- serial-details-external-launch.ts: Electron publishes a `launching`
session as soon as the launch IPC arrives, not only after the launch
settles. Comment only; no behaviour change.
- stalker-portal.md: the search host's selection check does not include
the content type; a switch to a series supersedes the launch through
the playback owner key instead.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A launching session may already have its closer before the launch IPC
resolves, the Xtream movie launch gate does not cover the inline
player's diagnostic fallback, and the hero-state spec covers only the
external-player and reset rows.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- A launching session is published before the launch IPC resolves; what
it lacks until then is an exact closer.
- The series watched/reset batch and the Xtream movie launch gate are
page-wide, not owner-scoped.
- Only the Stalker movie hosts retire a pending start, and that does not
clear the repeat guard of a launch still in flight.
- Name only the specs that exercise the Xtream series rules.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The rules #1792 settled for forced external launches and playback-start
bookkeeping lived only in code comments and specs. Record them as
contracts in the owning documents:
- embedded-inline-playback.md: the shared detail-host rules (one external
player per title, unconfirmed teardown cancels, ownership rechecked
after every await, owner-scoped pending state).
- xtream-portal-compatibility.md: the series launch chain, page-token
duplicate guard and queued choice.
- vod-multi-source.md: the movie menu launch and reset follow the copy
the primary button acts on; pending resets are a list of targets.
- stalker-portal.md: the per-series launch queue, the batch-held choice
and the movie launch/reset pending start.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Load Roboto 600/700 and DM Sans 700 so Cyrillic and Greek headings render
real semibold and bold faces instead of a synthetic bold, keep
<html lang> in step with the UI language, and move every font weight onto
the 400/500/600/700 scale (JetBrains Mono at 500 or lighter; the dashboard
LIVE badge now uses the interface font at 700).
Add the `styles:font-weights:validate` ratchet guard and its CI step. It
reads stylesheets much as Sass and the browser do (cascade, layers,
mixins, content blocks, `@extend`, `@at-root`, `:is()`/`:where()`,
keyframes) and lists what it deliberately does not trace in its header.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every push to a pull-request branch starts the CI matrix and both review
bots, and runs from several open pull requests queue behind one another.
Move the fix rounds off GitHub: a branch is reviewed with the Codex and
Greptile CLIs until both are clean, then pushed once.
- AGENTS.md: the rule, linked to the procedure
- agent-workflow.md: commands, loop, stop conditions and exemptions
- agent-context-map.md: route the topic to the workflow document
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
* ci(i18n): fail on new English-identical translations
The drift check only warned about locale values identical to English, so
untranslated strings kept landing. It now fails on any such value that
tools/i18n/identical-en-baseline.json does not record for that locale and
key. The baseline captures today's 2,015 entries: legitimately identical
values (brand and technical names, language autonyms, PIN) and the
existing debt. An entry only covers the English text it recorded, so
copying reworded English into a locale fails too.
Baseline entries that are no longer identical are reported, not fatal.
`pnpm run i18n:baseline:update` rewrites the baseline deliberately; CI
runs `pnpm run i18n:validate` (node tests, then the check) and never
rewrites it. `--fail-on-identical` remains as a strict audit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(i18n): keep the baseline intact on failed updates and strict audits
`--update-baseline` now writes nothing while any locale is unreadable or
has missing or extra keys, so an incomplete translation cannot reshape
the baseline. `--fail-on-identical` no longer reads the baseline it
ignores, so a damaged file cannot block a strict audit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(import): consistent add-source forms with masked passwords and URL errors
- Mask the Xtream password in add and edit (and the Stalker one in edit)
behind a shared PasswordVisibilityToggleDirective: one translated
"Show password" label, state in aria-pressed, type="button".
- Give the Xtream server URL its own mat-error and a neutral hint instead
of the EPG file error; give the M3U URL a mat-error.
- Use "Playlist title" in every add form, "MAC address" casing, a single
ellipsis in "Validating portal…" and one "Add playlist" submit label;
translate the method radiogroup's aria-label.
- Show Stalker refusals inline under the portal URL (role="status", like
the Xtream connection test), translated in the template and cleared by
edits; translate the snackbars for outcomes that close the dialog.
- Translate new strings into all locales; reuse the identical Stalker URL
error translations; fix MAC casing and ellipses; drop unused keys.
- Unit specs per form, edit-dialog spec, new add-source-forms web E2E;
update E2E locators; UI guidelines Forms section; Stalker contract.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(import): mask the password again when an add form is cleared
Clear erased the password but left the visibility toggle on, so the next
password typed in the Xtream or Stalker form showed in plain text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
#1773 added `ambiguousTimelineCompletions` and `timeline` to
`JourneyMainIpcCaptureState`, while #1774 merged the J3 playback record
spec with a fixture of the old shape, so the spec no longer type-checks
(TS2739). The harness runs it through tsx without type checking, so CI
stayed green.
The timeline holds one start per counted call, matching `callsByMethod`
and `callsBeforeSentinel`, so the fixture stays a capture a real run
could produce.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* perf(electron): look up the login shell PATH without blocking the main thread
fix-path ran $SHELL -ilc env synchronously right after the first load.
