |
perf(ci): run Tier A coverage concurrently with isolatedModules ts-jest (#1701)
Tier A coverage runs projects a few at a time (largest first, bounded Jest workers, buffered output, fail-fast kept) and ts-jest transpiles with isolatedModules instead of type-checking per process; five type re-exports become export type, two decorated inputs use import type. Unit Tests and Typechecks job: 26 min -> 9 min (Tier A step 23 min -> 6.5 min). Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
Kate Markson
|
e619a2be86 | fix(xtream): scroll to the selected category (#1663) | ||
|
4grayandClaude Fable 5.1
|
e39c854a41 |
perf(electron): load the main-process startup wiring after the window starts loading (#1702)
Registering IPC handlers costs 0.4 ms; evaluating the modules behind them (axios, drizzle-orm, better-sqlite3, electron-updater, fix-path) before the window could load was the real cost. main.ts now keeps only the pre-paint wiring and loads the rest as the deferred-events.js chunk inside the main window's did-start-loading listener, where the import and its registrations complete before any renderer invoke can arrive. Interleaved A/B on the performance build: app.whenReady 323 -> 265 ms, did-finish-load 499 -> 447 ms; J1 journey spawnToDidFinishLoad ~405 -> ~365 ms with identical counters. Packaging ships the chunk explicitly, verify:package-layout requires it, and the benchmark build identity hashes it. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
4grayandClaude Fable 5.1
|
497b6076fa |
ci(e2e): shard the Electron Playwright suite per OS (#1700)
Run the sequential Electron E2E suite as three Playwright shards per OS (one runner each) and summarize all shards of an OS in one follow-up job. The semantic summary script accepts a directory of shard reports, merges them and refuses to write when a shard is missing, duplicated or malformed, or when an explicit input does not exist. Slowest shard per OS in the final run: ubuntu 12.5 min (was 26), macOS 13.7 min (was 34), Windows 24.5 min (was 35). Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
4grayandClaude Fable 5.1
|
587e19541f |
perf(electron): compile the main-process bundle from a V8 code cache (#1696)
main.js is now a small entry that enables Node's on-disk V8 compile cache under userData/v8-compile-cache and then requires the application bundle main.app.js. Warm launches reach app.whenReady about 13 ms sooner at the median; IPTVNATOR_DISABLE_COMPILE_CACHE=1 turns it off and IPTVNATOR_COMPILE_CACHE_DIR relocates it. Packaging now ships main.app.js explicitly and verify:package-layout requires the main-process entry files in app.asar, because nx-electron copies the backend through an allowlist. The Xtream benchmark build identity hashes both the launcher and the bundle. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
|
0f1cad4b16 |
test(performance): add the J1 launch-to-usable journey benchmark (#1698)
* test(performance): add the J1 launch-to-usable journey benchmark Implements plan items A1, A3 (J1 only) and the minimal A4 from .plans/2026-09-25-performance-journeys-ratchet.md. - journey-renderer-probe.ts: init-script probe counting DOM mutations, layout shifts and long tasks until the first source card is visible on /workspace with the splash removed; unit-tested with jsdom fixtures. - journey-main-ipc-capture.ts: counts bridge invocations from the preload's renderer-API trace channel up to a sentinel call the probe fires, so the IPC counter is exact without touching production code. - launch.journey.ts + playwright.journeys.config.ts: seeded profile (one M3U source, one Xtream portal on the loopback mock), one warm-up and five measured iterations, fresh process and data directory each, writing dist/performance/journeys/<timestamp>/summary.json with exact counters and P50/P90 wall-clock. - Nx target electron-backend-e2e:journeys and root script perf:journeys. - docs/architecture/performance-journeys.md, README, context and validation map entries. renderer.cdTicksToFirstCard and main.sqlStatementsBeforeReadyToShow are reported as unavailable with the reason instead of being faked. