Audit followup to the support-loop and volume-restart fixes. Two more
effects pulled in transitive signal deps that would have caused the same
class of regression the next time the surrounding helpers grew.
1. Component session-fan-out effect: the body called
scheduleControlsHide(), which reads isPlaying/menus.anyOpen/statusLabel/
controlsVisible. Those became tracked deps of the effect, so opening a
popover, pausing, or hovering re-ran the whole body — re-emitting
timeUpdate. If a parent ever wires timeUpdate back into
playback.startTime as a "resume where I left off" feature, this would
have been the next stream-restart bug. Wrap the side-effect block in
untracked() so the effect only listens to session changes.
2. Controller stalled-tracker effect: tracked the full session signal
even though only status was needed. The session payload updates ~2 Hz
during playback (positionSeconds advances), making the effect re-run
constantly to call a no-op. Add a sessionStatus computed and track
that instead — fires only on real status transitions.
No behavior change for current users; both fixes are preventative.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: f957cd9849e0
Same root cause as the loading-loop fix: the session-creation effect
read this.volume() while building startSession's initialVolume argument,
which made volume a tracked dependency of the effect. Each volume tick
re-ran the effect, the cleanup disposed the active session, and a fresh
one was created — which for VOD/series meant restarting playback from
the beginning.
Read volume via untracked() inside the effect. The value is only needed
once at session creation; subsequent volume changes flow through
controller.applyVolume() and never go near the effect.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: f957cd9849e0
Regression introduced in the bundle 3 refactor. After calling
prepareEmbeddedMpv, the controller wrote the response back into
this.support — but the component's session-creation effect tracks
this.support(), so updating it cleaned up the just-created session and
ran startSession again, which prepared again, set support again, and so
on. Net effect: endless "Loading stream…" spinner because every session
was disposed before MPV could finish loading the file.
The initial loadSupport() in the constructor already populates support
(including capabilities). Drop the redundant set in startSession; leave
a comment explaining why so it does not get re-added.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: f957cd9849e0
The timeline and volume sliders were rendering invisibly because:
- --embedded-mpv-accent resolved to var(--mat-sys-primary) with no
fallback. If the Material 3 theme tokens did not cascade into the
component scope, the variable was empty and both the thumb and the
Firefox progress fill rendered with no color.
- The track contrast was 22% of var(--mat-sys-on-surface) which has the
same scoping fragility on top of being subtle even when it does
resolve.
- The thumb had no border, so even when accent was present it could
blend into similarly-toned popover backgrounds.
- The played portion of the timeline had no fill in Chromium because
::-webkit-slider-runnable-track does not support a native progress
state.
Fixes:
- Add hard fallbacks on every theme-token reference (accent falls back to
#7dd3fc, surface to #0f1620, outline-variant to a translucent white).
- Add --embedded-mpv-track and --embedded-mpv-thumb-ring as theme-
independent CSS variables so the slider stays legible regardless of
the parent theme provider.
- Give the thumb a 2 px white ring border + a stronger drop shadow so it
reads on any background (panel glass, dark backdrop, accent-coloured
area).
- Implement played-progress fill via a linear-gradient on
::-webkit-slider-runnable-track keyed off a CSS variable
--slider-progress, set per-slider from the template based on the
current playback position / volume. Firefox uses native
::-moz-range-progress.
- Tidy disabled state styling so live-stream timelines (no duration)
are dim but still visible.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: f957cd9849e0
The renderer was reading session.id and forwarding it to the addon, but
during the loading window that id is the placeholder
"embedded-mpv-starting" set by createLoadingSession. If the user adjusted
volume, seeked, or toggled audio/subtitle/speed/aspect before the addon's
createSession returned the real id, that placeholder id reached the
addon — and the addon's getSessionOrThrow threw a raw std::runtime_error
which libc++abi terminated the process on.
Two fixes, defense in depth:
1. Renderer (session controller): use the canonical sessionId() signal,
which is null until the addon hands back a real id, as the gate for all
IPC calls. Wrap every IPC call in a guardIpc helper that swallows
addon-side throws so a torn-down session or race won't surface as an
uncaught promise rejection.
2. Native (embedded_mpv.mm): change getSessionOrThrow to take a
Napi::Env and throw Napi::Error::New(env, ...) instead of
std::runtime_error. node-addon-api converts Napi::Error to a JS
exception cleanly; the previous std::runtime_error escaped the C++
frame and aborted the process when the addon was built without
NAPI_CPP_EXCEPTIONS translation. Refactor splits findSession (returns
nullptr) from getSessionOrThrow (env-aware) so call paths that just
probe a session's existence don't pay the throw cost.