With a typical zsh profile that held the main thread for 1-2 s, while the
database worker's ready message and the renderer's first IPC calls waited,
so the launch journey's first card came that much later. Use shell-path's
async shellPath() with fix-path's fallback, so the resulting PATH is the
same and the main thread stays free.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs(perf): name the PR that made the login shell PATH lookup async
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(electron): let bare-name player spawns wait for the login shell PATH
With the lookup now asynchronous, an external player launched (or the
Linux embedded MPV support check, which runs and caches a bare
`mpv --version`) within the first seconds could see the inherited PATH.
The OPEN_MPV_PLAYER / OPEN_VLC_PLAYER handlers and every embedded MPV
handler now await waitForLoginShellPath() (settled lookup, at most 10 s,
immediate on Windows), restoring the guarantee the blocking lookup gave.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(electron): wait for the login shell PATH only for bare-name spawns
External players wait only when they resolve to a bare name (no
configured path, no well-known install found); a path to an executable
starts at once. Embedded MPV waits only on Linux and only for support and
prepare, which run the cached bare-name `mpv --version` check; sessions
and controls never wait.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(electron): wait for the login shell PATH only before the mpv probe
Embedded MPV support and prepare waited on every Linux call, although
getSupport() returns before the bare-name `mpv --version` probe for the
frame-copy engine, native Wayland, a disabled feature or a cached result.
willProbeLinuxMpvExecutable() now gates the wait on the probe actually
running.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(electron): stop waiting for a login shell that already timed out once
After the first wait for a hung `$SHELL -ilc env` runs out, later
bare-name player launches and Linux mpv probes proceed at once instead
of each waiting the full limit again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(electron): bound login shell PATH waits by the lookup's own budget
Replace the latch on the first expired wait with a deadline set when the
lookup starts (10 s). Every wait ends when the lookup settles or the
deadline passes: a launch retried while the shell is still within its
budget waits for the PATH again, and once the budget is spent no launch
waits, so a hung shell still delays at most the first seconds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(electron): re-probe a missing mpv once a late login shell answers
When the PATH lookup runs out of budget, the Linux embedded MPV support
check probes `mpv --version` with the inherited PATH and caches a
missing result for the rest of the session. waitForLoginShellPath() now
reports whether the lookup settled; after a timed-out wait the handler
forgets a cached "missing" once the lookup finishes, so the next support
check probes again with the login shell PATH.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(electron): share one deadline among waits before the PATH lookup starts
A bare-name launch that waited before the lookup was scheduled started
its own 10 s limit, so while startup was stuck every retry paid the full
delay again. The first early wait now sets the shared deadline; the
lookup still replaces it with its own budget when it starts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(electron): re-probe mpv after a late login shell PATH either way
A Linux mpv probe that ran on the inherited PATH can be wrong in both
directions: the login shell PATH may add mpv or drop the directory the
inherited one found it in. forgetLinuxMpvExecutableProbe() now clears a
found result as well as a missing one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(electron): skip the login shell PATH wait for Flatpak host launches
In Flatpak, players start through `flatpak-spawn --host`, which resolves
the name with the host's PATH; the sandbox's login shell lookup cannot
change it. The launch handlers now decide from the same launch context
the player uses: no wait in flatpak-host mode, otherwise only for a bare
player name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: 4gray <fourgray@proton.me>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(dashboard): scroll a focused rail card fully into view
Chromium skips its focus scroll when 32px or more of the element already
shows, so Tab onto the last source card of a rail that overflows by less
than a card left it half-hidden under the edge fade. The rail track now
handles focusin and scrolls to the first card-start snap position that
reveals the whole card; a plain "nearest" scroll is not enough because
mandatory snapping can round it back (seen on the live channel rail).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(dashboard): keep mouse clicks on partly hidden rail cards
A mouse press focuses the card link on mousedown. Revealing the card at
that moment could slide it from under the pointer when the target snap
position overshoots (the live channel rail moves 316px for a 306px
card), so the click landed elsewhere. The rail now reveals a card only
for keyboard and programmatic focus, using the CDK FocusMonitor origin.
Adds an Electron E2E that checks the final layout after snapping: Tab and
focus() leave the last source card fully visible, and a mouse press keeps
the rail still and still opens the source.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(dashboard): tell pointer focus apart without touching the DOM
FocusMonitor toggles cdk-*-focused classes on the monitored track, so a
mouse press on a source card mutated the DOM before the click. The J2
"open a source" performance journey rejects iterations with DOM activity
between its settle snapshot and the click. Read the input modality from
the CDK InputModalityDetector in a focusin handler instead: it only
listens, so the rail stays untouched until the click.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(dashboard): reveal script-focused rail cards after a mouse click
The input modality stays "mouse" after any click, so a later focus() on
a partly hidden card left it clipped. The rail now skips the reveal only
for focus caused by a press inside the track: the focus has to arrive
within 100ms of that pointerdown (650ms for touch, whose focus comes
with the tap's compatibility mouse events, as in the CDK FocusMonitor).
Only event timestamps are compared, so the DOM still stays untouched
before the click.
