mirror of
https://github.com/4gray/iptvnator.git
synced 2026-10-11 02:46:16 -08:00
56733db1ecf998a0f4fafa0151854cdead436670
656
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 4grayandClaude Opus 5
|
56733db1ec |
fix(portals): gate VOD auto-failover on engines that can report failures
Merges master and resolves the collision with its shared playback helpers, then closes two Codex findings. Master extracted the Play/Stop button state and the inline position writer that this branch had modified. Rather than forking private copies back out of Xtream, both behaviours move into the shared helpers: `alsoOwns` lets a page own an external session launched for a copy of the same film in another playlist, and the resume latch — which stops a timeupdate emitted before the engine reaches `startTime` from overwriting the point being resumed from — now protects Stalker too, which had the same bug. Auto-failover was offered on every engine, but only the built-in web players raise the playback diagnostic that reaches `onPlaybackFailed()`: Embedded MPV has its diagnostics suppressed and MPV/VLC play outside the app. The toggle is now hidden there, in settings and in the sources menu, instead of promising a switch that can never happen. `setAutoFailover` also ignored `updateSettings()`, which patches memory first and rejects if the write fails — the toggle looked saved, silently reverted on restart, and the rejection surfaced only as an unhandled promise. It now reports the failure like the settings form's own save paths. The three VOD-details route specs each carried a near-identical 150-line TestBed; they now share one harness, which is what makes room for the new cases (1012 -> 584 lines). Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5
|
80af9257a0 |
refactor(portals): share external-button and position-writer logic (#1298)
The Xtream and Stalker VOD detail views each carried a private copy of two behaviours: deriving the Play/Stop button state from the active external (MPV/VLC) session, and throttled persistence of the inline player position. A Play button or a resume point that behaves differently per portal is the kind of divergence users notice, so both now read from one implementation. Extracts `createExternalPlaybackButtonState` and `createInlinePlaybackPositionWriter` into portal/shared/util, and lifts the Stalker VOD download errand into its own helper. Behaviour is unchanged; the shared helpers are deliberately identical to the copies they replace. This also brings both hosts back under the 400-line ESLint limit, neither of which was baselined: vod-details.component.ts 389 -> 333 stalker-catalog-detail.component 394 -> 325 vod-details-playback.service.ts 345 -> 275 Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5
|
9f0a8b4f19 |
Merge master, dedupe the kept copy, and retire superseded switches
Master had moved ten commits ahead. Two conflicts, both resolved without losing either side: the `XTREAM_PROBE_URL` handler this PR extracted into `events/stream-probe.ts` stays extracted (master added performance capture nearby but never touched that handler), and the mock-server scenario table takes the union of master's `performance` row and this branch's `multisrc` pair. Two findings fixed alongside it. Pinning the copy the route is already on makes discovery return that very row, so prepending the current source listed one stream twice — a phantom copy in the grouping and a chip that counted it. And handing the "playing" badge back to the route row left an in-flight switch valid, so a slow resolution could arrive afterwards and replace the playback the user had just started with Play, Resume or Restart. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
4gray
|
a2fafcfc08 |
test(performance): add end-to-end Xtream benchmark harness (#1300)
* docs(performance): plan Xtream benchmark * feat(xtream-mock-server): add deterministic 100k fixture * style(xtream-mock-server): apply repository formatting * fix(xtream-mock-server): harden performance fixture data * feat(xtream-mock-server): add performance control plane * docs(performance): correct Xtream capture plan * fix(xtream-mock-server): harden performance controls * fix(xtream-mock-server): harden control lifecycle * feat(performance): add Xtream preload markers * feat(performance): trace Xtream main phases * feat(performance): mark Xtream store publications * feat(performance): trace Xtream database phases * feat(performance): trace Xtream delete cancellation * feat(performance): capture Xtream phase attribution * feat(performance): mark Sources Xtream refresh * test(performance): define Xtream benchmark evidence contracts * test(performance): add Xtream benchmark runner * test(performance): surface failure evidence writes * test(performance): align database read clock * test(performance): preserve capture failure contracts |
||
|
4grayandClaude Opus 5
|
0c891f13d8 |
fix(portals): release the resume latch when the target cannot be reached
Carrying a position into a shorter cut of the same film — two hours into a 90-minute source — leaves the engine unable to ever report that time, so the one-shot latch never released: every position save was suppressed for the rest of the session, and the impossible start time kept being reported to multi-source for the next switch. The latch now also opens when a known duration puts the requested point out of reach, while a reachable one still waits as before. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5
|
7459f993e2 |
fix(portals): let the height veto a width match, and hold the failure state
Two follow-ups to the previous round, both in code it introduced. A width that matched exactly one sub-HD format ignored the height entirely, so 640x480 came back as 360p — a measurement the numbers contradict. The height now vetoes, but only in the direction that can be wrong: cropping removes lines, so a SHORTER frame is a letterboxed master of that format and the width still names it, while a taller one is a different shape and gets no tag. That keeps the reason width is preferred in the first place. And picking a source off the error screen cleared the failure state before the switch resolved, so an alternative that could not be resolved left the diagnostic on screen while the caption went back to claiming playback. The flag now clears only once a switch actually starts something. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5
|
2915771b0f |
fix(portals): match the sub-HD formats, and drop the caption on failure
Two follow-ups to the previous round, both the same rule again. The 800-wide band still answered from the width alone, so 800x600 and 800x450 were labelled 480p — published with `api` provenance, so read as a measurement. Sub-HD formats are now matched against known shapes with the same 5% tolerance the height path uses, and anything unrecognised carries no tag at all. And "Playing from ..." survived a playback failure: the inline host stays mounted while the diagnostic is on screen, so the page named a source for a stream it had just reported it could not play. The caption now clears on failure and returns when the engine produces time again. Splits the route playback spec along the "what it does" / "what it claims" seam and lifts the repeated active-source stub into one helper. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5
|
7045f2d665 |
fix(portals): stop claiming playback, a cached answer and a resolution
Three findings, all of them the same rule: never state as fact something the app has not established. The "Playing from …" caption appeared as soon as discovery marked a source active — before Play was pressed, and again after the player was closed. It now requires a player that is actually running. Probe answers were cached by URL alone, but the request now carries the playlist's headers. Two playlists sharing a stream URL could therefore be told the other's answer, marking a source dead without ever asking it. And any width below 900 was labelled 480p, published with `api` provenance: a 640x360 stream stated 480p as a fact, and a 720x576 PAL source likewise. Widths below HD only resolve with the height — 720 is NTSC 480p or PAL 576p — so an unrecognised shape now carries no quality tag at all. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5
|
11e4e89d66 |
fix(portals): write the pin before retiring it, and keep the badge honest
Three findings from the latest review pass. Repinning cleared the old rows and then wrote the new one, so a write that failed after the clear left nothing persisted while the row still showed the old pin. The order is reversed: the new key is stored first and the stale ones retired only once it landed. Lookups are most-trusted-first, so a leftover alias never outranks what was just written. Starting a source from the picker, or letting a pin decide the primary Play, never recorded the movie as recently viewed — unlike every other way of playing it. And closing an alternative's player and pressing Play started the route stream while the controller still marked the alternative active, so the picker and caption named a source that was not running. Moves the discovery pass into the session module beside the switch and failover mechanics, and splits the pin spec along the persistence/playback seam, both to stay inside the file-size rule. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5
|
decde93f60 |
fix(portals): stop a rediscovery restoring the pin it started with
A same-movie rediscovery read the pin, then held that snapshot across its source lookup and applied it afterwards. A pin made while the lookup was out was therefore overwritten by the older value: the row and the primary Play action named a source the database no longer held. The snapshot is now applied as soon as it is read, so a later write simply wins on ordering rather than needing to be detected. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5
|
ce1b1f3269 |
fix(portals): keep a pinned play, a same-playlist copy and Check honest
Five findings from the latest review pass. Reading a pinned source's own position is a database round-trip, and the user can navigate across it — the continuation then handed one film's source id to whichever movie now owned the screen. Guarded, like every other await here. Allowing a pinned copy to live in the current playlist made "is this the route's own source?" a two-part question, and the ownership check still asked only about the playlist: an external session for that copy was disowned, so Stop vanished and its progress was dropped. The yearless title alias is shared by every remake, so clearing every alias before a write could delete a different film's pin. Writes and unpins now touch only keys that name one film — plus the ambiguous row this session actually read, which is the one the user is looking at and the one whose absence would make an unpin come back. Restart left the seeded position in the controller, so a failure before the first timeupdate resolved the next source back at it. And the alternative rows on the playback-error screen had a Check button wired to nothing at all. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5
|
f0c99fac87 |
fix(portals): stop a remake matching, and let a pin survive its own playlist
Three findings from the latest review pass. `normalizeTitleKeys` strips bracketed segments as tag noise, so "Dune (1984)" normalizes to exactly "dune" — an EXACT match for the 2021 film, ranked above every fuzzy one, with the year never consulted because that tier skipped the gate. Auto-failover could switch the user to the other film entirely. The year is now read out of brackets too, and a stated disagreement rejects the row on either tier. Playback positions are keyed by (playlist, stream), so watching through a pinned alternative stores progress under ITS ids while the page loads the route copy's row. Starting the pin therefore resumed from a position belonging to a different copy — usually zero. It now loads its own. And a pin can point at another copy of the film inside the playlist being viewed, which discovery excludes wholesale: the pinned row was absent from the list, so nothing showed as pinned and Play ignored the preference. The pin is now read before discovery, which keeps that one row. Moves the pin-shaped decisions into the pin module, where the persistence helpers already live. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5
|
ed442da3ca |
fix(portals): re-check the movie after waiting, and follow the alternative
Three findings, two of them regressions from the previous round. Awaiting a pending discovery before failover let the user navigate during that wait: the continuation then ran against whatever controller was current and could answer one film's playback failure by starting another film's alternative. Both waits — failover and pinned Play — now re-check that the same movie still owns the screen. Pinned Play also needed the wait it did not have. Pressing Play while the pin lookup was still out concluded "nothing is pinned" and started the route's own source, making a persisted preference depend on worker latency. And the position bridge still accepted only the route's ids, so an external player running an alternative had every progress update discarded: the resume point stayed where playback began and a switch an hour in rewound the lot. The session matcher and the bridge now share one ownership predicate, since a page that shows Stop for a session whose progress it throws away is the bug in two halves. The test for the external case previously set the position signal directly, which bypassed the very filter that was broken; it now drives the bridge. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5
|
b1ad9657c3 |
fix(portals): probe like playback, and stop the pin answering for a remake
Five findings from the latest review pass.