The native fix needs an addon rebuild to take effect; the renderer fix
prevents the crash trigger immediately.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: f957cd9849e0
Same root cause as the modal-dialog occlusion: control popovers (volume,
audio, subtitle, speed, aspect) extend upward from the controls strip into
the area covered by the MPV NSView. They render in DOM but the native view
paints over them.
Replace the simple boolean overlayActiveProvider with a richer
boundsProvider closure on the session controller. The component drives it
from both the modal overlay state and the popover menu state:
- Modal dialog open (command palette, MatDialog) -> HIDDEN_BOUNDS, MPV
fully off-screen so the dialog has the whole window.
- Popover menu open -> shrink MPV from the bottom by 300 px so the popover
region lives in DOM-receiving space; video keeps playing in the upper
region instead of disappearing entirely.
- Otherwise -> full host bounds.
Bounds-resync effect now tracks menus.anyOpen() in addition to
overlayActive() so opening or closing a popover triggers an immediate
re-sync.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: f957cd9849e0
The component had grown to ~1000 lines with session lifecycle, IPC plumbing,
keyboard shortcuts, popover state, formatters, and view orchestration all
living in one file. Per CLAUDE.md's 350–400 line hard cap, split into:
- embedded-mpv-format.utils.ts (~100): pure helpers (formatTime, track
labels, volume icon/label, persisted-volume access, measureBounds) and
preset constants (SPEED_PRESETS, ASPECT_PRESETS, HIDDEN_BOUNDS).
- embedded-mpv-shortcuts.ts (~90): EmbeddedMpvShortcuts class that owns the
document keydown listener and routes through a handler interface; the
component just provides callbacks.
- embedded-mpv-ui-state.ts (~110): EmbeddedMpvMenuState (single-open
popover state machine with toggle/open/close/closeAll + anyOpen signal)
and EmbeddedMpvFeedback (transient overlay with auto-clearing flash).
- embedded-mpv-session-controller.ts (~395): component-scoped Injectable
that owns support/session/sessionId/stalled/retryToken signals, the
session-update IPC subscription, bounds-sync (resize, scroll, overlay
state), the stalled timer, and all per-session IPC operations
(togglePaused, seekBy, seekTo, applyVolume, setAudioTrack,
setSubtitleTrack, setSpeed, setAspect, retry).
- embedded-mpv-player.component.ts (now ~540, was ~1000): view-only
orchestration — view children, derived computed signals, DOM event
listeners (pointerdown/pointermove/fullscreenchange/dblclick), and three
effects (session start/teardown, overlay-active bounds sync, session
payload → volume/timeUpdate fan-out).
No behavior changes. Build clean, electron-backend tests still pass.
Component is still over the 400-line cap but the bulk of its size is now
the necessarily-coupled-to-view computed signals and constructor effects;
the remaining over-cap delta is structural to a player root.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: f957cd9849e0
Native addon (apps/electron-backend/native/src/embedded_mpv.mm)
- Extend SessionSnapshot with subtitleTracks, selectedSubtitleTrackId,
playbackSpeed, aspectOverride.
- Refactor track parsing into a shared updateTracksFromNode helper that
filters by mpv "type" so audio and subtitle tracks share the code path.
- Observe sid, speed, video-aspect-override; clear sub state on
MPV_EVENT_START_FILE.
- Export setSubtitleTrack (handles trackId === -1 as "no" to disable),
setSpeed (clamped to 0.25–4.0), setAspect (passthrough string for
video-aspect-override).
- Snapshot output now includes the new fields.
Service (embedded-mpv-native.service.ts) + IPC + preload
- Mirror methods on EmbeddedMpvNativeService with capability detection: each
method throws a descriptive error if the loaded addon doesn't expose the
underlying native function (i.e. user is running an older build).
- New IPC channels EMBEDDED_MPV_SET_SUBTITLE_TRACK, _SET_SPEED, _SET_ASPECT
registered in events file and exposed via preload.
- Extend EmbeddedMpvSupport with a capabilities probe so the renderer can
hide controls for features the current addon build doesn't ship.
Renderer (embedded-mpv-player.component.{ts,html})
- Three new popovers anchored above their buttons (subtitle / speed /
aspect), gated by capabilities() and (for subtitles) by track count.
- Subtitle popover includes an Off entry; speed/aspect use fixed presets.
- Error state now surfaces the same overlay as the stalled state, with a
Retry button that bumps the existing retryNonce signal — covers #8 from
the audit.