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * test(performance): gate the renderer load so the probes never race startup Review follow-up for #1698. - journey-renderer-gate.cjs: a main-process hook loaded with `-r` (the mechanism Playwright uses for its own loader) makes the first loadFile/loadURL navigate to about:blank and holds the real load until the test releases it. Playwright reports no page before a navigation commits, so this is what lets the renderer probe be registered on the page before the real document exists; the IPC capture is installed before the release too. A safety timeout releases the gate on its own and marks the iteration invalid. Unit-tested with a fake BrowserWindow. - launch-journey-app.ts: registers the probe on the parked page, releases the gate, waits for the real document to commit, fails fast when the probe is missing, and refuses an iteration whose gate timed out, saw a second load, or released before the probe was in place. - journey-renderer-probe.ts: entries delivered live after the terminal batch are buffered and filtered by the same cutoff as queued ones, and the cutoff is sampled in a timer queued from the first rAF, i.e. after the card's frame is painted, so the render task's long task and layout shift are consistently included. - launch-journey-record.ts: layoutShiftScore rounded to three decimals; a 0.0001 shift flipped in and out of the cutoff between iterations. - playwright.journeys.config.ts: reuse a mock server left on the journeys port locally (its fixtures are deterministic); CI still starts its own. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * test(performance): validate the journey gate after the probe completes Codex follow-up on #1698: the gate state returned by release() cannot see a reload or recovery navigation that happens before the first card. Re-read the live state once the renderer probe has finished and validate that instead, so an iteration spanning an extra navigation is rejected. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * test(performance): fail an iteration whose performance observers were unavailable Codex follow-up on #1698: a renderer that cannot observe layout-shift or longtask entries used to pass the probe with zero counters, which a ratchet could not tell apart from a genuine zero. The probe assertion now rejects such an iteration and names the missing observer. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> --------- Co-authored-by: 4gray <fourgray@proton.me> Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
4gray
|
0e4e1d2169 | chore(release): begin 0.25 development and publish 0.24 article (#1674) | ||
|
4grayandClaude Fable 5.1
|
512e9787a8 |
perf(web): load Angular date locales lazily per language (#1695)
Plan thread C1, journey **J1 `launch`**, counter **`renderer.initialBytes`**. Stacked on #1694 → #1693 → #1692; merge in order. `apps/web/src/app/app-date-locales.ts` imported the locale data of all 18 supported languages eagerly, so every user shipped and parsed all of it at startup. Each locale is now a dynamic import keyed by the Angular locale id that `normalizeDateLocale()` derives from the app language (`by` → `be`, `ary` → `ar-MA`, `zhtw` → `zh-Hant`); English needs no data. Ordering is preserved so no template renders a locale whose data has not arrived (Angular throws in that case): - `main.ts` awaits the initial language's data (from `getInitialLanguage()`) before `bootstrapApplication`. - Both `TranslateService.use()` call sites, `AppComponent.initSettings()` and `SettingsFormFacade.applySavedSettings()`, register the data first through the new `AppDateLocaleService`. - A failed load never leaves the locale without data: English formatting is registered under the requested id (eager 1.1 KB `@angular/common/locales/en`), so `DatePipe` renders instead of throwing; the locale is not marked registered, so the next call retries and a success replaces the fallback (review follow-up). - `AppDateLocaleService.use()` orders switches by request, not by completion: a switch whose data arrives after a newer request is dropped, so the language chosen last wins (review follow-up). No kill switch: behavior is identical once the locale resolves, and the only new failure mode (a same-origin chunk failing to load) is shared with every lazy route. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
4grayandClaude Fable 5.1
|
d3b6e548cc |
ci(performance): fail when the web app's initial bytes grow (#1694)
Third step of the performance-journeys ratchet, stacked on #1693 (which is stacked on #1692; merge in order, GitHub retargets each to `master`). - New `Initial bytes ratchet` job in `.github/workflows/ci.yml` (ubuntu-latest): install, `pnpm nx build web --skip-nx-cache` (production configuration, the one users download), then `pnpm run perf:initial-bytes:check`. The job fails when `renderer.initialBytes` exceeds `tools/performance/journey-baselines.json`. - `dist/performance/` is uploaded as the `performance-journey-summary` artifact on every run, so a failing or tightenable run carries its evidence. - After review: the job first runs the new `tools/performance/check-baseline-direction.mjs`, which compares `journey-baselines.json` with the revision the change is measured against (the target branch of a pull request, `github.event.before` for a `master` push, `master` for a manual dispatch) and fails on any raised enforced limit (`value × toleranceRatio`), any widened or newly added tolerance, or any removed entry, so a PR cannot grow the payload and raise the baseline to match (lowered limits and new entries pass; a target branch without the file has nothing to weaken). Node tests cover it. - Docs: the performance-journeys contract and the validation map name the job, and the contract now states that this runner is the canonical measurer (take baseline values from its output, not from a local build). Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