Writing a pin to every alias — last round's fix for stale aliases — was
wrong in the other direction: `title:{base}:` is shared by every remake, so
a known-year decision stored there answers for a different film. Pin Dune
(2021), open Dune (1984) before its year arrives, and it would start the
2021 source. A write now clears every alias and stores only the canonical
key, which retires the stale ones without making any of them ambiguous.
The probe checked a bare URL while playback sends the playlist's User-Agent,
Referer and Origin. A panel that requires them answers 401/403, so a stream
that plays perfectly was reported dead and penalised in failover ranking.
The switch toast interpolated the raw playlist name. Users routinely name a
playlist after the URL they pasted, so that line could put credentials over
the video; the notice now carries the same safe label the rows use.
External players have no timeupdate, so their polled position IS the live
one. Feeding it through the seed — which stops at the first value — froze
the resume point where playback started, and a switch an hour in rewound to
the beginning.
And auto-failover concluded "nowhere to go" when a stream failed before
discovery answered, stranding the user on the error screen.
Moves `switchTo` into the session module, which is where the rest of the
switch mechanics already live, and splits the route spec along the same
rendering/behaviour seam the other suites use.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
4grayandClaude Opus 5
|
e3465d3a45 |
fix(portals): make every alias of a pin agree, and stop losing rows
Four findings from the latest review pass. A pin lookup accepts several aliases of the same movie, but a write only touched the most-trusted one — so after enrichment the title alias still pointed at whatever was pinned before, and a reopen that read it (because TMDB had not landed yet, or its request failed) started the source the user had just replaced. Writes now go to every alias. That alias set was also missing one. Enrichment supplies the year as well as the id, so a pin set before either existed is stored yearless; the candidate list skipped that form entirely and orphaned the row. Discovery could lose whole playlists: one playlist listing a film in dozens of categories produces identically ranked rows that fill the window before another playlist is read. The collapse now happens in SQL, before the limit, rather than in TypeScript afterwards where the missing rows are already gone. And an abandoned source pick finishing late cleared the spinner from the row the user was actually waiting on. Removes `isExhausted()` from the host service — no caller outside its own tests, where the assertion above it already proved the same thing. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
4gray
|
bfad82c26c |
fix(settings): stop settings silently reverting on restart (#1272)
Settings live in the renderer's IndexedDB, and two failure modes made them look saved while nothing reached disk. A second app instance sharing the same userData directory cannot take the Chromium storage lock, so its renderer reads defaults and every write is dropped. The app now holds a single-instance lock and focuses the running window instead of starting a rival copy. The lock is requested after the userData override so E2E runs with their own data dir keep independent locks, and after Squirrel event handling. IPTVNATOR_ALLOW_MULTIPLE_INSTANCES=1 opts out for local CDP debugging. updateSettings() patches in-memory state before persisting and the submit path had no rejection handler, so a failed write produced an unhandled rejection and no user-visible feedback. SettingsStore now records which half of the round trip failed, and the settings page surfaces it through a dismissible error snackbar; the dialog stays open on failure so the save can be retried. Two follow-ups from review, both wider than the report: - a second launch now re-creates the main window when the lock owner has none left, so closing the last window on macOS no longer leaves a second launch quitting silently with nothing on screen - App.onMainWindowCreated() re-runs window-owned bindings for every rebuilt window, so the downloads broadcaster stops holding a destroyed window. This also fixes the same bug on the pre-existing dock `activate` path. Closes #1156 Closes #102 |
||
|
4grayandClaude Opus 5
|
df30262f24 |
fix(portals): keep external playback, the pin and the resume point honest
Five findings from the round-5 review. An external player launched for an alternative carries that playlist's ids, so the page disowned its own session: the primary button never became Stop, stopping found nothing to stop, and another click opened a second player. Multi-source now tells playback which source is actually active, and the matcher accepts either that or the route's own stream. Stop also has to beat the pin. The primary action consults the pin first — that is what makes a pin decide where playback starts — but while a session is running the same button reads Stop, and consulting the pin there made the control do the opposite of its label. A pinned source started from the Resume button resolved at zero, because nothing reports a live position until the first timeupdate. The controller is now seeded from the persisted position, one-way: a live value always wins, since the stored one lags it and applying it would rewind. A pin whose write failed was still shown as pinned, promising a preference that reopening the movie would not have. Portal failures in this path logged raw errors. An Xtream error message carries the stream URL, and that URL is built out of the username and password, so they now go through the redacting logger. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5
|
d3e337261e |
fix(portals): stop a pin write from landing on the next movie
Two findings from the review of the previous round. A pin write is an IPC round-trip, and the user can navigate during it. The continuation then applied one film's answer to another film's controller — and because unpinning returns "nothing pinned", it would clear the pin the new movie had just loaded and its Play action would quietly stop starting from the preferred source. It now commits only while the same film is still on screen, like every other async path here. The short-title scan drops its row limit. FTS keeps its window because it ranks by relevance, so what it keeps is what matters; a scan cannot rank, so a window there silently decides which valid sources the user is allowed to see. It also bought nothing: the GLOB cannot use an index, so SQLite reads every row either way and the limit only truncated the answer. What bounds the scan is its predicate — reaching it means the whole title is one or two characters. The switch-notice type moves to the module that builds it, which also removes a circular type import between the two. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5
|
6cce35274a |
fix(portals): keep the playing row when the refined year rejects it
Follow-on from keeping the session across a rediscovery. The rerun can legitimately drop the row that is playing: enrichment supplies the release year, and the year gate then rejects a copy the yearless search had admitted — "Dune" 1984 while the user is watching the 2021 film. Off the list is right; it is not the same film. Off the screen is not. It is what is streaming, so it stays as a row and keeps the playing badge, rather than letting the caption name a playlist that is not sending any bytes. Also covers the new session key directly in the identity spec. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5
|
93caa1c5a6 |
fix(portals): stop the source list from losing the real alternatives
Six review findings, all in how multi-source decides what to show and what it is playing. Discovery: the current playlist is now excluded in SQL rather than after the fact, so its own duplicate rows can no longer spend the whole row budget before a single alternative is read. The short-title scan matches the token as a word instead of a substring and orders by title length in a wider window, so "Titanic" and "The Italian Job" cannot push the real "It" out of it. Session: metadata enrichment re-runs discovery for the film already on screen. That is a refresh, not a new session — a second identity key (playlistId:contentId) now separates the two, so the source the user switched to keeps playing and stays named, the tried set stays burned, the position survives and a switch in flight still commits. Resume: the multi-source controller no longer records the engine's pre-seek timeupdate at ~0. The playback service's one-shot latch now reports whether the position can be believed, and until it can, the requested start time stands in — so a switch during the initial seek does not restart the film. UI: the in-player sources picker gets the same auto-failover setting and match kind as the detail page's, instead of always rendering the default and dropping the toggle. The caption counts distinct playlists, not stream variants, since the popover groups a portal's copies under that portal. Session mechanics and the pin toggle move into their own modules to keep the host service inside the line budget. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5
|
1936b45d0f |
fix(portals): invalidate the session while the movie identity is empty
The staleness guard added in
|
||
|
4gray
|
24f0dee6f0 |
test(performance): add formal M3U import benchmark (#1287)
* test(performance): add formal M3U import benchmark * test(performance): harden formal capture validity * test(performance): address benchmark review feedback |
||
|
4grayandClaude Opus 5
|
5514def368 |
fix(portals): make the pin decide playback and keep failover going
Second round of Greptile review findings.