- All session-payload defaults (loading stub, error stub, refresh fallback,
dispose payload, native createSession default) updated for the new
required fields.
NOTE: Existing addon binaries do not expose the new methods. Until the
addon is rebuilt (pnpm run serve:backend:embedded-mpv or the release
build script), capabilities will report subtitles/playbackSpeed/
aspectOverride as false and the new buttons will simply not appear.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: f957cd9849e0
- Volume button now toggles mute on click; the slider opens via hover/focus
in an absolute popover anchored above the button (with hover-bridge so the
cursor can reach it without crossing a dead zone). Wheel over the volume
area adjusts volume.
- Audio track menu likewise becomes a click-toggle popover anchored to its
button instead of a panel takeover; the back-arrow / mode-panel
scaffolding is gone.
- Slider gets explicit thumb/track styling for both WebKit and Firefox so
it reads as part of the design system instead of a raw native control;
aria-valuetext on the timeline announces formatted time.
- Stalled overlay: if status remains "loading" for 30 s, surface a centered
warning with a Retry button that disposes the session and recreates it
via a retryNonce signal the playback effect tracks.
- Keypress feedback overlay: ←/→ seek, ↑/↓ volume, M mute now flash a
centered pill with the icon + delta so the action is visible (especially
important in fullscreen where the controls are hidden).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: f957cd9849e0
Add the standard set of player shortcuts to match the audio/HTML video
players already in the app:
- Space, K — play/pause
- F — toggle fullscreen
- Left/Right — seek -5 s / +5 s
- Up/Down — volume +/- 5 %
- M — toggle mute (restores prior volume)
Shortcuts are ignored while focus is in an input/select/textarea or while
any MatDialog (e.g. command palette) is open, so the palette's filter and
dialog inputs keep their keys. Volume changes route through a shared
applyVolume helper so keyboard/wheel/slider all persist to localStorage
and the active session.
Also bind dblclick on the player root to toggle fullscreen, with a guard
so double-clicks on buttons/sliders don't trigger it. Note: the native
MPV NSView intercepts mouse events over the video itself, so dblclick
only fires on DOM-receiving regions (currently the controls strip).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: f957cd9849e0
The command palette is a MatDialog with a transparent backdrop, and the
prior MutationObserver-only detector did not reliably catch it across
overlay-container instantiation timing — the player kept rendering at full
bounds while the palette was open and continued occluding it. Subscribe
directly to MatDialog.afterOpened / afterAllClosed for the authoritative
"any modal dialog open" signal, and keep the OverlayContainer mutation
observer as a fallback for non-dialog CDK overlays. Either signal flips
overlayActive, hiding the embedded MPV view as before.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: f957cd9849e0
The native MPV NSView sits above the WebContents and is sized to the
viewport rect, so any DOM region it covers never receives pointer events.
Bundle 1 made the viewport fill the whole player, leaving no DOM strip to
catch pointermove — once the controls faded out there was no way to bring
them back via hover. Reapply the bottom inset on the viewport, scoped to
the slimmer 64 px panel, so the bottom strip is DOM-only and hover wakes
the controls. Swap the gradient for the glass surface treatment now that
the panel no longer needs to fade into video.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: f957cd9849e0
- Switch palette and surfaces to Material 3 tokens (--mat-sys-*) so the
player respects the app theme instead of a hardcoded cyan/sky scheme.
- Stop reserving 96 px below the viewport for the control panel; the panel
now floats over the bottom with a gradient fade so the video fills the
frame (especially in fullscreen).
- Drop control panel height from 96 to 64 px (88 px on narrow widths).
- Replace the corner "Loading stream in MPV..." pill with a centered
spinner + concise label during load; move the transient status toast
to the top-right and add role="status" aria-live.
- Add a red badge with pulsing dot for live streams in place of the plain
"LIVE" text label.
- Apply font-variant-numeric: tabular-nums to time/volume readouts so
digits stop jittering as playback advances.
- Slightly loosen transport/actions gaps for a less cramped rhythm and
use ease-out easing on control fade.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: f957cd9849e0
The embedded MPV player is a native NSView that sits above the WebContents
layer, so DOM dialogs (command palette, MatDialog, etc.) always paint behind
it regardless of z-index. Track CDK overlay backdrops via OverlayContainer +
MutationObserver and send off-screen bounds to the native view while any
backdrop is present, restoring real bounds on close. Playback continues
uninterrupted.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: f957cd9849e0
The loading placeholders for live channel rows were inconsistent and
visibly heavier than the real channel-list-item: each module rendered
its own skeleton with a colored card surface, larger padding/radius,
mismatched logo border-radius, and only a single tiny right-side dot
instead of the real 34×34 action buttons. Stalker had no initial-load
skeleton at all.