The E2E now clicks elsewhere before the script focus, and unit tests
cover a tap and focus() after an earlier mouse press.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(dashboard): keep an over-wide focused rail card in view
In a window narrower than a card (or under zoom), a focused card could
never fit, so its own snap offset fell short of the needed scroll and
the rail jumped to the next card's snap point, moving the focused card
offscreen. Such a card is now aligned at its own start instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(dashboard): select rail internals through stable test ids
The dashboard contract makes data-test-id hooks the supported Electron
E2E selector surface. The rail now exposes -viewport, -track and
-card-link hooks next to its existing ones, and the focus E2E selects
those (and the rail heading by role) instead of internal class names.
The dashboard doc lists the new hooks and records the focus-reveal
contract.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: 4gray <fourgray@proton.me>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(ui): destructive confirmations, verb labels and provider icons
Confirmations: ConfirmDialogData.confirmLabel is required, so no dialog can
fall back to "Yes"/"No"; the dismiss defaults to "Cancel" and
`tone: 'destructive'` styles the confirm with .app-destructive-button. Every
caller names its action ("Remove playlist", "Clear", "Refresh playlist",
"Cancel download" with a "Close" dismiss). The confirm button has the
confirm-dialog-confirm test id and drops its no-op color="primary".
The no-op `warn` color input becomes .app-destructive-button on the EPG
mapping, playlist item, error view, EPG/reset settings, delete-all and source
cleanup buttons, and on the unsaved-changes dialog's Discard.
Provider icons come from SOURCE_TYPE_ICONS in shared/interfaces (Xtream
cloud, Stalker cast, M3U playlist_play / link / description / subject) in the
add dialog, auto-import, empty state, playlist switcher, playlist rows,
dashboard source rail, command palette, Sources filters and both reset
summaries. Stalker no longer borrows the Dashboard icon, and Xtream no longer
shares a glyph with M3U URL playlists.
The playlist error view removed a playlist through the stale
PlaylistActions.removePlaylist: it dropped the playlist from state before the
delete ran, swallowed failures, skipped the source activity guard and showed
no toast. It now uses PlaylistDeleteActionService like every other removal,
commits only a completed delete, toasts and goes home. The unused action and
its effect are removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(ui): one provider icon per playlist row, imperative Korean remove label
A restored Stalker or Xtream playlist can also carry a URL, and the row's
independent checks then showed the M3U URL icon next to the provider icon.
The row now switches on resolvePlaylistSourceIconKey(), the precedence every
other surface uses, so each source shows exactly one icon.
HOME.PLAYLISTS.REMOVE now names the confirm button and the row's delete
tooltip; in Korean it read "the playlist has been removed". It now says
"remove playlist", like every other locale.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(ui): keep the auto-refresh badge on playlist rows with one provider icon
Showing one provider icon per row moved the auto-refresh badge into the M3U
branches only, so a restored Stalker playlist with a URL and auto-refresh
lost it although the URL is still re-fetched. The row now renders one icon
container: the provider icon from the shared precedence, then the badge for
any row with a URL or a local M3U, exactly the rows that showed it before.
The Xtream portal-status dot, used without source health, keeps that corner.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(ui): let the playlist row's cancel action render in the error color
The row's action buttons set `color: inherit`, and the selected row does so
again with more specific selectors. Both beat Material's token-driven icon
color, so the .app-destructive-button cancel action kept the row color
(selection blue on the active row). Pin the cancel button to
--mat-sys-error in both row states.
The large-deletion Electron E2E now checks the cancel color in both themes;
without this rule it reads rgb(47, 123, 255) instead of the error red.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(ui): give the dialog service spec the now-required confirm labels
ConfirmDialogData.confirmLabel became required, and the spec still built
confirmations without one. Jest only transpiles, so the suite stayed green,
but the "Typecheck Jest spec programs" CI step rejected it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): count change-detection ticks in the electron-performance build
J1 renderer.cdTicksToFirstCard, J2 renderer.cdTicksToFirstPage and the
J1 idle baseline renderer.cdTicksIdle30s. Angular's ɵsetProfiler is only
reachable through the dev-mode window.ng global, so the electron-performance
configuration alone swaps environment.ts for environment.performance.ts,
which re-exports the production AppConfig and wraps ApplicationRef._tick.
Production and PWA sources and output are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): refuse a J1 idle window that opened late after the settle point
Addresses review: the idle window opens in the settle timer's callback while
the settle point is that timer's deadline, so a late callback left ticks
uncounted between the two.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: 4gray <fourgray@proton.me>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): measure the serial IPC depth before the J1 first card
Adds renderer.ipcSerialDepthToFirstCard to the launch journey: the length
of the longest chain of bridge calls in which each call started after the
previous one completed, among calls that completed before the first card.
The main IPC capture now records the ordered start/completion timeline;
the depth, its lower bound, the chain and the timeline are per-iteration
evidence, and the CI job summary prints the chain.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): keep the IPC timeline consistent around the J2 start marker
A call that started before the start marker no longer records its
completion in the timeline, and completions of a method with calls in
flight both inside and outside the timeline are attributed outside and
counted, instead of skipping the first marker-method completion.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: 4gray <fourgray@proton.me>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): add the J3 playback journey
J3 clicks a live channel of an Xtream portal and ends at the built-in
HTML5 player's first `playing` event, with `loadedmetadata` as a
secondary phase. It follows J2: every iteration is a fresh J1 launch on
a copy of a profile seeded through the app's dialogs, and the click
happens after the app has settled in the portal's first live category.