4grayandClaude Fable 5.1
|
7abaad29e7 |
chore(performance): commit the initial-bytes baseline and ratchet checker (#1693)
Second step of the performance-journeys ratchet, stacked on #1692 (merge that first; this PR retargets to `master` automatically). - `tools/performance/journey-baselines.json`: J1 `launch` / `renderer.initialBytes` = **2,739,510 bytes**, the ubuntu runner's production build of `apps/web` at this content (after #1692 stopped bundling `package.json` into `main.js`). A local macOS build of this pre-#1695 code is 2 bytes smaller in `main.js` (the eager locale imports); once #1695 removes them the two are byte-identical. Correction to an earlier version of this description: the "556-byte macOS vs Linux difference" was almost entirely `package.json` text embedded in `main.js`, which moved with every script edit in this stack, plus this 2-byte residue. The runner is the canonical measurer; the CI run on the stacked #1694 branch (this content plus the job) is where the number is confirmed. - `tools/performance/check-journey-ratchet.mjs` compares a journey summary with the baselines: a counter above its value fails (exact, no slack), wall-clock entries fail above `value × toleranceRatio`, a baseline without a measurement fails so dropping a measurement cannot disable the ratchet, values below baseline print a "tighten" hint, and measured counters without a baseline are noted only. After review: checking nothing (empty file, or `--only` naming a missing entry) fails; a counter is read only from `counters` and a wall-clock entry only from `wallClock`; the repeatable `--only <journey>/<counter>` flag scopes a check. - Root scripts: `perf:initial-bytes:check` (measures into its own `dist/performance/initial-bytes.summary.json`, then checks `--only launch/renderer.initialBytes`) and `perf:ratchet:check` (full check); `perf:tools:test` runs both test files, as does `pnpm nx test performance-tools`. - `docs/architecture/performance-journeys.md` gains the Ratchet section (file format, rules, "baselines only move down"); the validation map lists the check. The CI job that runs the check on every PR is #1694; C1 (lazy Angular date locales, #1695) then lowers the baseline with the measured output as evidence. Note: `ci.yml` only triggers on pull requests targeting `master`, so this stacked PR shows no Actions runs until #1692 merges. The evidence runs above were dispatched with `gh workflow run ci.yml --ref <branch>`. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
4grayandClaude Fable 5.1
|
8bc877b625 |
chore(performance): measure initial bytes of the built web app (#1692)
First step of the performance-journeys ratchet (plan thread: J1 `launch`, counter `renderer.initialBytes`).
- `tools/performance/measure-initial-bytes.mjs` reads the built `dist/apps/web/index.html` and sums `index.html` plus every same-origin `<script src>`, `<link rel="stylesheet">` and `<link rel="modulepreload">` it references. Manifest, icons, external URLs and lazy chunks are not counted. A referenced file missing from the build fails the measurement instead of counting as zero bytes.
- `--json` prints the breakdown; `--summary <file>` writes the `journeys.<journey>.counters` shape a ratchet checker will consume (next PR).
- New Nx project `performance-tools` (test + lint targets), Tier B in `tools/coverage/coverage-policy.json`, root scripts `perf:initial-bytes` and `perf:tools:test`.
- New contract `docs/architecture/performance-journeys.md`, linked from the validation map, the agent context map and the README.
- **Review follow-ups:** resources are deduplicated by request URL (query kept, fragment dropped); `index.html` is parsed with parse5 (already a repository dependency, scripting enabled), so comments, bogus comments, raw-text bodies (script/style/noscript/title/textarea), inert `<template>` contents and character references in attributes all follow the HTML5 algorithm instead of a hand-written scanner; the review's edge cases stay as regression tests; docs show the `pnpm --silent` form for JSON output and explain how the counter relates to Angular's rounded "Initial total".