Extract a shared app-channel-list-item-skeleton that mirrors
channel-list-item 1:1 (transparent surface, 8/10/8/12 padding, 12px
radius, 44×44 logo with 10px radius, optional EPG progress placeholder,
0–3 button placeholders) plus a thin app-channel-list-skeleton wrapper
that renders N rows with deterministic width variance, and route every
live-tv loading state through it (m3u channel-list-loading-state,
xtream portal-channels-list, stalker live-stream-layout via a derived
isInitialChannelsLoading signal, and the unified favorites/recent
collection page). Drops the bespoke channel-skeleton-shimmer keyframes
in favor of the shared skeleton-shimmer animation.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: 58a2d50756dd
The three channel-list views (all-channels, groups, favorites) each had
an enrichedXxx computed signal that, on every progressTick (~30 s),
spread-cloned every channel in scope to attach { epgProgram, logo,
progressPercentage }. On a 90 K-channel M3U playlist, all-channels-view
allocated ~90 K objects per tick — persistent young-gen pressure and
visible GC stutter on large lists.
Replace the pattern with a side-car ChannelEpgMetadata map keyed by EPG
lookup key, holding only entries for channels that actually have EPG
data (typically a small fraction of the playlist). Templates iterate
the raw channel array and look up { epgProgram, progressPercentage }
inline. Logo resolution moves to a per-row method call — under OnPush
+ virtual scroll only ~50 visible rows check at a time.
groups-view's selectedGroupChannels also lost its progressTick
dependency: sorting + filtering only reruns when the selected group or
sort mode changes, no longer every 30 s.
The EnrichedChannel interface is replaced with a smaller
ChannelEpgMetadata. Specs that asserted on the cloned `.logo` field now
call `getLogoForChannel(channel)`.
Inspired by matracey/iptvnator@8d78cc0, @b9e6e82, @296d61e — ported as
a single coherent change. Their version missed our second site
(selectedGroupChannels) and didn't address the per-tick logo cloning.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: e400bd558b10
Three placeholders were rendering at once when a search filter cleared
both the groups rail and the channel list, and they each used a
different visual treatment:
1. Groups rail (.groups-nav-empty) was bare 0.82rem muted text with no
icon and no hint, and routed through CHANNELS.NO_SEARCH_RESULTS
("No channels found") which is wrong copy for the *groups* column.
2. Channel list (.groups-content-empty-state) was the canonical L4
icon + title + hint pattern (correct).
3. Player area (<app-portal-empty-state>) was a 72px icon at 0.2
opacity, which read as ghosted on dark theme.
Bring the groups rail into the L4 family scaled down for the narrow
column: 28px search_off / folder_off icon at 0.5 opacity, 0.85rem
title, 0.78rem hint at 0.65 opacity, centered. Add a CHANNELS.NO_GROUPS_FOUND
i18n key so the copy reflects the column ("No groups found").
Bump portal-empty-state's icon opacity from 0.2 -> 0.35 and title
opacity from 0.5 -> 0.6 so the player-area placeholder feels present
rather than abandoned.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: 6719280e397b
Audit found 10 list-rendering components (each >150 lines, all using
signal-based state) on default change detection. Default CD re-checks
every binding on every parent CD cycle (mouse moves, EPG progress
ticks, etc.); under OnPush these only re-check when their own signals
change or when explicitly markedForCheck.
All 10 use signals exclusively for state (no manual subscribe-and-mutate
patterns), so the conversion is straightforward and safe.
Components:
- recent-playlists (740L) — homepage playlist list with drag-drop
- vod-details-route (552L) — Xtream VOD detail page
- playlist-switcher (509L) — workspace shell playlist switcher
- season-container (444L) — Stalker/Xtream series episodes (DoCheck preserved)
- stalker-search (362L) — Stalker search results
- search-results (350L) — Xtream search results
- category-management-dialog (199L) — manage Xtream categories
- recently-added (162L) — Xtream recently-added rail
- category-content-view (Catalog) — category browse page
- grid-list (shared) — generic grid renderer used across portals
Tests: 124 passed across all touched lib projects.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: 2e1a36e2f0f6
Replace the dashed-bordered "Ooops" placeholder in the EPG side panel
(rendered when the selected date has no programmes) with the icon +
title + hint pattern already used by groups view, season container,
and portal empty states.