The portal is the mock's `live-fallback` account, whose `.ts` live URLs
serve the local H.264/AAC MPEG-TS fixture that mpegts.js plays through
MSE on every platform. The marketing accounts' local live bytes are
zero-filled and never reach `playing`. Seeding selects the HTML5 player
and the `ts` stream format; the catalog's picsum.photos logos are
cancelled from the test side so no request leaves the machine.
Counters: renderer.ipcCallsToPlaying, renderer.httpRequestsToPlaying,
renderer.domMutationsToPlaying, renderer.layoutShiftScore and
renderer.longTasks; wall-clock click->loadedmetadata and click->playing.
renderer.ipcSerialDepthToPlaying is listed as unavailable until the
serial-depth helper lands. No baseline yet.
The probe gains a media-event terminal; J2's pre-click settle moves to
journey-click-settle.ts so both journeys share it unchanged, and the
probe spec's jsdom fixtures move to a shared test helper.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): show J3's HTTP boundary margins and watch 1 s after playing
Review follow-up. renderer.httpRequestsToPlaying compares the ledger's
arrival stamps with the renderer's click and playing stamps, which come
from different processes on the same host clock. Each iteration now
records the distance of the nearest request on either side of both
boundaries, so a count a clock difference could flip is visible.
Requests after playing were a single snapshot taken right after the
probe; the test now watches the ledger for a fixed 1 s after playing.
A live stream never leaves the mock quiet, so J2's quiet wait does not
apply.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: 4gray <fourgray@proton.me>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(player): keyboard focus, contrast and ARIA for controls and settings
Dock and settings-panel icon buttons draw a 2px --pc-text ring on
:focus-visible, and Material's theme-coloured focus layer is off, so
keyboard focus shows on video in the light theme too. A focused selected
subtitle swatch now differs from one that is only selected.
Settings headings read --pc-text-secondary on denser glass
(--pc-glass-bg-dense, 0.86): 4.5:1 or more over mid-grey and white
frames. They wrap (overflow-wrap: anywhere, hyphens: auto), so long
German and Russian headings stay inside the sheet's heading column.
The settings panel is now radio groups only (SettingsRadioGroupDirective
over a CDK FocusKeyManager): one Tab stop per group on the checked option,
arrows, Home and End move focus without applying, and Space/Enter checks.
The dialog and its groups are named by real h2/h3/h4 headings, the
load-file action sits outside the subtitle radio group, the subtitle and
speed chips carry their value in their name ("Subtitles: English"), and
tune has aria-haspopup="dialog".
Adds a web E2E for the keyboard path in both themes with an axe check on
the open panel, and de/ru sheet heading wrapping; axe-core is a new dev
dependency for it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(player): arrows check settings radios; subtitle chip reads On
Review follow-up:
- Arrow keys, Home and End now check the settings radio they reach, as a
native radio group does (the directive clicks it, so the template's
handler applies the choice); an option the engine already reports as
checked is not applied again.
- With subtitles on but no track marked selected yet (the engine can
report the switch before the track list), the subtitle chip reads and
announces "On" (new SUBTITLES_ON key, 19 locales) instead of "Off".
- The swatch row has 4px padding on every side, so the outer focus ring
is not clipped at the scroll edge of the panel body.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(player): re-apply a settings radio while a switch is pending
The arrow-key check skipped any option the engine still reported as
checked. Arrowing from audio track A to B and back to A before the engine
confirmed B therefore sent no command for A, and playback ended on B with
focus on A. An arrow move always lands on an option other than the last
one applied, so it now applies unconditionally.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(e2e): let per-file E2E targets run without mock serve dependencies
Since #1710 the Playwright configs start the Stalker and Xtream mocks
themselves (`node --import tsx …`), so @nx/playwright can no longer map
those webServers to Nx tasks and infers the atomized `e2e-ci--*` targets
as non-parallel. The `e2e-ci--src/*.e2e.ts` target default still made
them depend on the continuous `stalker-mock-server:serve` and
`xtream-mock-server:serve` targets, and Nx refuses to run a
non-parallel task with continuous dependencies, so every per-file
target failed before running anything.
Drop the redundant mock dependencies and keep the Electron build.
The mock-launch guard spec now also rejects any nx.json target default
that depends on a mock-server task.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(e2e): scope the mock dependency guard to E2E targets
Check only the `e2e*` target defaults in nx.json, so an unrelated
default may still depend on a mock, and also check every target in the
`apps/*-e2e` project.json files, where a mock `serve` dependency would
break the same targets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(e2e): build Electron only before Electron per-file E2E targets
The `e2e-ci--src/*.e2e.ts` target default also matched web-e2e, so
every browser-only per-file target built electron-backend first. Split
it into project-filtered entries: Electron targets keep `build-e2e`,
web targets get an empty dependency list (which also keeps the
inferred `web:serve` dependency, rejected by Nx on a non-parallel
target, out of them).