- **Found while measuring:** the environment files and the playback diagnostic panel imported the whole `package.json` (`import packageJson from '@package'`), which esbuild cannot tree-shake, so `main.js` carried the complete file and the counter moved with every script or dependency edit. They now import `{ version }` only (
|
||
|
4gray
|
3ed612ba65 |
fix(release): repair Snap uploads and retry published releases (#1691)
* fix(release): allow Snapcraft scratch extraction and retry public releases * test(release): detect local Snap permission test prerequisites |
||
|
4gray
|
0ecfc06494 |
test(electron): fix Windows cleanup and retain packaged smoke diagnostics (#1665)
* test(electron): reap Windows process trees and retain smoke diagnostics * test(electron): require confirmed process exit before relaunch * test(electron): retain process handle after application exit * test(electron): bind captured processes to application instancesv0.24.0 |
||
|
4gray
|
dc4b33991d |
chore(release): prepare v0.24.0 (#1659)
* chore(release): prepare v0.24.0 * docs(release): select sculptural v0.24 cover * docs(release): preserve announcement cover prompt |
||
|
4grayandClaude Opus 5
|
eb61d37dc3 |
docs(tmdb): replace catalog titles in matching examples with stand-ins (#1658)
* docs(tmdb): replace catalog titles in matching examples with stand-ins The Cyrillic and Arabic examples that document title folding were taken straight from a user's own portal catalog while the folding bugs were being diagnosed, and they spread from there into comments, fixtures, assertions and the architecture doc. A public repository is not the place for someone's viewing inventory, and the TMDB ids pinned alongside them identify the exact shows. Swap in stand-ins that reproduce the property under test rather than the title: a word whose "й" folds away, one whose "ё" does, a two-word title carrying a season marker, an Arabic phrase whose initial hamza decomposes into a separate word. Every replacement was run through the real `normalizeTitle` and `cleanTitleForSearch` before being written, so the folded keys, the wire queries and the cache lookup keys are the same shape as before — "Лейка" and "Леика" still meet on one key while staying two different searches, and "AR| أمثلة تجريبية" still keys as a hamza split into a space. Real TMDB ids become synthetic ones. One channel fixture that read as a film title becomes a plain channel name. Deliberately left alone: the leading-tag rule's "Akira | 1988" / "Момо | Momo" examples in `title-normalization.util.ts`. Those are not an inventory — they are the evidence for a regex decision measured over 1.27M catalog titles, and inventing replacements would document a measurement that never happened. No release note: comments, fixtures and docs only, with no behaviour change. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(tmdb): label the folding stand-ins as illustrative, not as history Review caught that the substitution left synthetic titles inside sentences that assert observed fact: the architecture doc claimed a particular folded query "returns zero results while `Лейка` returns the show" and named the stand-ins as the titles that were searched, missed and negatively cached, and several comments read the same way. The titles never existed, so the reading is wrong in the one direction that matters — a future reader debugging a regression would take them for production evidence. Keep the claim that is actually established, which is a class-level one: under the old single-form design every Cyrillic title carrying "й"/"ё" and every Arabic title carrying a hamza form was searched folded, missed, and cached as missing for the negative TTL. Present the strings themselves as illustrative stand-ins chosen to fold the same way. The verified invariant — what NFD does to those letters, and what the two tiers therefore produce — is unchanged and still assertable, because it is a property of the text rather than of any title. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(tmdb): finish the sweep — a missed cache key and a last observed-fact claim Two spots the first pass left behind: - `tmdb-search-cache-cleanup.spec.ts` kept a catalog-derived lookup key verbatim. Only the TMDB id beside it had been swapped, because the sweep matched the title in its display casing and the key stores it lowercased — so one item of the inventory stayed in the repository, twice. - `SearchTitleVariant`'s doc comment still asserted that one specific folded string finds nothing on TMDB. State the mechanism instead: folding rewrites the letters the search matches on, so the folded form finds nothing there. `content-search.util.sqlite.spec.ts` gets a channel fixture that no longer reads as a film title. `search-text-fold.util.spec.ts` is deliberately left alone. Its "Ёлки" is a common noun sitting in a Unicode corpus beside "Amélie", "İnşaat" and "Ά", not an inventory entry — and its rows are precomposed/decomposed PAIRS (U+0401 against U+0415 U+0308). A textual substitution rewrites only the composed half and silently turns the pair into two different words; doing it failed that spec, which is what a fixture encoding an invisible property is for. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(search): finish the fold fixtures by rewriting both halves of the pair The last two occurrences lived in the Unicode fold corpus, which an earlier attempt left alone after a textual substitution failed the spec. The reason it failed is the point: one row is a precomposed/decomposed PAIR — U+0401 against U+0415 U+0308 — asserting that both spellings fold to one string. Replacing the visible text rewrites only the composed half and silently turns the pair into two different words, which is not a thing a reader or a regex can see. Rewrite both halves by code point instead, keeping the decomposed half decomposed: U+0415 U+0308 + the new stem. Verified by decoding every quoted string in the file afterwards, and the spec passes (534/534). A repository-wide sweep now finds no occurrence of the replaced titles in either normalization form. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5
|
11358caa7a |
fix(embedded-mpv): unbreak the Windows runtime pin and the refresh that abandoned it (#1656)
The checked-in Windows Embedded MPV runtime pin pointed at an upstream release
whose 30-day retention had expired, so `Build on windows x64` failed
repository-wide the moment a runner's cache went cold:
Unable to download Windows embedded MPV runtime archive: 404 Not Found
The weekly refresh exists to rotate the pin well before that boundary, and it
had been red since 2026-09-07 — because its own validation step could only
pass while the pin was stale. `createPinFixture()` copied the CHECKED-IN pin
into the temp dir, and the age-threshold test then asserted, against a clock
frozen at 2026-09-05, that this pin was at least 14 days old. So every
successful rotation invalidated the assertion that guarded it: the step went
red, the bot pull request was never opened, and the pin was left to expire.
Build the refresh fixtures from the synthetic release fixture at an age the
test chooses (`createPinFixture({ ageDays })`) instead. The three refresh tests
are about the rule, so the rule is now what they exercise — one day under the
threshold is left alone, exactly at the threshold rotates, and the unavailable
case is deliberately young so only the 404 can explain it — and the outcome no
longer depends on production data that this job exists to replace.
`CURRENT_PIN` stays with the schema, naming and licence-statement checks, which
hold for any pin. A new case pins the invariant the job actually needs: a pin
written moments ago must read as current on the next run.
Rotate the pin to the newest upstream LGPL x86_64 release. Verified
end-to-end: the archive downloads (27 MB) and its SHA-256 matches the pinned
digest. The binary stays on its upstream host; IPTVnator does not mirror it and
the limited checksum/layout-only licence statement is preserved verbatim.
Also drops three catalog titles from a pending TMDB release note: notes are
published verbatim into CHANGELOG.md, the GitHub release body and the
announcement drafts, so the example now names the letter rather than the shows.