The dashed border was a visual outlier — every other empty state in
the codebase is borderless, and a dashed stroke conventionally signals
a drop-zone or "add new" affordance, neither of which applies to a
passive informational state. The new layout uses a 48px event_busy
icon at 0.5 opacity, a 1.05rem title, and a 0.85rem hint at 0.65
opacity, centered in the panel via flex.
Soften the EN microcopy ("Ooops, EPG is not available for the selected
date" -> "No program guide", which also fixes the "Ooops" typo) and
add a NO_GUIDE_HINT key with localized strings across all 18 locales,
nudging the user toward the date arrows or playlist refresh.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: 4bfb62f988b7
PortalChannelsListComponent renders a virtual-scrolled channel list (Xtream
live/VOD/series, can be 1000+ items). It was using default change detection,
so every CD cycle in the parent tree (EPG ticks, progress updates) re-checked
every binding. Switch to OnPush — the existing cdr.detectChanges() calls
already cover the async update paths, and signal-based state marks for check
automatically.
Replace track $index with track program.start in two EPG @for loops
(epg-list, multi-epg-container search results). $index causes Angular to
re-create DOM nodes whenever the list reorders (e.g. on EPG refresh or
timezone correction). program.start is the ISO datetime — unique per
program within a channel and stable.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: 3d6901072049
Use Map and Set lookups for M3U favorite aggregation, dashboard global favorite mapping, and channel-list favorite/group resolution.
Remove the duplicate NgxIndexedDB provider registration and add regression coverage for duplicate URL and earliest-match behavior.
Entire-Checkpoint: c2cea9c530e6
The favorites and recent views had local #id { overflow-y: auto }
which has higher CSS specificity than the global .app-scrollbar class.
On macOS, overflow-y: auto means overlay scrollbars that auto-fade,
so the gutter and themed thumb were never reserved.
Bake overflow-y: scroll into the utility itself (its whole purpose) and
drop the now-redundant overflow-y: auto from the two local rules.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: b2d2124cd992
Round out the channel-list-container views so the favorites and recent
panels get the same persistent scrollbar gutter and themed thumb as the
all-channels and groups views.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: 2301533420c9
Move the always-visible themed scrollbar from epg-list into a global
.app-scrollbar utility class in styles.scss. Apply it to the All
channels and Groups view virtual-scroll viewports so the channel list
gets the same persistent gutter and themed thumb as the EPG list.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: c470abf78379
Switch to overflow-y: scroll with scrollbar-gutter: stable so the gutter
is reserved (no layout shift between scrollable and non-scrollable
days). Locally style the thumb with --app-muted-color so it's clearly
visible across themes and platforms, overriding the global 6px
near-transparent style which was being hidden by the macOS overlay
auto-fade.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: 918ee7ade2f3
Separation: replace 4px gap with hairline dividers via ::before, hidden
around the active and current-program rows so they read as a continuous
emphasized block. Title line-height 1.4 → 1.3 + letter-spacing -0.01em
to match channel-name. Time uses en-dash, 0.78rem (parity with summary
bar), token-driven --app-muted-color. Description clamped to one line —
full text remains one click away via the info icon.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: b0389ce441a1
Drop the gradient + bevel + drop-shadow chrome from EPG rows so the panel
speaks the same flat-by-default visual language as the channel list. Add
--app-live-color token, tokenise the LIVE badge, tighten typography
(weight 600, text-wrap balance/pretty), and bump the info icon to 32px
for Fitts-compliant hit area.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Entire-Checkpoint: 4cc5371f549e
- Introduced tooling for building and staging the macOS `libmpv` runtime for IPTVnator's embedded MPV player.
- Added `build-macos-runtime.mjs` for building an LGPL-compatible runtime from source.
- Created `stage-macos-runtime.mjs` for staging the built runtime artifacts.
- Implemented validation for the packaged embedded MPV runtime in `electron-after-pack.cjs` and `embedded-mpv-macos.cjs`.
- Updated packaging scripts to ensure the embedded MPV runtime is correctly integrated and validated during the build process.
- Added README files to document the expected layout and usage for the embedded MPV runtime artifacts.
Entire-Checkpoint: c6e522b4276c
- Introduced StalkerCollectionDetailComponent to handle detailed views for Stalker collections.
- Added XtreamCollectionDetailComponent for managing Xtream collection details.
- Updated routing components to integrate new detail components for both Stalker and Xtream.
- Enhanced global favorites and recently viewed functionalities to support new detail navigation for Stalker and Xtream items.
- Improved styling and structure for better responsiveness and user experience in detail views.
Entire-Checkpoint: c6e522b4276c
Tedd Johnson