**A pin had no behavioural effect.** Loading a stored pin only decorated the
row: Play still started the route's playlist and failover ranking ignored
`isPinned`, so "make this the main source" survived a restart as an icon and
nothing else. The primary action now starts from the pinned source when one is
set, and the pin outranks everything else in failover ranking.
**Failover stopped at the first unresolvable candidate.** An expired account or
a failing `get_vod_info` on the top-ranked source ended the attempt, and since
production calls `failover()` only once — on the original playback failure — a
healthy lower-ranked source was never reached. It now continues through untried
candidates. `switchTo` reports why it stopped so the loop can tell "could not
resolve, try the next one" from "something newer owns the screen"; without that
distinction a superseded switch would have spun forever, because only the
former marks the candidate tried.
**Identity ignored enrichment.** The key was `playlistId:contentId:title`, so
when `get_vod_info` added a TMDB id and release year to an unchanged title the
host saw no change, never reloaded, and kept yearless discovery and title-only
pin keys — a `tmdb:`-keyed pin could never be found. The key now covers every
field that affects matching.
**A server refusing HEAD read as unavailable.** Some stream hosts answer 405 or
501 to HEAD yet serve the media over GET. The probe now retries once with the
ranged GET the main process already supported, instead of caching a working
source as failed and penalising it during failover.
Greptile also flagged a missing token check after the resolve await in
`switchTo`; that guard landed in
|
||
|
4grayandClaude Opus 5
|
4db3a2fdea |
fix(portals): stop stale source resolutions from committing
Addresses three defects Greptile found in the multi-source review. **Concurrent switches committed out of order.** Selecting a second source before the first resolution returned let the slower request overwrite the newer selection and repoint Undo at itself. `switchTo` now takes a sequence number and drops its result if a newer switch already committed. **Stale switches crossed movie sessions.** Navigating to another film while a resolution was in flight let the continuation activate the old film's source inside the new controller — and restart it from that session's zero resume position. The controller is now snapshotted per operation and the movie session is revalidated after every await. `check()` had the same hazard across its two awaits and is guarded the same way. **Short titles skipped discovery entirely.** The trigram tokenizer cannot index tokens under three characters, so "Up", "It" or "Us" produced an empty MATCH expression and the query was discarded before SQLite was consulted — the chip could never appear for those films. Discovery now falls back to a bounded scan when FTS structurally cannot serve the title; the existing two-tier normalized confirmation still rejects loose hits like "Upgrade". Each fix carries a regression test; all three were mutation-checked by removing the guard and confirming exactly those tests fail. The previous test asserting that short titles return nothing encoded the bug and has been replaced. The host spec passed 400 lines, so its fixtures moved to a shared module and the race suite into its own file. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5
|
004cb65fe6 |
feat(portals): find the same movie in your other playlists
A movie that exists in several imported Xtream playlists now shows a "Sources N" chip on its detail page and in the player. Switching playlist mid-film keeps the timecode, a preferred source can be pinned per movie, and a failed stream offers the alternatives instead of a dead end. The governing rule is that a guess is never presented as a fact. Every metadata value carries where it came from — `api` (the provider said so), `parsed` (inferred from the title) or `probe` (we contacted the stream). Facts render as plain tags, guesses are prefixed `~` in a warning colour, and an unknown value renders no tag at all plus a "check" affordance. Ranking and failover read through `factualOnly()`, so a filename claiming 4K is structurally unable to outrank a source that was actually reached. A probe that could not complete reports "unknown", never "unavailable". Scope is deliberately narrow: Xtream to Xtream, movies only, Electron only. Stalker never reaches the `content` table and M3U is a JSON blob whose search forces live content; both are additive later, since the candidate type already carries all three portal kinds. In the PWA every entry point is gated off and the chip renders nothing. Auto-failover is opt-in and off by default. Each source is tried at most once per session, so it terminates structurally, and the switch is never silent — the toast names the new playlist, offers an undo, and warns that the dub may differ only when both sides state an audio track as fact. Notable details: - Playlist names are routinely the pasted URL, credentials included. They are never rendered raw; a short host-only label is derived instead. - Quality is derived from pixel width, not height: a 2.39:1 1080p master is 1920x800, and bucketing that by height would publish "720p" as a fact. - Switching is a single `inlinePlayback.set()` so the player and engine survive and re-seek; the carried position is read before the 15s persistence throttle so it does not rewind. - Sources from one playlist collapse into a group, since the same film often appears there several times under different stream ids. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
4gray
|
e55d55b47f |
feat(mock-data): add shared screenshot-safe poster catalog (#1271)
Moves the fictional movie catalog into `libs/shared/marketing-fixtures` so the
Xtream and Stalker mocks describe the same titles, and adds 20 rendered posters
plus the shared fixture types behind them.
Supporting changes made while getting it green:
- `shared-marketing-fixtures` is classified Tier B in the coverage policy. Not
Tier A: it is fictional fixture data, so a statement percentage over it means
nothing, and a Tier A entry would pull it into the merged coverage map and the
ratchet. Tier B still runs its spec in CI. `stalker-mock-server` needs no entry
of its own — it is already Tier C and the Tier B/C runner falls back to
`pnpm nx test <project>`, so its new `marketing-poster-url.spec.ts` runs.
- Two release-capture defects the catalog reorder introduced, both fixed in
`tools/release/capture-app-driver.ts`:
- VOD stream ids are `MARKETING_VOD_STREAM_ID_BASE + index` and the generator
now lists the showcase movies first, so 62000-62002 became Black Harbor, The
Paper Astronaut and Summer Static while the dashboard seeding still mapped
those ids to the previous titles' backdrops.
- the raw `tsx` spawn of the Xtream mock lacked `--tsconfig
tsconfig.base.json`, so the mock could not resolve
`@iptvnator/shared/marketing-fixtures` and the capture never started. Both
mock projects' own serve targets already passed the flag.
|
||
|
4gray
|
0579d253c4 | fix(electron): fail closed on unknown performance completions | ||
|
4gray
|
f9e71a6d8d | fix(electron): isolate refresh performance correlation | ||
|
4gray
|
e3ce60a35e | chore(electron): add preload performance markers | ||
|
4gray
|
08b868d6c1 |
test(electron): harden runtime boundary coverage (#1267)
Adds contract-focused regression coverage for the Electron HTTP server, remote-control events, settings events, and managed download paths, and makes Tier A coverage fail closed when instrumentation fails or a runtime-owning production file disappears from a project or from the merged Istanbul report. The old `coverage:ci` exited 0 despite a `Failed to collect coverage` diagnostic: libs/m3u-state/src/lib/effects.ts was simply absent from the merged map. All 30 Tier A reports are now required, the merged map covers 710 files, and effects.ts is reported as 0/159 instead of silently disappearing. Also fixes remote static-file path containment for encoded, malformed, NUL, POSIX and Win32-style traversal inputs, with behavior-preserving testability seams. Statements 69.27% -> 69.54%; http-server.ts 0% -> 90.21%, remote-control.events.ts 0% -> 96.55%, settings.events.ts 59.25% -> 96.29%. |
||
|
4gray
|
1ab82b04a1 |
refactor(deps): drop uuid for a shared crypto-based id helper (#1266)
Supersedes #1252 and #872. uuid 14 is ESM-only, apps/web/jest.config.ts only kept v9 working by mapping `^uuid$` at a `wrapper.mjs` that v14 no longer ships, and the specifier also has to be synced in libs/shared/m3u-utils/package.json or @nx/dependency-checks fails lint. All four call sites only used `v4()`, so the dependency goes away instead. `createRandomId()` prefers `crypto.randomUUID()` and falls back to building the same v4 shape from `crypto.getRandomValues()` — that fallback is load-bearing, because randomUUID is only exposed in secure contexts and the self-hosted PWA is regularly served over plain http on a LAN address. getRandomValues stays available there, and it is what uuid's own v4 used. `@types/uuid` goes too; it only existed for the untyped v9 package. |
||
|
4gray
|
9ae53e4515 |
fix(playback): make the "Show subtitles" setting reach the web players (#1269)
The persisted subtitle preference only ever had an owner behind the default-off shared web-controls flag, so with the shipping controls it did nothing: Video.js never read it, ArtPlayer declared the input but never used it, and the HTML5 player only ran a one-shot pass after play() resolved — before hls.js had added its text tracks. No portal host bound the input at all, so it never reached Xtream or Stalker pages either. Extract the source-local track controllers into the adapter-free WebVideoSourceTracks and have WebVideoSourceControlsBridge wrap it, so both controls modes apply the preference through the same code. The preference-off players bind it directly (VjsLegacyTracks for Video.js), and WebPlayerViewComponent reads the preference from SettingsStore instead of an input so every host inherits it. The preference means different things depending on who renders the caption UI: shared controls stay authoritative for the session, while vendor chrome is source-default — the preference seeds each new source and is released once the media reports playing, so the engine own caption menu keeps working. Mode selection is an optional playbackStarted probe passed to the HLS, native and Shaka helpers; in that mode the HLS helper deselects the track rather than hiding it, since subtitleDisplay would silently override the vendor menu. Closes #1155 |
||
|
4gray
|
f147d4fe37 | perf(m3u): stop cancelled refresh workers (#1268) | ||
|
4gray
|
3032cfa88d | fix(m3u): avoid persisting hydrated favorites (#1232) | ||
|
4grayandClaude Opus 4.8
|
a5bb8dc25c |
fix(tmdb): series cast was the latest season only, not the show (#1242)
* fix(tmdb): series cast was the latest season only, not the show
TMDB documents a TV id's `credits` as the credits of the LATEST SEASON.