No release note: CI plumbing under `tools/`, outside the gate's `apps/`+`libs/`
trigger, with no user-visible behaviour change.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
4gray
|
faad8fd8fd |
docs(agents): compact root guidance and preserve task-specific knowledge (#1645)
* docs(agents): compact root guidance and preserve task-specific knowledge * fix(agents): parse guidance navigation with Markdown tokens * fix(agents): validate generic literal repository paths * fix(agents): distinguish code symbols and shortcut images * fix(agents): recognize SCSS filename literals * fix(agents): handle fenced imports and encoded paths * fix(agents): parse prose and rendered HTML anchors * fix(agents): validate rendered HTML navigation * fix(agents): use GitHub-compatible heading slugs * fix(agents): require standalone top-level Claude import * fix(agents): exclude HTML-contained guidance imports * fix(agents): handle image fragments and quoted imports * fix(agents): validate visible HTML and image source sets * fix(agents): recognize package scopes and route source work * fix(agents): parse JSONC and constrain package exemptions * fix(agents): decode link entities and allow package subpaths * fix(agents): route source work and check extensionless files * fix(agents): support package versions and source fragments * fix(agents): accept qualified package prose * fix(agents): retain rendered context for Markdown references * fix(agents): validate visible headings and spaced paths * fix(agents): validate media and hyphenated literal paths * fix(agents): decode full HTML entities and media assets * fix(agents): recognize possessive package mentions * fix(agents): validate extensionless imports and version comparators * fix(agents): retain visible backticks and explicit path punctuation * fix(agents): validate image-map navigation targets * fix(agents): count all Markdown line endings in budgets * fix(agents): delimit package prose at Unicode punctuation * fix(agents): normalize punctuation for extensionless imports * fix(agents): preserve filenames across prose punctuation * fix(agents): validate iframe document references * fix(agents): inspect document suffix before URL fragments * fix(agents): unify Markdown suffix and encoded import guards * fix(agents): handle wildcard versions and alternate documents * fix(agents): validate document formats and trim HTML URLs * fix(agents): cover document families and guidance basenames * fix(agents): require files for media references * fix(agents): preserve block boundaries and validate embeds * fix(agents): normalize internal HTML URL whitespace * fix(agents): reject empty media and ignore URL at-signs * fix(agents): validate srcdoc references and empty srcset * fix(agents): honor HTML bases and preserve adjacent imports * fix(agents): convert base file URLs to native paths * fix(agents): preserve imports after bare URL punctuation * fix(agents): exclude opaque URI prose from import scans * fix(agents): keep import tokens outside URI scheme matches * fix(agents): restrict opaque URI exemptions to parsed links * fix(agents): handle opening prose delimiters * fix(agents): scan nested imports and share document suffixes * fix(agents): reject pathless media and direct file URLs * fix(agents): reject file bases and preserve quoted URL boundaries * fix(agents): distinguish URL quotes and cover guidance variants * fix(agents): validate SVG images and conventional guides * fix(agents): handle declared package names handles and SVG use * fix(agents): normalize closing punctuation on federated handles * fix(agents): normalize Unicode punctuation on handles * fix(agents): normalize possessive federated handles * fix(agents): separate parenthetical prose from handles * fix(agents): exclude www autolinks from import scanning * ci: allow manual CodeQL validation of PR branches * fix(agents): reject nonportable Windows drive links |
||
|
4grayandClaude Opus 5
|
b02d79805b |
fix(tmdb): a new series no longer matches its older, better-known namesake (#1648)
Metadata is looked up in the app's own language, so an unrelated older foreign series can come back under exactly the same localized name as a recent local-language one. `pickConfidentMatch` admitted the older row through the series "premiered earlier" tolerance — portals report the running season's year while TMDB reports the premiere — and then let `pickMostPopular` decide across every admitted candidate, discarding the year evidence that had just admitted them. The better-known show won on votes, and the newer series rendered its poster, cast, genres and rating. Rank admitted candidates by year evidence first (`yearEvidenceTier`: the provider's exact year, then a year off by one, then the series tolerance) and let popularity break ties only inside the strongest tier any candidate reached. The tolerance stays — three of eight real lookups from one install depend on it — but it is a last resort, not an equal. Measured over 400 Cyrillic series titles sampled from a real catalog, 20 normalized keys had a same-titled older series and 16 of those were the more popular row. The mirror case is accepted knowingly: a long-running show whose stated season year happens to BE another same-titled show's premiere year now resolves to the newer show. Only the older show's season air dates could separate the two and a search response does not carry them, while that shape needs three coincidences at once against one that needs none. Search cache keys move to `|v4` with a matching startup cleanup, because a positive row naming the wrong show stays fresh for 30 days. Merged with `Build on windows x64` red: the checked-in Windows Embedded MPV runtime pin points at an upstream release whose retention expired, so that job fails repository-wide on a cold cache. Unrelated to this change; tracked separately. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
|
42b41ebabc |
fix(epg): advance the Xtream channel list's current programme as time passes (#1647)
The "current programme" under each Xtream Live TV row was written only on
scroll-into-view, on a new EPG result, or on an EPG offset change. Nothing
re-evaluated it as wall-clock time passed, so once a programme ended the row
stayed on it until the category was left and re-entered. The progress bar
under the row never moved either.