The mock dependency guard now also catches `^serve`-style
dependencies, which schedule the mocks through the E2E projects'
implicit dependencies.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: 4gray <fourgray@proton.me>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(portals): treat an undetermined audio language as unknown
ICU 78, which Electron 43 and Node 26 ship, canonicalizes the ffprobe
marker `und` to the subtag `und` instead of an empty one. The source
metadata then recorded it as a stated language, so a switch between a
copy tagged `und` and one tagged English raised the "dub may differ"
warning. CI's older ICU hid this: the existing spec only fails on the
newer runtime.
Decline `und` explicitly, and cover `und-US` plus the dub comparison.
* test(portals): cover undetermined language across runtimes
---------
Co-authored-by: 4gray <serega05@gmail.com>
* fix(playback): show the Up next card near the real end of an episode
The card appeared a fixed 8 minutes before the end: most of a short
episode, and far into the story of a long one, with no way to hide it.
- Adaptive lead: 4% of the episode, clamped to 40 s … 3 min.
- A closing-credits chapter in the last third, when timeline segments
carry one, brings the card forward to its start (capped at 5 min).
- Close button and Escape dismiss the card for the current next episode.
- After 10 s (not while hovered) the card collapses into a one-line pill.
- Seconds countdown in the last minute.
- New playback setting "Up next card" (default on) turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(playback): address Up next card review feedback
- Offer the Up next card setting for Embedded MPV only under the
frame-copy engine; native view never mounts the shared controls.
- Hovering pauses the collapse delay instead of restarting it.
- Document that the card stays visible when the controls auto-hide.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(playback): restart the Up next collapse delay for a new episode
- A card that stays mounted while its next episode changes gives the new
item the full delay instead of the previous item's leftover.
- The setting description no longer promises credit-based timing: no
current series path supplies chapters yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(ui): keep dialog action rows on one line
Settings "Unsaved changes" dialog:
- Cancel / Discard / Save replace the phrase labels in all 19 locales, and
the dismiss now comes first; the shared CANCEL key replaces the unused
UNSAVED_DIALOG_STAY.
- At the 640px phone breakpoint the actions stack one per row, full width,
in DOM order.
EPG programme dialog:
- mat-dialog-title gives the dialog an accessible name.
- The footer Close is the only dismiss; it comes first and the primary
action last.
- The archive copy/download tools move under their notice, so the footer
stays on one row.
- Channel rows now open it through EpgProgrammeDialogService, which owns
the 540px config and a panel class scoping the surface overrides.
Adds a web-e2e layout spec (en, de, ru, fr, hu, ar on one row; de and ru
stacked on a phone), extends the Electron EPG spec to all three openers,
and documents the dialog contract in the UI guidelines.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(epg): stack programme dialog actions on phones
Below the 640px phone breakpoint the viewport caps the programme dialog,
and a long translated primary label ("Regarder depuis le début") no
longer fit beside Close. The footer had no wrap, and the dialog hides
overflow, so the label was clipped.
- At the phone breakpoint, the archive tools and the footer now stack one
full-width button per row, in DOM order.
- Buttons grow to fit their label, so a long label wraps inside its
button instead of being clipped.
- On desktop the footer can wrap again as a last resort.
The new Electron test opens a past programme in French at a 360px
viewport and measures both rows. It fails against the previous
stylesheet (the footer buttons are 44px narrower than the row).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* feat(playback): give the fullscreen side panel the settings panel's glass look
The fullscreen channel/episode panel was a full-height graphite strip while
the controls' settings panel is an inset, rounded glass card. The side panel
now wears the same surface: 16px inset (8px under 560px), 20px corners, the
controls' glass fill, hairline border, blur and shadow, the same open motion
and a 32px square close button. The edge hint uses the same glass, and the
episode list marks the playing row with the settings panel's selected cyan.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(playback): dismiss the side panel from the exposed edge gutter
The inset card leaves the hot zone's left strip visible beside it, above the
scrim, so a click there re-ran show() instead of dismissing. A completed
primary press in the zone now closes an open panel; hovering there still
counts as inside, since a hover-opened panel leaves the pointer resting in
that strip. The playing episode row also keeps its cyan tint on hover/focus.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(playback): decide an edge press from the panel state at pointerdown
A press held on the edge past the hover dwell opened the panel before the
release, which then read the open state and dismissed it. The press now
remembers whether it began on an open panel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* perf(dashboard): fill the hero rotation dot on the compositor
The active hero dot animated `width` 0 → 18px for every 8 s rotation, so
an idle dashboard with two or more slides ran style, layout and paint on
every frame. The fill is now a full-width bar that slides in with
`transform` under the pill's rounded clip. The `animationend` advance,
the pause and reduced-motion behaviour are unchanged.