We requested exactly that and rendered it as "the cast", so every
long-running show lost every regular who had left: The Boys showed
whoever appears in the newest season, not the ensemble.
The TV details request now also appends `aggregate_credits`, which spans
the whole run — but per TMDB omits the newest season, so neither payload
alone is the cast. `unifiedTvCast` unions them: whole-run billing order
first, then people who appear only in the newest season, deduplicated by
person id. Characters come from the aggregate `roles[]` shape.
Deliberately NO cache-key bump. Rows cached before this simply lack
`aggregate_credits` and keep the previous behaviour until they expire,
which avoids invalidating every user's details cache twice — the roadmap
schedules one consolidated bump once the remaining append_to_response
additions (images, certifications, alternative_titles) land together.
Movies are untouched: /movie/{id} has no aggregate_credits and its
`credits` is already the full cast.
Tests: departed regulars retained, newest-season arrivals appended after
show billing order, characters read from roles[], no duplicates across
the two payloads, graceful fallback for pre-aggregate cache rows.
Refs docs/architecture/tmdb-roadmap.md A2.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(tmdb): reserve cast slots so newest-season arrivals survive the cap
The union was appended aggregate-first and then truncated to ten, so on
exactly the shows it was built for — long-running ones, where the
whole-run cast alone exceeds the limit — every newest-season arrival was
sliced back off. The original fixture had two aggregate members and
could not catch it.
unifiedTvCast now holds back up to three slots for the top-billed
arrivals instead of appending them where the cap discards them, and
gives the slots back when nobody is new.
Tests: a 12-member aggregate plus two arrivals keeps both arrivals and
top billing; an aggregate with no arrivals still gets all ten slots.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* test(tmdb): split the series-cast suite out of the merge spec
The merge conflict resolution put both new describes back into
tmdb-merge.spec.ts, pushing it to 499 lines — past the 400-line
max-lines cap. The aggregate-credits suite moves to its own file.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(tmdb): stop the cast union from shrinking, and bound what it caches
Three follow-ups from a review pass over the aggregate-credits union:
- The reserved arrival slots were subtracted from the aggregate even when
the aggregate was shorter than the cap, so a show with four regulars and
five newcomers returned seven names instead of nine. The reservation is
a floor for arrivals now, not a quota.
- An aggregate member's character came from the first role with any text,
so a one-episode cameo could outrank the part the actor is known for.
Pick the role with the most episodes.
- aggregate_credits carries a show's whole-run cast AND crew, and details
payloads are cached verbatim — orders of magnitude of JSON for a list
the merge truncates to ten people. Cache the billing-order prefix and
drop the crew nothing reads.
Extracting the people-related helpers into tmdb-credits.ts keeps
tmdb-merge.ts under the line cap.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(tmdb): keep the aggregate ids the arrival check depends on
Trimming the cached cast to its top 40 broke the property it was supposed
to preserve: `known` is built from the aggregate ids, so a returning actor
billed below the cut read as a new arrival on the cached path and took a
reserved slot. The same show then showed a different top ten on its second
open than on its first.
Keep the whole cast, and cut the two things nothing reads instead: the
aggregate crew, and every `roles[]` entry except the one the merge picks
(most episodes). A merge over the trimmed payload now provably returns
what a merge over the full one does — covered by a test that runs both.
Also points CLAUDE.md and the doc's module table at tmdb-credits.ts, where
the credit helpers now live.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* docs(tmdb): add the release note for the series-cast fix
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(tmdb): let the cache trim reuse the merge's own role choice
The trim picked the role with the most episodes; the merge picks the
NAMED role with the most episodes. TMDB uses unnamed roles for uncredited
appearances, so a member whose blank role outranked their real one lost
their character on every render after the first.
Both now call pickAggregateRole, which is the point — two copies of the
same choice are what let them drift.
Also adds a test pinning the property the earlier truncation defect broke:
the displayed cast is the cap or everyone available, whichever is smaller.
Which people make the cut at the cap is the reservation's job and is
deliberate; the count is not negotiable.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* docs(tmdb): state the aggregate-credits contract as TMDB actually words it
TMDB describes the endpoint in one sentence that contradicts itself: "it
does not return the newest season. Instead, it is a view of all the entire
cast & crew for all episodes belonging to a TV show." The doc and the code
comment asserted the first half as settled fact.
The union never depended on that reading — arrivals are a set difference,
so under "whole run" they are simply empty — but the comment implied an
assumption the code does not make. Say what TMDB says, note the ambiguity,
and note why either reading is safe.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
|
||
|
4grayandClaude Opus 4.8
|
0b967d66d4 |
feat(tmdb): metadata cache panel with a clear button in settings (#1244)
* feat(tmdb): metadata cache panel with a clear button in settings Adds "Metadata cache — N entries · X MB" with a Clear button to Settings > Metadata (TMDB), next to the API key it belongs to. Three things it is good for: dropping stale or wrong metadata so the next open refetches it, seeing what the cache actually costs on disk, and reclaiming rows that a lookup-key version bump has orphaned — a bump makes rows unreachable, not deleted, so nothing else would ever collect them. Sizing the cache is a full table scan (LENGTH() on TEXT counts characters, so the SUM casts to BLOB to get bytes), which is why stats load lazily and only once the TMDB section is the active one rather than on every settings open. Clearing is always safe: enrichment refetches on demand, so the only cost is the next few requests. Works in both environments — the PWA has no bridge, so the service reports and clears its session-scoped in-memory map instead. i18n: 4 keys across all 19 locales via the tools/i18n workflow; placeholder integrity verified. Contract fixtures updated for both the preload bridge and the DB-worker payload shapes. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(tmdb): make cache clearing durable and stop reporting failures as empty Four review findings, all real: - A metadata write already in flight when the user cleared would land afterwards and silently restore what they removed. Writes now carry the generation they started in; a write that outlives a clear is dropped (PWA) or undone (Electron). - The PWA byte count used String.length, i.e. UTF-16 code units, so localized payloads under-reported and disagreed with the SQLite BLOB byte count. TextEncoder now measures actual bytes. - A failed stats read returned a valid zero-entry result, so the panel claimed an empty cache and disabled Clear while rows were still there. getStats/clear now return null on failure and the panel says so instead of inventing state. - No behavioural coverage existed for either side. Tests: SQL ops (entry/byte reporting, empty table, missing row, delete count) and the service (encoded bytes, clear count, and a write racing a clear). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(tmdb): make the cache clear precise and version skew visible Review follow-ups on the cache panel: - A write that was in flight when the user cleared used to trigger a second full-table clear once it landed, which also deleted anything written in between. clear() now waits for the writes issued before it and lets the single clear take them; later writes survive. - An Electron shell without the maintenance ops fell through to the renderer map, which is always empty there — it reported an empty cache and disabled the Clear button while SQLite was full. Both operations now report unsupported instead. - Component coverage for the panel (deferred scan, clear + re-read, failed clear, failed read) and Electron-path service coverage. - The canonical IPC and settings sections of the enrichment doc, plus the matching CLAUDE.md lines, now list the maintenance ops. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(tmdb): drop Promise.allSettled from the cache clear The web target compiles against lib es2018, so allSettled broke the Windows frontend build (TS2550). The pending writes swallow their own errors, so a plain Promise.all over neutralized promises does the job. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(tmdb): keep a synchronous bridge throw inside the cache write Moving the write into a tracked promise dropped the try/catch that used to cover the call itself, so a bridge that threw synchronously would escape set(). Wrap it in an async IIFE, which turns that back into a rejection the same handler swallows. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(tmdb): retry the cache size read when the section is reopened The effect skipped the read once cacheError was set, so one transient IPC failure left the panel showing "could not read the cache" for the life of the settings page — and the only enabled control that could shift it was the destructive Clear button. Gate on the stats signal alone: reopening the section retries. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(tmdb): queue writes that start while the cache is being cleared Awaiting the in-flight writes closed one side of the race and left the other open: a set() that started during that wait dispatched its IPC immediately, was absent from the snapshot, and could reach SQLite just before the delete — so a row written after the user clicked Clear was removed anyway. clear() now holds its own promise for the whole operation and set() waits on it, which puts such a write on the far side of the delete. Rows are stamped when they are dispatched rather than when set() was called, since a write may have waited. Covered by a test that fails without the guard. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * docs(tmdb): add the release note for the cache panel Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * test(tmdb): cover the cache panel with an Electron E2E The panel drives IPC and SQLite, and nothing exercised that path end to end. The new test seeds a row through the preload bridge — enrichment itself needs a TMDB key that CI does not have — then opens the section, asserts the reported size, clears, and reads the database back to confirm the row is gone rather than merely hidden. Verified both ways: dropping the DELETE from clearTmdbMetadata fails it. Settings nav buttons gained a data-test-id so the section can be opened without matching translated labels. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 4.8
|
d76b2d2a57 |
fix(tmdb): stop a broken provider tmdb_id from suppressing enrichment (#1239)
* fix(tmdb): stop a broken provider tmdb_id from suppressing enrichment
Providers ship dead and stale tmdb_id values, and enrich() trusted them
unconditionally:
parseProviderTmdbId(query.tmdbId) ?? await resolveIdBySearch(...)