The rows on screen now re-check themselves once a minute. A programme still on
air only has its progress bar advanced, at no request cost; once it ends the
row is re-picked, and only a programme on air or upcoming may replace it, so a
guide that has run out can never walk the row backwards. An exhausted cache is
dropped and refetched at most once per cache lifetime per channel, while an
empty answer from the provider is left alone. What is on screen stays there
until a replacement arrives, so a refreshing row never blanks out.
A programme occupies [start, stop) in every comparison, the visible slice is
read from the viewport rather than remembered, and the two services behind
this are root-provided because a live layout mounts the channel list more than
once over a single EPG queue: EpgRefillLimiter is the floor on refetching an
exhausted guide, keyed by playlist since stream ids are provider-local, and
EpgRefreshCoordinator owns the one timer and merges every mounted list's
request, because the queue is latest-wins and separate timers would cancel
each other on exactly the boundaries that matter.
Contract: docs/architecture/m3u-playlist-module.md ("Xtream channel-row
programme refresh").
Fixes #767. Supersedes #1610.
Co-Authored-By: Justin Willhite <5132924+thejdubb02@users.noreply.github.com>
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
4gray
|
f80a21beef |
feat(collections): open a Stalker live favorite inside its portal (#1639)
Live channels in Favorites and Recently viewed now offer "Open in <playlist>" for Stalker portals, the counterpart of the VOD "View in portal" action. The chip in the programme panel and the channel's context menu jump to the channel inside its portal's Live TV, with its genre selected and the channel playing. Radio stays hidden: it is a separate legacy-paged section with no open-on-arrival contract. The handoff refuses to guess. The store records which genre the rendered ITV list belongs to, so the deferred play waits for a list that can actually serve the channel instead of inferring it from array identity. An id claimed by one channel as its `id` and another as its `stream_id` is ambiguous, so neither is played and the user still lands in the right genre. The handoff is abandoned when the user changes genre, search, portal or section first. Two pre-existing defects surfaced during review and are fixed here: - A blank provider id shadowed a valid one. `a ?? b` keeps an empty string, so a channel with a blank `stream_id` was stored with no identity at all and could not be selected, played or found again. Six writers had that shape and three private copies of the skip-the-blank rule; all now go through one `firstNonBlankStalkerId` helper. - Route-session readiness could publish before the store held the portal's row. The constructor starts one sync and the first navigation starts another, and the second skipped the bootstrap because the playlist id was claimed before the awaits that install it. Arrivals are now serialized, the id is claimed only after the store write resolves, and only the newest sync publishes readiness. Both fixes carry regression tests that fail on the old behavior. |
||
|
4gray
|
6578e4073c |
feat(dashboard): portal EPG on the live rails, loaded lazily per visible card (#1638)
Xtream and Stalker live cards on the dashboard carried no XMLTV key, so the rails never asked anything for them and showed only the LIVE chip. Their programme now comes from the portal, one card at a time and only once the card is on screen. - `lib-dashboard-rail` reports the cards inside its viewport through an IntersectionObserver rooted at the track; `DashboardLiveEpgPresenter` unions them with the pinned hero row and hands the set to `DashboardPortalLiveEpgPresenter`. - `DashboardPortalLiveEpgService` runs the bounded queue — two requests in flight, 200 ms apart, one card each — through `StreamResolverService.loadEpgForItems`, publishing every answer the moment it lands, so the page never waits and a slow portal delays no other card. A card scrolled past before its turn is never requested. - A programme is trusted for 60 s, an empty answer for 30 s (the resolver reports a dead portal and a guide-less channel identically), and a completion captures both the display offset and the EPG source revision, requeueing itself when either moved. - The presenter hands its wanted set back on destroy. Desktop only: the shared collection resolver is gated on the local XMLTV bridge. - A shimmer placeholder shows only before a card's first portal answer; M3U cards keep the batched XMLTV lookup. |