Measured on the E2E build (visible, four slides, 120 s): layouts
10,405-10,677 -> 366-369, renderer process CPU 14.2-16.4 s -> 3.7-4.1 s,
GPU process CPU 14.8-18.8 s -> 14.0-14.8 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(e2e): drive the real hero rotation animation
The unit specs dispatch `animationend` on the dot span by hand, so a fill
whose real event no longer reached the handler would still pass. The new
Electron spec shortens `--hero-rotation-ms` and checks that the running
`::before` fill advances the slide, that pause holds it and that Play
resumes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: 4gray <fourgray@proton.me>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(i18n): translate parental lock strings in 16 locales
The parental lock feature (#1601) added 57 keys that only de and ru
translated; ar, ary, by, el, es, fr, hu, it, ja, ko, nl, pl, pt, tr, zh
and zhtw still showed the English text. Translate them using each
locale's existing terms for categories, groups, sources and settings,
and quote each locale's own "Manage categories" / "Manage groups"
labels in the how-to text.
nl WORKSPACE.DASHBOARD.HERO_DETAILS stays "Details": it is correct
Dutch and belongs to the dashboard hero, not the parental lock.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(i18n): use gender-neutral locked counts
LOCKED_COUNT and LOCKED_CATEGORIES_ROW count both categories and M3U
groups. The generic masculine plural in es, fr, it and pt read wrong for
(feminine) categories, so count the locks with a noun instead. el now
uses the feminine plural that fits both nouns.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: 4gray <fourgray@proton.me>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): add a settled layout-shift counter to the J1 launch journey
renderer.layoutShiftScore stops at the first-card cutoff, so the dashboard
shift fixed in #1738 (about 0.23, roughly 15 ms after the first card) read
as 0. renderer.layoutShiftScoreSettled sums the same non-input layout-shift
entries until the workspace content has been quiet for 500 ms, capped at
3 s after the cutoff. The first-card counter is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): attribute late layout shifts and record the first measurement
evidence.settle.lateShifts lists the counted shifts after the first-card
cutoff with the nodes the browser attributes them to. On master the settled
score is 0.236: the recent-sources rail moves up 316 px about 12 ms after
the first card and back down shortly after, a flicker #1738 did not cover.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): end the settle window at its scheduled deadline
A cap or quiet timer delayed by a busy main thread used the moment it ran
as the settle point, so shifts after the 3 s cap could enter the settled
counter. The settle point is now the deadline the timer was scheduled for.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs(perf): record the runner's settled layout-shift measurement
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: 4gray <fourgray@proton.me>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* chore(release): add 0.25 highlights and a settings search screenshot
Mark the deferred Electron startup wiring as the "Faster startup"
highlight next to settings search, and give the settings search note a
screenshot: a new `open-settings-search=<term>` capture action types the
term into the header search and waits for the ranked results.
Guard the manifest tooling with tests that validate the committed
screenshots.manifest.json and keep KNOWN_ACTIONS in step with the
capture navigation action tables.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* build(release): hash the capture action tables for release-tools:test
The KNOWN_ACTIONS parity test reads capture-navigation-*-actions.ts, so
those files must invalidate the cached test result.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* chore(release): trim 0.25 to three highlights
Keep redesigned player controls, parental lock and the cinematic
dashboard hero as the headline changes. Settings search, faster startup,
the player settings panel and the up next card stay as regular notes;
settings search keeps its screenshot.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: 4gray <fourgray@proton.me>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* perf(electron): let hidden and minimized windows report themselves hidden
The main window was created with backgroundThrottling: false (since #1123,
without a stated reason). Electron then keeps document.visibilityState at
"visible" for a hidden, minimized or fully covered window and never lets
Chromium throttle it, so every renderer timer, rAF and CSS transition ran at
full rate in the background, and the playback keep-awake gate, which
releases the display for a minimized window, could never see one.
Use Chromium's default. Audible media and picture-in-picture are exempt
from background throttling in Chromium, and a local check confirmed HLS
playback continues unchanged through more than six minutes minimized,
audible and muted.
Playwright's focus emulation pins every page it attaches to as visible, so
the new window-visibility E2E launches the app without Playwright and
drives it over raw CDP (electron-unautomated-launch.ts).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(e2e): harden the unautomated Electron launch
Review follow-ups for the window-visibility E2E:
- Resolve `electron` in the main process through a require created from
the `node:module` builtin instead of `process.mainModule`, which only
exists when the app entry is CommonJS.
- Bound teardown like closeElectronApplicationAndConfirmExit: SIGTERM,
then SIGKILL, 5 s each, then fail instead of waiting forever.
- Surface CDP protocol errors from Runtime.evaluate instead of returning
undefined.
- Wait until the window is actually shown before hiding it. The app shows
its window on ready-to-show, and a hide() that lands earlier is undone
by that show(); this was the first-attempt failure on the macOS shard.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(e2e): check the playback display lock is released while hidden
Review follow-ups for #1724:
- Add an E2E that plays the webm fixture in the unautomated launch,
records the main process's prevent-display-sleep blockers, and asserts
the keep-awake lock is taken while visible, released when the window is
hidden, and taken again when it is shown. The visibility tests alone
would still pass if the renderer gate or the bridge stopped updating
powerSaveBlocker.