A garbage-but-integer id short-circuited the title search entirely. The
details fetch then 404'd, the outer catch swallowed it, and the item was
left permanently unenriched — no plot, no cast, no artwork — for a title
the search would have matched. Failed detail fetches cache nothing, so
the wasted request repeated on every re-open. The stale-but-valid case
was worse: it never threw, nothing sanity-checked the resolved title, and
we confidently rendered another film's metadata.
enrich() now treats the provider id as a hint. If it fails to resolve, or
resolves to something whose title matches none of the search variants we
would have queried, the confidence-gated title search gets its turn — and
proven-bad ids are negative-cached (7d, language-independent row) so the
404 is not repeated forever.
Deliberately NOT a hard rejection on title mismatch: TMDB returns titles
in the REQUEST language, so a Russian provider title legitimately fails
the name check against an en-US payload. A mismatch only lets the search
compete; when the search finds nothing confident, the provider payload is
kept. The change can therefore only add enrichment, never remove it.
Extracts the search resolution and the bad-id cache into
TmdbIdResolverService — tmdb-enrichment.service.ts was at 290 lines
against the 300-line target, and the resolver is independently testable.
Tests: new tmdb-enrichment.service.spec.ts covers the happy path issuing
exactly one details call and no search, 404 fallback, stale-id override,
the keep-the-payload safety property, bad-id skip, and the no-match case;
matcher spec covers detailsMatchProviderTitle and the namespaced cache key.
Refs docs/architecture/tmdb-roadmap.md A1.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(tmdb): only blame a provider id when TMDB confirms it does not exist
Review found the bad-id negative cache too eager in two ways, both of
which could deny enrichment to items whose id was fine.
1. Any failure recorded the verdict. A 401, 429, 5xx or an offline blip
would mark a perfectly valid id as dead for seven days, so after the
service recovered — or the user fixed their API key — titles that the
search cannot resolve confidently stayed unenriched until the marker
expired. TmdbApiService now throws a typed TmdbApiError carrying the
status, and only a confirmed 404 is recorded.
2. Title mismatches were recorded too. That id EXISTS; it is merely wrong
for this item. The row is keyed by id alone and shared across
playlists, so a stale mapping on one item disabled the direct lookup
for every other item that legitimately used the same id. Mismatches
are no longer cached at all — the search verdict is cached anyway, so
the repeat cost is a single details fetch.
Documents the row kind in the cache contract, which listed only two of
the (now six) lookup_key shapes.
Tests: 404 records, 429 does not, network error does not, mismatch does
not.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(tmdb): keep provider details when the competing search fails
detailsForProviderId only runs the search to see whether it can beat a
title-mismatched provider payload. A throw from that best-effort search
(offline, rate limit, 5xx) propagated to enrich()'s outer catch and threw
away details we already had — the searched-details fetch right below it
was already tolerant. Fail to the details in hand instead.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(tmdb): decide a suspect provider id on evidence, not on the title
The title check alone was both too weak and too dangerous.
Too weak: normalizeTitle strips trailing years, so "Blade Runner 2049"
carrying the 1982 film's id matched and the wrong film was rendered —
exactly the stale-id case this was meant to catch.
Too dangerous: an ALL-CAPS leading token reads as a language tag, so
"IT - Chapter Two" normalizes to "chapter two". The correct payload
failed the name check, and a year-less search for "chapter two" would
confidently return the 1979 film and overwrite it. Master trusted the
provider id here and got it right.
assessProviderId weighs both signals: title or year agrees means use the
details; both years known and incompatible means the search may take
over; a title-only mismatch is inconclusive and keeps the details. The
search branch now always has a year, so its own gate corroborates
whatever it returns instead of matching on name alone.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(tmdb): do not search after a transient provider-id failure
enrich() reads a null from detailsForProviderId as "the id is unusable,
try the search". A 401/429/5xx/offline failure gave it that null, so an
outage turned into a second request that would fail too — and if it did
come back, a title match replaced a provider id that was probably fine.
Only a 404 falls through to the search now; everything else rethrows and
leaves the id retryable.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* docs(tmdb): add the release note for the provider-id fix
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
|
||
|
4grayandClaude Fable 5
|
6bdd6fd8a8 |
fix(playlists): serialize per-playlist collection writes to prevent lost updates (#1255)
* fix(playlists): serialize per-playlist collection writes to prevent lost updates All per-playlist mutations (portal favorites, recently viewed, playlist meta/favorites updates) used an uncoordinated read -> patch -> replace-whole-row pattern, so two overlapping mutations on the same playlist were last-write-wins and silently dropped each other's changes (flagged by Greptile on PR #1253). Chain every read-modify-write through a per-playlist promise queue (Map<playlistId, Promise>) inside defer(), covering both the SQLite upsert and IndexedDB update paths while keeping the Observable-based public API, laziness, and emitted values unchanged. A failed mutation does not wedge the queue, and different playlists are not serialized against each other. Regression coverage: overlapping favorite+recently-viewed adds, two rapid favorite adds, IndexedDB-path overlap (all three fail on the old code), plus queue-continues-after-error and cross-playlist independence guards. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(playlists): close serialization gaps flagged by review bots Greptile P1 (writers bypassing the queue): route updateManyPlaylists and updatePlaylistPositions through the same per-playlist write queue. Auto-refresh batch writes now re-read the stored row inside the queue and preserve user-owned fields (favorites, recently viewed, position) instead of writing a pre-refresh snapshot over them; position updates re-read and patch inside the queue on both storage paths. Codex P1 (callers precompute stale snapshots): add an atomic PlaylistsService.transformPlaylistFavorites(playlistId, transform) that applies the favorites transform to the freshly-read row inside the queue, and convert every read-then-set call site to it: UnifiedFavoritesDataService M3U add/remove/clear/reorder and Stalker reorder/clear, GlobalFavoritesService M3U removal, DashboardDataService M3U removal. Reorders now keep concurrently added favorites (appended after the dragged order) instead of dropping them. New coverage: overlapping favorites transforms, auto-refresh batch write vs queued favorite add, position update vs queued favorite add, and a public addFavorite race through UnifiedFavoritesDataService; existing specs updated to the transform-based contract. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(playlists): share the canonical refresh merge with the auto-refresh batch The batch path previously spread the stale refresh snapshot over the freshly read row and pinned only favorites/recently-viewed/position, so a queued metadata mutation (hiddenGroupTitles, curated EPG sources) finishing before the refresh write could be reverted. Extract updatePlaylist's merge into mergeRefreshedPlaylist() and use it for both the single-playlist update flow and updateManyPlaylists: refresh-owned data (parsed content, count, EPG detection) comes from the payload, user-owned state comes from the current row, and manual/disabled EPG configuration is resolved through resolvePlaylistEpgSourceState instead of being overwritten. Regression test: queued hiddenGroupTitles meta update overlapping an auto-refresh batch write keeps both the metadata change and the refreshed content, including preserved manualEpgUrls. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(playlists): let the current row decide autoRefresh during batch refresh The batch path force-set autoRefresh: true after the merge, so disabling auto-refresh while a refresh was in flight was reverted by the completing write. Drop the override — mergeRefreshedPlaylist already prefers the current row's autoRefresh over the snapshot — and add a count fallback to the snapshot value for rows without a stored copy. Regression test: disabling auto-refresh concurrently with the batch write keeps autoRefresh false while still applying the refreshed content. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5
|
9885178f32 |
fix(stalker): refresh stale embedded-series snapshots from favorites and dashboard (#1253)
Favorites and recently-viewed rows store Stalker items as full JSON snapshots, so a vclub-style embedded series[] episode list froze at the moment the row was written: a series favorited when only episode 1 was out kept showing one episode forever when opened from favorites, recents, Continue Watching, or any dashboard rail. New withStalkerSnapshotRefresh() store feature renders the stored snapshot immediately and re-fetches the item from the portal in the background via a title search (get_ordered_list&type=vod&search=..., matched by id, paginated up to 5 pages, wildcard-category retry), patching fresh episodes and cmd into the active selection. The patch is guarded on both the item id and the active playlist id, since Stalker ids are only unique per portal. Only the in-memory selection is patched — the stored snapshot row is deliberately left alone, because every entry path into the detail view runs this refresh and writing it back would add an uncontrolled background writer to the whole-playlist read-modify-write that every favorite/recent mutation performs. Also fixes the stalker-mock-server embedded-series scenario, which generated series[] as objects the app's vclub adapters filter out instead of the episode-number arrays real portals send. Regular type=series and Ministra is_series items are unaffected; Xtream is unaffected (get_series_info is never cached). Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
4grayandClaude Fable 5
|
4d63f76407 |
perf(stalker): skip wasted series-seasons request for non-series items (#1241)
`setSelectedItem` mirrored every selection's id into `selectedSerialId`, and `serialSeasonsResource` fires a `get_ordered_list&type=series&movie_id=<id>` portal request on every change of that id. Opening any Stalker detail page — plain VOD, vclub items with embedded `series[]` (whose result `mapRegularSeriesSeasons` discards), Ministra `is_series` items, and ITV channel clicks — therefore issued a pointless request, on every entry path (browse, favorites, recent, dashboard, search). Set `selectedSerialId` only when `selectedContentType === 'series'`, clearing it otherwise. The gate is deliberately on content type alone, not item shape: under the `series` content type `serialSeasonsResource` is the only episode source (the detail templates render `<app-stalker-series-view />` with no `vodWithSeries` input, and `isVodSeries()` requires content type `vod`), so gating on `is_series`/`series[]` would leave a series-section item carrying either field with a silently empty episode list. Adds selection-state and request-level regression coverage, and corrects a stale invariant in the Stalker architecture docs. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 4.8
|
8e1320cb34 |
feat(tmdb): series production-status chip and person death dates (#1240)
Two fields TMDB already sends us and the merge threw away — no new API calls, no cache-key bump, they light up on existing cached payloads. Series detail views (Xtream and Stalker) gain a production-status chip: "Ended" tells you a show is finished before you commit to it, "Returning" that it is not. TMDB returns `status` as an ENGLISH string even under language=ru-RU, so it is normalized to a stable token (normalizeSeriesStatus) and rendered through translated labels (seriesStatusLabelKey). Unknown values are dropped rather than shown, so a status TMDB adds later can never leak raw English into 19 locales. Person pages render `deathday`, which mapPersonProfile has always parsed into ActorProfile and no template ever read. i18n: 7 keys across all 19 locales via the tools/i18n workflow. Tests: status normalization (token mapping, case-insensitivity, the British "cancelled" spelling, unknown/missing dropped). Docs: tmdb-metadata-enrichment.md, CLAUDE.md. Refs docs/architecture/tmdb-roadmap.md C1 and the zero-extra-call tier. Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5
|
4ca2b6852e |
feat(playback): Up Next episode rail for the inline series player (#1231)
* feat(playback): Up Next episode rail for the inline series player On wide windows the inline series player now docks left and fills the leftover stage column with a Netflix-style "Up Next" rail: the rest of the current season plus next-season spillover, the playing episode highlighted, and watch-progress bars from playback positions. Clicking an episode plays it inline through the host's existing episode flow (Xtream serial-details and Stalker series view). - New app-up-next-rail component + buildUpNextRailItems() util in ui/playback; entries carry the host's raw episode object so selection needs no id lookup. - PortalInlinePlayerComponent measures the theater stage with a ResizeObserver and docks the rail only when the leftover beside the 16:9 player is >= 320px; narrower stages keep the centered theater/ambient behavior from #1223. Movies and live never show the rail. - New playerUpNextRail setting (Settings > Playback, default on, built-in web players only), mirroring playerAmbientMode; enforced at runtime for non-web engines. - i18n: SETTINGS.PLAYER_UP_NEXT_RAIL(+_DESCRIPTION) and PORTALS.UP_NEXT in all 18 locales. - The rail renders as an opaque panel on top of the stage, so the ambient fill stays behind it. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(playback): address Greptile review on the Up Next rail - Stage overflow: `.player-shell__viewport` had no border-box sizing (the repo has no global reset), so the docked-rail modifier's 12px padding widened the stage past its container and the right edge was clipped. - Width gate: compute the width the rail actually receives (stage minus the docked layout's padding, the height-driven 16:9 player, and the flex gap) instead of raw stage slack, and observe the stage's border box so the modifier's own padding cannot feed back into the measurement. - Stalker lazy seasons: Ministra VOD-series seasons hold no episodes until opened, so the rail's next-season spillover stopped at the current season. Prefetch the following season while an episode plays inline. Adds regression coverage for the gate boundary, gate stability across the padding toggle, and the lazy-season prefetch. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(stalker): stop the rail spillover prefetch from retrying forever A failed or genuinely empty Ministra season resets isLoading while leaving episodes empty, so the prefetch effect re-requested the same season on every emission for as long as inline playback continued. Remember which seasons this view already requested and ask at most once each. Regression test asserts the empty-response case fetches exactly once and does not retrigger on further playback in the same season. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(stalker): let a failed spillover prefetch recover on the next episode The previous guard was permanent, so a transient network or authorization failure disabled the rail's next-season prefetch for the component's lifetime. Distinguish the two outcomes instead: - Answered (even with zero episodes) — a real answer, never asked again. - Failed — the claim is released, but pinned to the episode that triggered it, so the retry waits for the next playback change. Retrying immediately would loop, since the failure itself flips isLoading and re-runs the effect. The claim is taken synchronously; awaiting first let the isLoading flip re-run the effect and fire a duplicate request before the answer arrived. `loadEpisodesForSeason` now reports whether the portal answered; existing callers ignore the result and are unaffected. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
4grayandClaude Fable 5
|
b94f40dc74 |
feat(i18n): add Hungarian translation (hu) (#1236)
Integrate the community-contributed Hungarian translation by Tibor Hermann (@htibcsike) as the 19th locale: - add apps/web/src/assets/i18n/hu.json (1,142 of 1,175 keys translated; 32 keys added after the contribution fall back to English, plus the new LANGUAGES.HUNGARIAN endonym) - register HUNGARIAN = 'hu' in the Language enum, SUPPORTED_LANGS, Angular date locale registration, and the TMDB language map (hu-HU) - add LANGUAGES.HUNGARIAN = "Magyar" to en.json and all other locales via tools/i18n/fill-missing.mjs - update README.md and CLAUDE.md language counts to 19 Closes #1192, refs #1140. Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
4grayandClaude Opus 5
|
f852bc7459 |
fix(playlists): report failed playlists in the startup auto-refresh toast (#1235)
The startup auto-refresh always opened the `HOME.PLAYLISTS.AUTO_REFRESH_UPDATE_SUCCESS` snackbar, even when the backend had dropped playlists it could not refresh. Isolating per-playlist failures (#1233) means the result set is lossy by design, so an unreachable source that now fails within `PLAYLIST_FETCH_TIMEOUT_MS` produces a false success toast. `autoUpdatePlaylists()` now returns `AutoUpdatePlaylistsResult` — the refreshed playlists plus one outcome per requested playlist (`updated` / `failed` / `skipped`), in request order — on top of the existing bounded-concurrency refresh. The renderer derives the message from those outcomes: - all updated -> `AUTO_REFRESH_UPDATE_SUCCESS` (unchanged) - some failed -> `AUTO_REFRESH_UPDATE_PARTIAL` (error styling, dismissable) - some failed and some skipped -> `AUTO_REFRESH_UPDATE_PARTIAL_WITH_SKIPPED` - none updated -> `AUTO_REFRESH_UPDATE_FAILED` (error styling, dismissable) - only sourceless playlists left over -> `AUTO_REFRESH_UPDATE_SKIPPED` Playlists with neither a URL nor a file path are reported as skipped rather than failed, since there is no source to refresh them from. The mixed failed+skipped message exists because the plain partial text names only updated/total/failed, which would leave the skipped playlists as an unexplained remainder. Titles of unresolved playlists are logged for diagnosability. Tests: five new `electron.service` cases (one per message branch), outcome assertions across the existing `playlist-auto-update` and `playlist.events` specs, and an Electron E2E that restarts the app against a killed playlist server — verified to fail against the old unconditional toast. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
4grayandClaude Fable 5
|
b4c0cce741 |
fix(backup): export and restore hidden Xtream categories by real xtream IDs (#1224)
Category rows crossed the DB-worker IPC boundary with Drizzle's camelCase property names while the renderer contracts declare snake_case, so backup export dropped hidden-category IDs and restore degraded to a type-only match that hid every category. Project category ops to the declared wire shape, normalize restore state from untrusted sources (dropping entries without a numeric xtreamId), reject entries with missing user-state collections, and add full export→import round-trip coverage (unit manifest-equality + Electron e2e) plus regression tests. Closes #1017 Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
4grayandClaude Fable 5
|
bd07e17857 |
feat(m3u): DASH + ClearKey playback via Shaka Player (#1225)