- Validate CDP replies before dispatch (CodeQL
js/unvalidated-dynamic-method-call): only a numeric id with a pending
settle function is called.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(e2e): skip killing an Electron that already exited
stopElectron now checks the recorded exit state before each signal and
tolerates a kill that races the exit: on Windows taskkill throws for a PID
that no longer exists. Startup cleanup can no longer replace the startup
error that explains the failure; a cleanup failure there is logged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(stalker): keep the watchdog cadence while the window is hidden
With background throttling on, Chromium wakes a hidden, silent page's
timers at most once per minute after five minutes, so a portal that asks
for get_events every 30 s would see pings at half its cadence while the
window is minimized. Tick the watchdog from a dedicated worker
(createBackgroundInterval, an inline blob worker allowed by the renderer
CSP), whose timers are not subject to page throttling. It falls back to a
page setInterval where no worker is available or the worker fails to load.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(stalker): keep a stopped watchdog interval stopped
A worker error that arrived after stop() started the page fallback
interval, which nothing cleared, so pings continued for an inactive
playlist. stop() now marks the interval stopped, detaches the worker
handlers, and the fallback refuses to start afterwards.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: 4gray <fourgray@proton.me>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* perf(dashboard): slide live EPG progress fills with a compositor transform
The live-programme bars on channel rail cards and the hero animated their
width over 0.4 s whenever the 30 s live-EPG tick moved them. Width is a
layout property, so each tick re-laid out the whole document for about 24
frames, also while the window was minimized. Slide a full-width fill with
translateX driven by a --live-progress custom property instead; Chromium
runs that transition on the compositor. Reduced motion drops it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(dashboard): format the live progress spec
* perf(dashboard): stop animating the live EPG progress fills
A live-EPG tick moves the bar by under one percent, so the 0.4 s transform
transition was invisible but still produced a burst of compositor frames
on every tick. Place the fill without a transition.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(dashboard): pin the hero progress fill to its custom property
The hero moved into DashboardHeroComponent (#1738); its progress bar gets
the same transform fill as the rail cards.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: 4gray <fourgray@proton.me>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* docs(coverage): record why two-core Tier A runs stay serial
Answers two review notes on the concurrent Tier A runner with measurements
instead of code changes:
- Two cores stay serial. Two in flight would give each project one Jest
worker, which runs Jest in-band; on a 2-core / 7 GB container ui-playback
and web ran out of their 2 GiB default heap. With a 4 GiB heap it passed
about 15% faster on a warm cache for 1.2 GiB more peak memory. CI runs on
4 cores. A test pins that the defaults never drop to one worker.
- Per-project output buffering is bounded in practice: a big project with
every test failing printed 1.8 MB while its Jest process peaked at 850 MB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs(coverage): say two-core runs keep two workers per project
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: 4gray <fourgray@proton.me>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): add the J2 open-source journey
Measure the click on the Xtream portal card until the category list and
the first page of the opened section are painted, in the same fresh
process as J1 after its counters are final and the app has settled.
- journey-renderer-probe: optional click start (capture-phase listener on
window, start sentinel before the app sees the click, entries before the
click dropped), companion selectors, recent-input layout shifts tallied
- journey-main-ipc-capture: optional start sentinel; counts calls between
the two sentinels
- journey-mock-request-ledger: loopback proxy that counts every request
the app sends to the mock without storing credentials
- open-source-journey-record: J2 counters and evidence
- journey-run / journey-summary: every journey spec of one perf:journeys
run adds its entry to the same summary.json
- docs: J2 contract in performance-journeys.md
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): stop echoing the request URL from the ledger spec's upstream
CodeQL flagged the fake upstream as reflected XSS. It now records what it
received server-side and answers with a fixed text/plain body.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): address J2 review findings
- Sentinels use cancelSourceProbe: the preload traces the call before
forwarding it and SOURCE_HEALTH_CANCEL is an in-memory map lookup, so a
marker no longer runs a SQLite query on the worker ahead of the measured
work (Codex P1). A spec pins that handler contract.
- A run is started only in the Playwright runner, replacing inherited
values, and carries a random harness.runId; summaries from another
invocation are never merged (Greptile P1, Codex P2).
- The mock ledger tracks in-flight requests; settling and the HTTP window
require none in flight (Codex P2).
- clickToFirstPagePaintMs reports click to the committed paint next to
the terminal-batch clickToFirstPageMs (Codex P1).
- The Playwright attachment carries the whole summary (Greptile P2).
- jsdom probe specs wait for the post-paint cutoff instead of a fixed
40 ms, which flaked when the harness runs all files in parallel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs(validation): describe perf:journeys as running J1 and J2
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): settle J2 on pending bridge calls and start HTTP at the click
- The journey IPC capture pairs every traced start with its success or
error and exposes the calls still in flight. J2 settles only when J1's
capture, installed before the document loaded, has none pending, so a
slow startup call cannot resolve after the click and count as J2.
- The mock HTTP window starts at the renderer's click stamp instead of
the test-side mark taken before Playwright's actionability checks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): restart the J2 quiet period when pending work completes
Both waits in the open-source journey (settling before the click, closing
the mock window after the terminal) now use one waitForJourneyQuiet
helper that compares whole samples, in-flight counts included. The poll
that first sees a request or bridge call complete restarts the quiet
period, so the window is never measured from a poll at which work was
still pending. A fake-clock spec covers the in-flight to zero case.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): align J2 with the main-process counters from #1715
After rebasing on #1715, J1 measures main.sqlStatementsBeforeReadyToShow,
so J2's reason for listing main.sqlStatementsToFirstPage as unavailable
(no countable channel) was stale. State the actual limit: the running
total is read from the test process and cannot be bounded at the click
or the first-page batch. The performance-journeys CI job comment now
names both journeys.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): launch J2 without SQL counting and stamp mock requests in sub-ms
- runLaunchJourney takes the launch instrumentation; only J1 turns on the
main-process counters and IPTVNATOR_PERF_COUNT_SQL, so J2's click is not
measured under the hook that wraps every SQLite statement. The flags are
built in journey-launch-environment.ts, which the SQL opt-in guard now
expects, and a launch record without main counters is rejected.
- The mock ledger stamps arrivals with performance.timeOrigin +
performance.now(), the same sub-millisecond epoch as the renderer's
click, so a request later in the click's millisecond is not counted
before it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): reject J2 iterations with activity after settling
- The open-source record compares the settle snapshot with what the probe
and the IPC capture counted up to the click event, and with the mock
requests between the snapshot and the click stamp. Any change means
background work began during Playwright's actionability checks and
could land in J2, so the iteration is rejected.
- The SQL opt-in guard also checks who passes mainCounters: true: only
measureLaunchJourney may, and J2 must pass false.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): count the long task that dispatches the J2 click
A long task's startTime precedes the click event's timestamp when the
listener runs inside it, so the start-time filter dropped the task that
performs the interaction. Long tasks now count when their range overlaps
the window: on one main thread only the dispatching task can overlap the
click. Layout shifts keep the start-time filter. J1 is unchanged (its
window starts at -Infinity).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): bound J2's late-request check by the quiet sample's mark
The late-activity check compared requests against a fresh ledger mark
taken after waitForQuiet returned. A request that arrived while the final
quiet sample was still reading the IPC capture advanced that mark and
escaped the check. The boundary is now the ledger position read by the
accepted sample itself, like its DOM and IPC counts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): end J2's HTTP window at the accepted quiet sample
The post-terminal window read the ledger after waitForMockQuiet returned,
so a request arriving in between was counted although its completion was
never waited for. waitForMockQuiet now returns the ledger position its
accepted sample read; later requests are kept as evidence
(httpRequestsAfterSettledByRoute) instead of the counter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): observe late mock requests before reading J2's ledger
httpRequestsAfterSettledByRoute read the ledger right after the accepted
quiet sample, so late requests had no chance to appear in it. The ledger
is now read after another quiet interval; the counter stays bounded by
the quiet sample's mark and late traffic shows up in the evidence.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): fail the J2 quiet wait when a sample stalls past its deadline
waitForJourneyQuiet accepted a sample that returned unchanged after a
stall longer than the timeout as the end of a quiet period, before the
deadline check ran. The deadline is now checked first, so a stalled
sample fails the wait instead of letting the click go ahead unobserved.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): detach J1's IPC capture before the J2 click
J2 used J1's capture to see pending launch bridge calls while settling,
but its ipcMain listener stayed attached and ran for every bridge call of
the measured click. The capture can now be detached; J2 detaches J1's
right after settling, before the click.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(perf): sample both J2 settle captures in one main-process snapshot
The settle sample read J1's capture (pending calls) and J2's capture
(call count) in two evaluate calls, so a call starting in between was
counted with a stale zero in flight and its completion went unseen. Both
states are now read in one synchronous pass, where no ipcMain event can
be handled in between.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: 4gray <fourgray@proton.me>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* test(e2e): explain black canvases in the packaged frame-copy smoke
When the smoke's canvas stays black, print and attach the session
snapshot (with mpv's drop counter), every slot of the helper's
shared-memory frame rings read from /dev/shm, and the session's verbose
mpv log (log-file). Together they separate these cases: the helper never
published a frame, mpv rendered black, or the preload pump did not draw
a real frame.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(playback): stop random black frames on software GL in frame-copy
mpv's LUT scalers (the default lanczos/spline family) build their weight
texture from an uninitialized talloc_array: mp_compute_lut fills only
kernel->size of every stride floats, so each row's padding is heap
garbage (reinit_scaler in video/out/gpu/video.c, mpv 0.41 and master).
The LUT is an rgba16f texture sampled with linear filtering. When the
padding holds NaN, or a value large enough to become Inf as half-float,
Mesa's llvmpipe carries it through the zero-weight neighbour texel, the
weights become NaN and the frame clamps to pure black. Whether it happens
depends on heap contents, so the packaged smoke's paused frame was black
in most attempts on the CI runner.
Evidence from CI (8 repeats each, no retries): baseline 2/8 passed;
LUT-free bilinear scalers 8/8; gpu-dumb-mode 8/8; LP_NUM_THREADS=1 6/8.
A synchronous glReadPixels right after mpv_render_context_render()
showed the black frame already in the helper's FBO. The readback, the
shared-memory ring and the preload pump were correct.
On a CPU rasterizer the helper now selects mpv's LUT-free bilinear
scalers and disables sigmoid upscaling. Software GL cannot afford the
LUT scalers anyway. A session option for the same key still wins.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(playback): report software scaler results and scope smoke ring diagnostics
The software-renderer fallback now reports which scaler options mpv
accepted and which it rejected (with mpv's error), instead of always
printing success. The smoke's black-canvas diagnostics read only the
failed session's rings (<sessionId>-g<N>), not every impv-fc ring in
/dev/shm.
Addresses Greptile review feedback.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: 4gray <fourgray@proton.me>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