* feat(m3u): extract ClearKey DRM from #KODIPROP playlist lines Adds the typed ChannelDrm model (shared interfaces) and a KODIPROP post-processing step in createPlaylistObject() — the single funnel for all four playlist import paths. Parses inputstream.adaptive.license_type, license_key and drm_legacy; ClearKey keys accepted as kid:key hex pairs, W3C ClearKey license JSON, or a plain kid→key JSON map. Unsupported license types (Widevine/PlayReady/license URLs) are preserved with supported=false so playback can surface a DRM diagnostic instead of failing silently. Also adds isDashStreamUrl/isDashChannel helpers for DASH routing. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * feat(playback): add Shaka DASH source engine with ClearKey support Introduces ShakaVideoSession (libs/ui/playback/src/lib/shaka-engine/): a lazily imported shaka-player engine (separate lazy chunk, ~217 KB transfer) owning attach/configure/load with an operation queue and generation guard against channel-switch races. Channel ClearKey config maps to drm.clearKeys; channels with an unsupported license type emit a DrmOrEncryption diagnostic without starting an engine. Shaka errors are classified into the existing playback diagnostics (PlaybackDiagnosticSource.Shaka). Wires the engine into both built-in players like hls.js/mpegts.js: - HTML5: extension === 'mpd' branch in playChannel(); hls/mpegts/native glue extracted to helpers to keep the component within the size budget - ArtPlayer: customType 'mpd' in ArtPlayerSourceSession (+ getDrm seam) - Shared controls: WebVideoControlsSource kind 'shaka' + WebVideoShakaControls using the Shaka 5 text model (selectTextTrack(null) hides subtitles; Player.setTextTrackVisibility no longer exists) Adds a CJS shaka-player jest stub (video.js precedent) for web specs. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * feat(m3u): route DASH channels to the inline Shaka-capable player DASH (.mpd) channels always play in a built-in web engine (radio precedent): external MPV/VLC cannot receive KODIPROP ClearKey configuration (VLC upstream #29465) and Video.js has no DASH bridge yet. - shouldShowInlinePlayer() bypasses the external-player setting for DASH - new shouldAutoLaunchExternalPlayer() guard consolidates the MPV/VLC auto-launch conditions in the m3u-state effects (incl. catch-up path) - the M3U page overrides the player for DASH channels: ArtPlayer stays ArtPlayer, everything else falls back to the HTML5 player - ChannelDrm is passed through ResolvedPortalPlayback into the synthetic player-view channel Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * test(e2e): add offline DASH ClearKey fixtures and e2e coverage Fixtures (apps/web-e2e/src/fixtures/dash/): ~4s VP9+Opus DASH, clear and CENC-encrypted variants with fixed synthetic ClearKey credentials. Content synthesized by ffmpeg; encryption done by Shaka Packager because ffmpeg's mp4 muxer writes senc-only metadata (Chromium needs saiz/saio) and cannot produce the subsample encryption the VP9 CENC binding requires. Generation script + README document regeneration. web-e2e (Chromium): import an M3U with KODIPROP ClearKey via raw text, verify encrypted and clear DASH actually play (currentTime advances, no diagnostic banner) and that an unsupported license type (Widevine) surfaces the DRM diagnostic. Fixtures are served through Playwright route interception with HTTP Range support; the Angular service worker is blocked since SW-routed requests bypass interception. electron-backend-e2e: the same happy path + negative against a local Range-aware fixture server — the automated proof that ClearKey EME works in the real Electron runtime (file:// secure context). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * docs: document DASH + ClearKey playback architecture Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(pwa): extract KODIPROP DRM on the web-backend /parse import path The web-backend keeps its own playlist builder for the PWA URL-import path, so the shared createPlaylistObject() DRM hook never ran there and encrypted DASH channels imported by URL reached Shaka without keys. Apply extractDrmFromRaw() in that builder too and cover the path with a regression test. Addresses Codex review on PR #1225. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(playback): interrupt stalled Shaka loads and destroy failed engines Two review findings on the ShakaVideoSession lifecycle: - stop()/start() now tear the current player down immediately instead of queueing the destroy behind the in-flight operation. Shaka's destroy() interrupts a pending load() (LOAD_INTERRUPTED), so a stalled manifest fetch can no longer wedge the operation chain and block the next channel start (Codex P1). - A rejected attach()/load() now destroys the failed player after emitting the diagnostic, so a non-functional engine never stays attached to the media element or exposed to the shared-controls bridge (Greptile P1). Regression tests cover both paths. The Shaka fakes are consolidated into a shared jest-free test double that mirrors the destroy-interrupts-load semantic, and the ArtPlayer source-session spec is split (fixtures + DASH cases) to stay within the max-lines lint budget. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(m3u): unify DASH URL detection with playback extension normalization isDashStreamUrl() used the simpler getStreamExtensionFromUrl(), so URLs the player engines classify as DASH (stream.MPD, ?ext=mpd, ?format=mpd) were not routed to the Shaka-capable inline player and lost their ClearKey metadata with Video.js or external players configured (Codex P2). The normalized getPlaybackMediaExtensionFromUrl() now lives in @iptvnator/shared/m3u-utils (re-exported unchanged from the playback lib) and both routing and engine selection share it. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * chore(lint): satisfy CI lint and CodeQL in DASH support files - replace shell-built tar/npm commands with execFileSync arg arrays in the fixture generator (CodeQL: uncontrolled shell command) - give jest stub methods explicit bodies (no-empty-function) - compact the diagnostic label switches in WebPlayerViewComponent to stay under the max-lines budget Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(playback): tear down the Shaka engine on critical error events too A non-recoverable Shaka error emitted after a successful load left the dead engine attached to the media element and exposed to the shared-controls bridge (Greptile P1, round 2). Critical error events now destroy the player right after the diagnostic is emitted, matching the load-failure path. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(m3u): honor DASH catch-up URLs and drop unusable DRM fallbacks Two Codex round-2 findings: - The inline-playback DASH gate only examined the channel URL, while the external-player guard checks the resolved catch-up URL — a replay that resolves to an .mpd manifest with MPV/VLC configured ended up with no player at all. The gate now uses the effective playback URL (activePlaybackUrl ?? channel.url). - The unsupported-DRM diagnostic advertised MPV/VLC fallback actions, but external players cannot receive the KODIPROP license config either — the diagnostic no longer recommends them. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(playback): suppress unusable external fallback for ClearKey DRM failures Runtime DRM errors on channels that carry KODIPROP ClearKey config (wrong or rotated keys) advertised MPV/VLC fallback actions, but external players never receive the license config — the fallback could only fail differently. DRM-classified diagnostics from such channels no longer recommend external players; clear channels keep the hint. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(m3u): symmetric DASH inline gate and lazy DRM for pre-upgrade playlists - The inline DASH gate is now true when either the channel or the resolved catch-up URL is DASH, mirroring the external-player guard — a .mpd channel whose catch-up resolves to .m3u8 no longer ends up with no player at all. - Playlists imported before the DRM feature carry no drm field, but the raw KODIPROP block survived in the stored items; the M3U page now falls back to extractDrmFromRaw(channel.raw) at playback time, so encrypted channels work without a re-import (Channel gains raw?). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * docs: sync the DASH/Shaka contract across agent docs Mirrors the DASH/Shaka source-engine contract into AGENTS.md and adds Shaka to the shared web-video bridge descriptions in CLAUDE.md and the player-controls contract; documents the lazy raw-KODIPROP DRM fallback for pre-upgrade playlists in the M3U architecture doc. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(playback): reset the media element for rejected DRM and widen ClearKey fallback suppression - Switching from a playing stream to an unsupported-DRM DASH channel loads no new source, but play() still ran and the un-loaded element could resume the previous stream underneath the diagnostic banner. The HTML5 player now resets the element instead of playing. - Any inline failure on a KODIPROP ClearKey channel (manifest, codec, media, network — not just DRM-category errors) is unsolvable in MPV/VLC, which never receive the license config; the external fallback hint is now suppressed for all diagnostics of such channels. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(playback): restore suppressed DASH captions when the preference re-enables The Shaka bridge dropped the auto-selected text track with selectTextTrack(null) when showCaptions was off, but did not remember it — re-enabling the preference mid-session left captions permanently off (HLS/native bridges already restore). The session now remembers the suppressed track id and reselects it via the bridge's caption-state pass; suppression is also skipped when no track is active. Covered by session and new WebVideoShakaControls specs. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * chore: retrigger CI GitHub Actions created no check suites for the last three pushes to this branch (third-party apps received the webhooks); an empty commit re-fires the push and pull_request events. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * refactor(playback): split oversized Shaka session and HTML5 spec files CI lint enforces max-lines 400: extract ShakaTextTrackSuppression and the shaka-error helpers out of ShakaVideoSession, and move the DASH-specific HTML5 player test into its own spec. No behavior change. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * ci: allow manual dispatch of the cross-platform E2E workflow GitHub stopped delivering push/pull_request events for this branch; workflow_dispatch provides a manual escape hatch (CI and build-and-make already have one). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
4grayandClaude Fable 5
|
6dc8a10d52 |
feat(playback): show media title overlay in fullscreen shared controls (#1228)
* feat(playback): show media title overlay in fullscreen shared controls In fullscreen with the shared player-controls layer, a pointer-transparent overlay at the top of the player now names the content while controls are revealed: one line for movies and live channels, two lines for series (series name + S01E03 label). The overlay follows the bar's auto-hide transition and stays hidden outside fullscreen, where page chrome already names the content. Data flows top-down: the Xtream/Stalker series detail views pass the series name via a new PortalInlinePlayerComponent.seriesTitle input (Xtream episode playback titles carry the episode name, not the series), the inline player builds the two-line form from the episode metadata label, and WebPlayerViewComponent falls back to playback.title for movies/channels while skipping raw stream-URL fallbacks. All four shared-controls hosts (HTML5, Video.js, ArtPlayer, Embedded MPV frame-copy) forward the value. To stay under the max-lines limit, scrub/timeline state is extracted into ControlsTimeline and the playback-diagnostics display helpers into web-player-view-diagnostics.utils.ts, with behavior unchanged. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * docs: mirror fullscreen media-title contract into AGENTS.md Addresses Codex review: the Shared Player Controls section in AGENTS.md must stay in sync with the CLAUDE.md description of the new mediaTitle input, fullscreen overlay behavior, and series-title wiring. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
genrichh93-ui
|
188f5c4b56 |
feat(downloads): pause and resume support for the download manager (#1147)
Adds a paused state to the Electron download manager with a full partial-file lifecycle: - Pause keeps the .part and byte progress; cancel discards them; every lifecycle stage (queued, active, mid-transfer) is pausable. - Resume continues via HTTP Range with If-Range entity validation (strong ETag / Last-Modified persisted in the new resume_validator column, idempotent migration incl. legacy-table rebuild). Non-206 answers restart from zero over the same .part; the 206 Content-Range offset is verified; responses that end before the advertised size are retained for a Range retry instead of being committed as completed. - Crash recovery converts interrupted transfers to paused, keeps queued-with-partial rows resumable, and commits finalizations that crashed before the DB update. - Destination collisions are non-destructive (retained partials finalize to the next numbered name); locked .part files never lose their DB owner across cancel/remove/restart; resume claims rows atomically and the queue dedupes ids. - Stored request headers are re-filtered through the User-Agent/Origin/Referer allowlist on read, URL-derived extensions are sanitized, resume appends never follow symlinks, and transfer errors are logged by message only. - UI: pause/resume/cancel/retry/remove surface failures in a snackbar; paused items show an active Resume button in VOD/episode detail views; translations for all 18 locales. - Runtime split into download-runtime/transfer/finalize/broadcast modules; +30 unit tests and an Electron E2E covering pause -> retained .part -> Range/If-Range resume -> byte-exact assembly. Co-authored-by: genrichh93-ui <genrichh93@users.noreply.github.com> 🤖 Generated with [Claude Code](https://claude.com/claude-code) |
||
|
4grayandClaude Fable 5
|
0273ded8e2 |
fix(tmdb): resolve season number from title markers for per-season series slices (#1229)
* fix(tmdb): resolve season number from title markers for per-season series slices
Providers often slice a show into per-season catalog items ("The
Mandalorian (2 season)", "Пацаны 2 сезон", "The Boys S05") and renumber
the single contained season to 1, so season enrichment fetched the wrong
TMDB season (season 1 metadata for a season 2 item).
- new season-marker.util.ts in shared/interfaces: extractSeasonFromTitle
(word-first, number-first and S-form markers, bracketed or trailing)
and resolveEnrichmentSeasonNumber (title marker wins only for
single-season items whose provider number disagrees)
- wired into Xtream enrichSerialSeasonWithTmdb and the Stalker
series-view season service (cache/overlay still keyed by provider
season key)
- SEASON_SUFFIX_PATTERN now also strips number-first season suffixes
("2 season", "2 сезон", "2-й сезон" incl. NFD-decomposed ordinals) so
such titles match the show at all
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(stalker): wait for the season map before TMDB season fetch
The TMDB match can arrive before the async season resource; fetching
then passed seasonCount 0, suppressed the title-marker override and
cached the wrong season forever (fetchSeason is idempotent). The effect
now reads the season map tracked and skips while it is empty —
overlay-driven re-runs are safe because fetchSeason early-returns per
(tmdbId, seasonKey).
Addresses Greptile review on #1229.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(stalker): reset season selection on detail-to-detail navigation
The router reuses the series view for detail-to-detail navigation, and a
retained season selection let the NEW item's tmdb_id pair with the
PREVIOUS series' season context in the TMDB fetch effect, poisoning its
idempotent per-season cache before the new season resource loaded. The
selection is now a linkedSignal keyed on the displayed item's identity —
compared inside the computation, since displayItem produces a fresh
object on every recomputation.
Addresses Greptile review round 2 on #1229.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(stalker): include the resolved season in the TMDB season cache identity
Per-season slices of one show share (tmdbId, provider season key "1")
but resolve to different TMDB seasons — plain key idempotency served the
first slice's episodes to every later slice. Each cache entry now
records the resolved season it was fetched for: a call resolving a
different season refetches and overwrites (also self-healing a fetch
made with stale navigation context), an in-flight marker dedups
concurrent runs, and a superseded fetch may not store its result.
Failed fetches stay uncached so later triggers retry.
Addresses Codex review (P1) and Greptile review round 3 on #1229.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(stalker): drop a mismatched season cache entry before its replacement fetch
If a replacement fetch (same key, different resolved season) failed, the
previous slice's entry stayed visible indefinitely through overlay() and
descriptions(). The mismatched entry is now removed up front, so a
failed replacement falls back to provider data until a retry succeeds.
Addresses Codex review (P2) on #1229.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(stalker): title-based season reset identity and o_name marker support
- The season-selection reset identity now combines provider id and title:
distinct items can share or lack provider ids, and an id-only identity
retained the previous item's selection across such navigation
- The season marker is read from whichever title field carries it via
pickSeasonMarkedTitle: providers put the descriptive title in o_name
while name stays generic, and the show-level match already used o_name
Addresses Greptile review round 4 (P1) and Codex review (P2) on #1229.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(stalker): gate TMDB season fetch on resource coherence, not selection resets
Resetting the parent season selection on item identity change (previous
round) silently disabled enrichment after detail-to-detail navigation
between items sharing one season-key set: the season container keeps its
own selection and deduplicates seasonSelected emissions, so the parent
key stayed null forever. The reset is gone; instead the fetch effect
gates on coherence — it waits while the season resource reloads (the
window in which a reused component pairs the new item's tmdb_id with the
previous item's map) and requires the selected key to exist in the map
with episodes. Stale-snapshot fetches remain self-healing through the
resolution-aware cache.
Addresses Codex review (P2) and Greptile review round 5 on #1229.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
|
||
|
4grayandClaude Opus 4.8
|
5aa44d19d4 |
feat(tmdb): clickable director/creator chips and directing credits on person pages (#1227)
* feat(tmdb): clickable director/creator chips and directing credits on person pages Directors were plain merged text — no photos, no navigation — while the data was already sitting in the cached TMDB payloads (credits.crew and created_by both carry id + profile_path; they just were not typed or parsed). - tmdb-merge: enrichedDirectors (crew, job === 'Director', deduped by person id) and enrichedCreators (created_by) produce the same chip shape as the cast (TmdbEnrichedCastMember) into a new tmdb_directors field on all three merges (Xtream VOD, Xtream series, Stalker); types widened (crew id/profile_path, created_by id/profile_path). - Detail views (shared VodDetailsComponent, Xtream vod/serial routes, Stalker series view) render the Director row as clickable avatar chips when tmdb_directors is present — same markup and openActor handler as the cast strip — falling back to the plain text otherwise. Stalker re-normalization allowlist preserves the new field. - Person pages: mapPersonFilmography now merges combined_credits.crew (jobs Director/Creator) into the filmography — acting wins the per-title dedup, directing-only titles show the job in the character slot. Everything else (library matching, All-portals scope, filters, search fallback, back button) works unchanged because the person page is role-agnostic. Existing caches work as-is: crew/created_by were always part of the stored payloads. Tests: merge spec (director/creator chips + crew-row dedup ×3 merges), person spec (crew credits, Producer excluded, acting-wins dedup), stalker-vod.utils passthrough. Docs updated (CLAUDE.md + architecture). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(tmdb): address director-pages review — split oversized spec, stable track keys, translated crew roles - tmdb-merge.spec.ts grew past the 400-line lint ceiling — the Stalker merge suite moved to tmdb-merge-stalker.spec.ts (fixes the CI Lint job). - All cast/director chip loops now track by TMDB person id with an index fallback ('p<id>' / 'i<index>') instead of member.name — distinct people can share a name and creator payloads carry no dedup (greptile). - Directing-only filmography credits carry the role in a new crewJob field ('Director' | 'Creator') instead of stuffing TMDB's raw English job into character; ActorViewComponent renders it through translated labels (XTREAM.CREW_JOB_DIRECTOR/CREATOR, added to all 18 locales via the i18n patch workflow, matching each locale's existing glossary — pt "Diretor", de "Regisseur") (Codex). Tests: person spec asserts character/crewJob separation; merge suites green after the split (15 + stalker file). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |